Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹46.5 L+₹2.5 L (5.80%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹49.0 L+₹5.1 L (11.6%)Rejected-Finance M S WALIA TRADING CO VILLAGE VASUDEVPURA NALAGARH ROAD VILLAGE VASUDEVPURA PINJORE HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L3 | Rejected-Finance Other than lowest bid. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
COMPREHENSIVE MAINT TO MD ACCN UNDER AGE B/R-I OF GE (SOUTH) MAMUN
2022_MES_543688_1
GE(S)/M-14/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹90,000
Yes
20 Sept 2022
5 Aug 2022
9 Sept 2022
5 Aug 2022
2 Sept 2022
19 Aug 2022
Amount
M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, haunching, benching, kerbs , mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L RCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in slab supported on walls or in shelves and the like, including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note:- (Reinforcement cut as required to facilitate demolition).
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
M&L for brick masonry (EXCEPT BRICKS) straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter with block board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows and other frame/chowkhat of size 45mmx70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxicc additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwedwith full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (edge), minimum compressive strength of 58 N/Sqmm, modulus of elasticity 900N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with and including 6mmx150mm long SS dash fastners complete all as specified and directed.
S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows and other frame/chowkhat of size 50mmx100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxicc additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwedwith full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (edge), minimum compressive strength of 58 N/Sqmm, modulus of elasticity 900N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with and including 6mmx150mm long SS dash fastners complete all as specified and directed.
S&F factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows and other frame/chowkhat of size 50mmx125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxicc additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwedwith full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (edge), minimum compressive strength of 58 N/Sqmm, modulus of elasticity 900N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with and including 6mmx150mm long SS dash fastners complete all as specified and directed.
S&F 35mm thick Factory Made UV 3D printed flush door wood free consisting 5mm thick solid panel PVC sheet on both side (both side multicolour UV 3D printed) and consisting of frame made out of MS tube of 19mm guage thickness and size of 19mmx19mm for stiles as well as top , bottom and lock rail , the inside panel shall consist 18mm/19mm thick rigid solid PVC board having shutter density not less than 750Kg/Cum complete all as specified and directed.
S&F factory made conforming to IS2202(Part-I)-1999, 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
M&L 35 mm thick single piece factory made wire gauge door shutter of ( stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with 160mm wide locking rail and 200mm wide bottom rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011
S&F "as in repair" factory made 18mm (+0.7mm) thick PVC sheet one side prelam for cupboard shutter of density 600 Kg/Cbm bent 90 degree and finish at all edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape complete all as per manufacturers specifications
S&F 100mm long butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 100mm long stainless steel handle, bright finish complete all as specified and directed.
S&F 125mm long aluminium handle, cast type, anodised complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm width of flaps (when open), complete all as specified and directed.
S&F 125mm size hasp and staple, aluminium anodised safety type including bolts to hinge plate and fixed with screws complete all as specified and directed.
S&F magnet ball catcher for cupboard shutter, complete all as specified and directed.
S&F 200mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F 140mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber complete all as specified and directed.
S&F "as in repair" 20mm dia stainless steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type brackets, funnels etc suitable for single curtain rod, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.
M&L for 50mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth using extra cement including glass dividing strips as per site requirement complete all as specified and directed
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 60mm thick, M-35 grade coloured machine pressed precast rubber moulded concrete interlocking (Red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed.
M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, complete all as specified and directed.
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of washable distamper white or tinted including removal of nails etc complete all as specified and directed.
M&L for additional coat of washable distamper white or tinted complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distamper over a coat of chalk whitening primer, complete all as specified and directed.
M&L for preparation of new surfaces of wood work of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for 15mm bore steel water tubing 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connections, including cleaning and refixing in same or any other location with all new GI fittings, short pieces and fixed to walls, floors etc complete all as specified and directed.
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F wall mounted stainless steel kitchen plate rack (wt not less than 11kg as per sample approved by GE) made of stainless steel 1mm thick, fixed on wall with plugs, mild steel screws overall size 760mm x 760mm x 250mm complete all as specified and directed.
S&F sink with drainage board made of stainless steel 1mm thick, fixed with plugs, washers including PVC waste pipe, waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting to union pipe, overall size 915mm x 460mm, bowl size 400mm x 350mm x 180mm, complete all as specified & directed.
Fixing only "as in repair" sink with or without drainage board with plugs, washers including PVC waste pipe, waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe of any type, complete all as specified & directed.
S&F stainless steel peg set of six of size 460mm x 40mm x 3mm, fixed with machine screws and wooden and plastic cleats (minimum weight 190 gms), complete all as specified and directed.
S&F rubber lining fitted with aluminium powder coated strips, 100mm wide for door cill, complete all as specified and directed.
Demolition of (unreinforced) cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.
Resecuring or easing and adjusting existing wooden panelled/wire guage shutter exc 1.00 Sqm but n.exc. 2.00 Sqm each in same or other opening after repair complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm each, complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
M/S TARA CHAND CONSTRUCTION CO.
Walia trading co
Bidder Name
Walia trading co
Alishan Builders
M/S TARA CHAND CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .