Providing protective shade for compressor Hardon

Providing & fixing corrugated sheet GS /PPGI sheet 1.00 mm thick with zinc coating not less than 275 gm/m² closefitted serrated adjustable corrugated /semicorrugated sheets including overlaps, ridges if required including supplying and fixing necessary J or L hooks bolts, nuts as washer and bitumen washers with scaffolding etc. complete all as directed by the Engineer-in-Charge.

STRUCTURAL STEEL WORK for Shed: At all levels including supplying, cutting, fabricating, welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer and one coat of synthetic enamel , including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying autoclaved aerated cement blocks masonry with 230mmmm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.

Providing and laying 20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm