Proposal for Construction of Swimming Pool at Mulugunda city, Gadag district

Proposal for Construction of Swimming Pool at Mulugunda city, Gadag district

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates ...

Supplying, Fitting and Placing TMT Fe 500 and above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications.

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percentage and conforming to IS: 15622, of approved make, in all colours and sh...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Providing and laying 48mm x 48mm Porcelain tiles of make Pixel or equivalent Or 24.7cm X 12.2 cm mosaic tiles of make Johnson endura of approved colour and shade for water body laid over rcc surface...

Providing Water for testing, Dewatering and Pumping charges complete, (Market Rate)

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete M25 for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...

Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS:...

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08percentage and conforming to IS:15622, of approved brand and...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspen...

FILTERTANK :- Supply of Imported fiber glass pressure sand filter AQUALUX make tank of dia 1600mm fitted with pressure guage , manual air bleeder, water drain and Emptying Plug fitted with collector h...

Removing and replacement filter media M.G.F. Conferming to standerd specification, with all necessary labour, lead and lift materials etc complete. Rejuvenation and replacement of filter media in MGF...

Centrifugal Cast Iron Pumps, Mechanical Seal in Stainless Steel. I.P.-54 motor protection. Stainless steel AISI -420 shaft. With in built strainer basket. Conn. PN-16 according to DIN2501. Flowrate : ...

BUTTERFLY VALVES AND FLANGES:- PVC Butterfly Valves and NRV of 110mm with PVC flange Adapter, with nuts and bolts Make: Supreme / Cepex / Equivalent

STAINLESS STEEL MAIN DRAIN:- Made out of Stainless Steel sheet ( 16 guage x 304 guage with Stainless Steel circles and and Stainless steel bolts etc complete including fixing fabricating Turning cutt...

Kids pool 350mm X 350mm

FLOOR INLETS:- Providing , Supplying and fixing of Imprted floor Inlet made of ABS Plastic Multiflow and external thread (AQUALUX make) including transporation , lifting and Unloading inclusive all...

S.S. LADDERS FOR 2 STEPS : Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of one and half dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G....

S.S. LADDERS FOR 3 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 3 steps ( SS Pipe of one and half dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G...

S.S. LADDERS FOR 5 STEPS :- Providing Supplying and fixing Stainless Steel ladder OF Standard Design ( 304G) for 5 steps ( SS Pipe of one and half dia x 16guage x 19 dia x 16 guage S.S Sheet of 16 G...

TROLLEY SUCTION SWEEPER:- Providing supplying and fixing Trolly Suction Sweeper fabrication of M.S Trolly , with Supply of 2 HP Self priming Pump ( Kirloskar / equivalent make) with prefilter with Sta...

LEAF RAKE:- Providing Supplying of Leaf Rake made out of alluminium pipe of Standard make and Deep bag net in Nylon including transporation , lifting and Unloading inclusive all Taxes HOM of Machin...

TEST KIT :- Providing supplying Test Kit to check free Chlorine and PH of the Swimming pool water including transporation , lifting and Unloading inclusive all Taxes HOM of Machinaries , Fabrication...

Chemical for Start up :- Providing Supplying of Trichloroisocyanuric acid (TCCA90) including transporation , lifting and Unloading inclusive all Taxes complete as per additional Technical, Bid Docu...

POOL BRUSH ( FOR WALL and FLOOR):- Providing Supplying of Pool brush ( for wall and Floor ) of Stainless Steel body with Nylon Bristle including transporation , lifting and Unloading inclusive all ...

P.P GRATINGS ( MILKY WHITE):- Supplying and fixing PP Gratings ( Milky white) over flow gutter gratings made of Polyprolene materials of standard size and diamentions used for swimming pools includ...

SS RINGS FOR LANE SEPARATOR:- Providing Supplying SS. Rings for Lane separator fabricated in 4" dia x 16 G x 304 G Pipe with S.S Rod including transporation , lifting and Unloading inclusive all Ta...

PLUMBING - All allied fixtures and fittings Complete for complete working of the swimming pool. All items to be of IS standard and reputed make.

Line separator(Float lane)

Starting block for swimming pool [improved Stainless steel with fiber] made of AISI-316 Stainless steeladjustable polyester and fibreglass non-slip platform measuring 500mm X 500mm, 400mm height

INSTALLATION :- Installation of all the equipments for the purpose of functioning of swimming pool with necessary staff men material labours, including transportation, lifting and unloading inclusive ...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Providing and installing at site of work PVC pipes of 10kg/sqcm including cost of pipes and fittings like elbow, bend, collar, tee etc. and labour, including lowering into trenches, laying true to lin...

