Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAdmitted-Finance | ₹4.6 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Sumit Kumar L1 |
|---|---|---|---|---|
| 1.00Sub-Head : Concrete Work | ||||
| 1.01Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : | ||||
| 1.02 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | Cum | 9,500 ₹9,500 |
| 2.00Sub-Head : Roofing | ||||
| 2.01 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 22 | Sqm | 1,100 ₹24,200 |
| 3.00Sub-Head : Repairs to Buildings | ||||
| 3.01Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. | ||||
| 3.02 | With cement mortar 1:4 (1cement: 4 coarse sand). | 10 | Sqm | 400 ₹4,000 |
| 3.03 | Uprooting of trees /saplings grown up on the roof at 5 different locations by dismantling mudphaska tile and relaid the same in proper grade as per the direction of Engineer in charge | 1 | Job | 3,500 ₹3,500 |
| 4.00Sub-Head : Repairs to Buildings | ||||
Tender Value
₹4.7 L
EMD Value
₹9,464
Closing Date
18 Apr 2026, 6:00 pmClosed
Executive Engineer (C),
Executive Engineer (C), BSNL CIVIL DIVISION SUNDER NAGAR
Miscellaneous Civil work in Admin and TRA Building Hamirpur Distt Hamirpur HP
2026_BSNL_274472_1
01/EE/BSNL/CD/SNR/2026-27
Open Tender
Civil Works
60 days
HAMIRPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer Cash O/o GMTD Hamirpur HP
₹9,464
Yes
24 Apr 2026
10 Apr 2026
21 Apr 2026
10 Apr 2026
18 Apr 2026
10 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Sub-Head : Concrete Work | |||||
| 1.01 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : | - | - | - | - |
| 1.02 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | Cum | - | - |
| 2Sub-Head : Roofing | |||||
| 2.01 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | Sqm | - | - |
| 3Sub-Head : Repairs to Buildings | |||||
| 3.01 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. | - | - | - | - |
| 3.02 | With cement mortar 1:4 (1cement: 4 coarse sand). | - | Sqm | - | - |
| 3.03 | Uprooting of trees /saplings grown up on the roof at 5 different locations by dismantling mudphaska tile and relaid the same in proper grade as per the direction of Engineer in charge | - | Job | - | - |
| 4Sub-Head : Repairs to Buildings | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.95 MB
BOQ_320405.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid