PROVISION OF SWM PLANT AT JCO AND OR ACCN UNDER GE (N) AHILYANAGAR

M&L for Hopper fabricated by S.S. plate (3 mm thick) powder coated to suit inclined Conveyor (45 degree) and size will be 10 X 5 feet along with Vibrant type motor with stator, ON/OFF type of capacity ½ HP. Make - L&T or equivalent as approved by GE.

S&F Trommel / Horizontal Screening Machine: Motor 5 HP, 1440 rpm, 440 V, Gear Box 110mm, Ratio 1:40, Warm type, Slope 1 ½” per feet, 3mm Filter Screen dia 4’, length 14’, Screen rpm 10, Structure of Trommel made of 100mm X 100mm square pipe, 50mm X 50mm square pipe, 100mm X 50mm C-channel, Cover of Trommel made of 25mm X 25mm Square pipe and 18 Gauze MS Sheet. Trommel Size 4 Feet dia x 10 Feet long main screen mesh. 3 mm thick mild steel, 50 mm dia Hole Cutting, 4 feet dia finished. Mesh 3mm thick mild steel, Hole dia 10mm with side ring sq Rod. 20mm sq main screen mesh inside spiral type flat, Trommel stand, C channel. 4” x 50 mm (2 Inch) mild steel structure. Screen side ground, mm sheet. Trommel Raining Shaft En8 (metal) 40mm dia Rod. 12 Feet long with round 4 Nos Tire wheel, high quality with gear motor, speed 1440 RPM. suitable gear box, 40:1/50:1. ratio of make Hindustan Make - L&T or equivalent as approved by GE including all mild steel material spray painting complete all as specified and directed by Engineer-in-Charge.

S&F Conveyor: Motor 3HP, 1440 rpm, 440V, Gear Box 90mm, Ratio 1:30 Warm type, Inclination of Conveyor 27 degree, width of conveyor Structure 1000mm, width of conveyor belt 800mm, Length of the conveyor 7 to 10 Mtrs, Height of the Conveyor 8’ to 9’, Head and tail drums 150mm dia, Rollers at 1 No. per Meter of 75mm dia, Structure Made of C-channel 75mm X 40mm (MS). Belt Conveyor size 25 Feet x 30 Inch Width complete all as specified and directed by Engineer-in-Charge

.-ditto- all as per ser item No 3 but of size 20 Feet x 30 Inch Width

.-ditto- all as per ser item No 3 but of size 12 Feet x 30 Inch Width

Note for Ser item No 3 to 5 : All conveyor body sheet 3mm mild steel. Stand C channel 4 x 2. Belt make Cariyar, PVC Two ply 5 mm thick conveyor Roller. Adjustable slide 6 Inch. Dia 5 mild steel with shaft EN8 metal with bearing. SKF (Wachi Japan). Main Drive Roller 5 Inch Dia maild steel with shaft EN8 metal with Paplal Tire Bearing SKF Make Nachi. Guide Roller. Conveyor suitable quantity Belt Support Roller. Motor make Hindustan 1440 RPM with suitable gear Box 40:1 Ratio. Finished with spray paint (Powder coating). Roller Finish Zinc plated.

S&F Crushing Machine 1 : Crushing Machine 7.5 HP 1440 RPM Motor Make HMM modelwith gear box type Crushan. Body Size 15” x 18” x 12”. height with top hopper 2 mm thick CRC mild steel sheet shaft 55mm. round EN8 metal with Crushing Blade 6”. Dia x 12mm. thick BSW. high speed metal with hitting hardness. Finish material coffect hopper. 1-6 thick CRC Sheet With tray. All Fabricated material finished with powder coating shaft zinc plating complete all as specified and directed.

S&F Crushing Machine 2 : Crushing machine. Crushing machine 10 HP 1440 RPM. motan, make HMM with gearbox Crushan. Body Size 15 Inch x 24 Inch X 12 Inch hight with top Hopper. 2mm thick CRC mild steel sheet shaft 55mm, Round. EN8 metal, with Crushing Blade. 6 inch dia x 12mm, thik BSW. high speed metal with hitting handness, Finish material collect Hoppar 1-6 thik CRC sheet with tray all Fabricated material finished with Powder Coating - shaft zink Plating complete all as specified and directed by Engineer-in-Charge.

S&F Crushing Machine 3 : Crushing machine. Crushing machine 15 HP 1440 RPM. motan, make HMM with Crushan. Body Size 15 Inch x 24 Inch X 12 Inch hight with Top Hopper. 2mm Thik CRC mild steel sheet shaft 55mm, Round. EN8 metal, with Crushing Blade. 6 inch dia x 12mm, thik BSW. High speed metal with hitting handness Finish material collect Hoppar 1-6 thik CRC sheet with tray all Fabricated material finished with Powder Coating-shaft Zink Plating complete all as specified and directed by Engineer-in-Charge.

S&F Hydraulic Bailing machine to bail out the collected plastic to minimize the volume of the said materials & comprises 400 x 400 chamber, Hydraulic power pack, 02 Hq, cylinders, 07.5 HP. Malline Body 3 feet width x 15 Inch Deep x 5 Feet height Heavy Duty, mild steel material 15mm (5/8), thick Plate with C Channel Support. Power Pack – 10 HP motor make Hindustan 1440 RPM with cylinder shaft 3 Inch. Dia EN8 metal with platform. Material press to ½ Inch Plate and solid metal. Power Pack Oil Tank 2.5 Feet x 2.5 Feet x 2 Feet. Finished with Powder Coating complete all as specified and directed by Engineer-in-Charge.

S&F Domestic Hazardous Waste Incinerator: 800 degrees heat generation, smoke less. The size of the furnace is (5 L x 5 W x 4 H)ft with inside chamber size (3.2 x 4.4 x 2) ft. The MOC of the structure is made by MS connected. Coming with ash out chamber in the chamber provide ash tray made with SS 304. • Door is made up of MS. Insulated with the ceramic wool • The furnace insulated with 3 layers first layer of high density ceramic wool second layer of cold insulation bricks third layer of high aluminium brick Alkali resistant. • The furnace operational temperature is 600- 800 degree Celsius. • The total load of furnace is divided into two group, heating elements are mounted vertically. • Electric element power consumption not more than 24kw/hr per element 3 kw/hr 8 nos of element inside the furnace divided into (4 Left & 4 Right ) in star connection. • Automatic power cut if any type of fault found by system • 1 Nos of control panel. • 70 kg/hr waste dispose. • Furnace painted with 2 coat of Asian anti rust primer and 3 coat of high quality aluminium paint. • 20 ft stack with 1 hp blower of 2800 rpm.

Note :- Schedule of Credit of Amount Rs. 0.00 shall be deducted from total amount.