Commissioning the pool and traning for 1 week about pool maintenance

Control panel board which includes Fabricated MS Powder coated box, with the fixtures like MCB, ammeter, volt meter, etc. complete

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C...

Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (Vol-2 ...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Clas (Vol-2 It no-14.55 Pg no-139)

Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Vol-2 It no-14.67 Pg no-141)

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements and all necessary accessories complete (Vol-2 It no-13.59 Pg no-127)

Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class (Vol-2 It no-14...

Providing and fixing PTMT, push cock of approved quality and colour.(Vol-2 It no-13.21.1 Pg no-120)

Providing and fixing Overhead rain showers of minimum dimension 225x225mm and wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class ...

Providing and fixing 20mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...

Providing and fixing 25mm dia chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Fixing, installing and testing 15mm CP health faucet of approved make with necessary CP flexible hose 1000mm long nozzle, CP wall flange, CP angle cock etc., complete. MR

Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accessories complete - Class (Vol -2 IT no-14.54 Pg no- 139,)

Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., an...

Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverte...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200...

Supplying and fixing PVC/metal conduit Deep junction box. (Sl.No.1., Item No.1.5.2, Page No.2 , PWD Ele SR 2 2023-2024).

Supplying And Fixing Metal Fan Box with Round Hook.(Sl.No.1, Item No.1.13, Page No.4 , PWD Ele SR 2 2023-2024).

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth ...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth ...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase and Neutral) and 1x1.0 mm2 (Earth ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...

Supplying, Wiring and Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit..The pit shou...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One way Switch. (Sl.No.3, Item No.3.6.1, Page No.9, PWD Ele SR 2 2023-2...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three way Socket. (Sl.No.3, Item No.3.6.3, Page No.9, PWD Ele SR 2 2023...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module. (Sl.No.3, Item No.3.6.4, Page No.9, PWD E...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One way Switch.(Sl.No.3, Item No.3.6.7, Page No.9, PWD Ele SR 2 2023-20...

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch.(Sl.No.3, Item No.3.6.9, Page No.9, PWD Ele SR 2 2023-2024).

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.(Sl.No.3, Item No.3.6.10, Page No.9, PWD Ele SR 2 20...

Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V PLUG (Sl.No.3, Item No.3.13.4, Page No.9, PWD Ele SR 2 2023-2024).

Supplying and fixing of metal clad industrial plugs and sockets.3pole+earth 440V SOCKET (Sl.No.3, Item No.3.13.8, Page No.9, PWD Ele SR 2 2023-2024).

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Bakelite Ceiling Rose.(Sl.No.3, Item No.3.14.5, Page No.9, PWD Ele SR 2 2023-2024).

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder.(Sl.No.3, Item No.3.14.7, Page No.9, PWD Ele SR 2 2023-2024).

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using ...

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63A(Sl.No.5, Item No.5.7.3, Page No.14, PWD...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (Sl.No.5, Item No.5.27, Page No.19, PWD Ele SR 2 2023-2024).

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (Sl.No.5, Item No.5.28, Page No.19, PWD Ele SR 2 2023-2024).

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. (Sl.No.5, Item No.5.29, Page No.19, PWD Ele SR 2 2023-2024).

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Sl.No.5, Item No.5.35, Page No.19, PWD El...

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotatin...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.(Sl.No.5, Item No.5.38, Page No.19, PW...

Supplying 100 A 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable colo...

Fabricating supplying and mounting MS box made out 16SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, ...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and w...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of a...

Supplying of LED light fitting 1 x 4' - 36/40 W -PVC Batten with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CR...

Supply of 200W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare ...

Supplying and Fixing 32.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed fo...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.. (Sl.No.13, Item No.13.5, Page No.56...

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0...

Erection of single phase preventer / ammeters / including fixing selector switch / voltmeter / current operated earth leakage circuit breakers / voltage operated ...

1.1 kV,XLPE or Heat resistant PVC insulated, PVC exutruted Inner sheathed armoured LYUG cable as per IS -1554(Part 1 )or IS 7098 Part-1, Armouring strip thickeness and resistivity as per IS-3975. (Sl....

Epoxy Terminating kit (Pot head) suitable for 1.1kV, LT UG Cable.(Sl.No.249, Item No.35.01, Page No.15, ESCOMs SR 2 2023-2024).

Laying of cable in existing trench/ GI pipe/ Stone ware/ RCC Hume pipe using wooden/ Aluminium rollers as directed by the department staff. LT Cable. 2.5 to 25Sqmm. (Sl.No.174, Item No.21.05, Page No....

Earth work excavation by manual means for drains waste weir, draft approach channels, key trenches foundation of building and bridge and such canals and similar works in all kinds of soils , as per ...