REPAIR MAINTENANCE OF ELECTRIC FANS EXHAUST FANS MCB DBS SUBMAIN WIRING ELECTRICAL FITTINGS AND OTHER ALLIED INTERNAL ELECTRICAL WORKS INSIDE HOSPITAL BUILDINGS UNDER AGE I ASVINI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and S&F modular sunken boxes with modular white cover plate with frame, suitable for mounting switches, sockets, fan regulators as required for one light point controlled by one switch. (Note-1. The cost of cutting chases in stone /brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring

All as per item No. 02 here-in-before but one fan point controlled by one switch.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 02 here-in-before but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories S&F modular sunken boxes with modular white cover plate with frame, suitable for mounting switches, sockets as required for one socket point 16 Amp controlled by one switch. (Note-1. The cost of cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring

M & L in replacement of point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Block colour), 1100 volts grade cable, FRLS, passing through PVC casing caping 25/32mm including accessories and S&F PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:-

One light point controlled by one way switch.

One fan point controlled by one way switch with fan regulator.

One 3 pin socket outlet, 5 Amps on the same board with other switches.

One 3 pin socket outlet, 5 Amps on the Independent board.

One bell/buzzer point controlled by one bell switch on the same board or independent board with other switches.

All as per item No 2.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 1 Amps on the independent board.

S & F in replacement of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed.

M & L in replacement of buzzer, ding dong, AC, 230V single pole complete all as specified and directed.

M & L in replacement of modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.

M & L in replacement of modular bell switch 6Amp, 1 module complete all as specified and directed.

S & F in replacement of modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed.

S & F in replacement of modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

M & L in replacement of modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.

S & F in replacement of modular stepped type fan regulator, 120Watts - 2 module complete all as specified and directed.

S & F in replacement of LED Surface track light fitting (bed lamp) Aluminium/PVC/Polycarbonate body complete all as specified and directed.

S & F in replacement of Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket 20 Amp, 240 Volts, including MCB SP upto 20 Amp current carring capacity complete with the connection testing and commissioning, complete with after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of MCB Single Pole Neutral sheet metal enclosure, single door DB 4 Way, 200 Amps rated bus bar for each phase, 240 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of MCB Single Pole Neutral sheet metal enclosure, double door DB 8 Way, 200 Amps rated bus bar for each phase, 240 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of MCB Single Pole Neutral sheet metal enclosure, double door DB 12 Way, 200 Amps rated bus bar for each phase, 240 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of MCB Triple Pole Neutral sheet metal enclosure, double door DB 4 Way (4+12) with 200 Amps rated bus bar for each phase, 415 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of MCB Triple Pole Neutral sheet metal enclosure, double door DB 8 Way (4+24) with 200 Amps rated bus bar for each phase, 415 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and as directed.

S & F in replacement of 415 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of TPN 40 to100 Amp current carring capacity in the DB complete with the connection testing and commisioning, complete all as specified and as directed.

S & F in replacement of 240 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of SP upto 32 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and as directed.

S & F in replacement of 240 Volts, 10 KA, "C" curve minature circuit breaker (MCB) of SPN 40 to 63 Amp current carring capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and as directed.

Taking down unserviceable FTL fittings and supply and fix in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and as directed.

Taking down unserviceable FTL fittings and supply and fix in replacement of LED lights fitting 1x 20W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and as directed.

Taking down unserviceable FTL/LED fittings and supply and fix in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and as directed.

Taking down unserviceable FTL/LED fittings and supply and fix in replacement of LED luminaire 300 mm x 300 mm, 18/20 watt, 220 V, AC, surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and as directed.

M&L in replacement of sub main wiring in surface/ recessed as site required with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 4.0 sqmm and incl drawn through PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfaces complete all as specified and as directed. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 4 sq mm copper conductor & one run of 4.0 sq mm copper conductor is measured as one unit.

M&L in replacement of sub main wiring in surface/ recessed as site required with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 6.0 sqmm and incl drawn through PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 6.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfaces complete all as specified and as directed. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit.

Taking down U/S Recess mounting FTL and S & F in replacement of SPAN is LED Recessed/Surface 1 x 4 Feet , 40Watts, Flat panel ceiling light with high performance, commercial grade solution suitable for hospitals and so much more, including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed. Make: - Crompton cat part no. LCTLRN-40-CDL(1X4) or Equivalent Phillips/Wipro.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 16 sqmm x 4 core laid in ducts, passing through pipes, fixed on walls complete including connecting properly by means of clamps, thimbles and taking out old u/s damaged cables.

All as per Item No-31.00 here in before but of size 25 sq mm x 4 core

All as per Item No-31.00 here in before but of size 35 sq mm x 4 core

All as per Item No-31.00 here in before but of size 50 sq mm x 3.5 core

All as per Item No-31.00 here in before but of size 70 sq mm x 3.5 core

M & L for painting all expose surface including blades of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after scrabing cleaning all old paint etc including writing MES No and MES in black paint at site complete all as directed by Engr-in-charge.

All as per Item No 36.00 above but exhaust fan of size 300/450mm and any Make.

All as per Item No 36.00 above but Pedestal/wall mounting/Air circulator fan fan of any size and Make

Taking down servicable/ unservicable ceiling fans for day to day maint from site and overhauling of ceiling fans any size and Make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, replacing the unserviceable spare parts complete with re-assembling and connecting copper conductor multi stranded 3 core wire of size 14/0.0076, and testing after re-fixing at site complete all as specified and as directed by Engr-in-Charge. Note:- (i) Rate of petty items like hanging clamp set, bottom & top canopy, split pin, bolt & nut, spindle, cover fix screw and blade fixing screw, down rod shall be included in the above quoted rate. (ii) The spare parts bush, ball bearing, condensor, fan blade set, bottom cover/top cover, stator, rotor shall be measured and paid separately under relevant item.

All as per Item No 39.00 above but exhaust fan of size 300/450mm and any Make.

All as per Item No 39.00 above but Pedestal/wall mounting/Air circulator fan of any size and Make.

Supply and fixing in replacement of bush suitable for Ceiling/Exhaust/Pedestal/wall mounting/Air circulator fan of any type & size complete all as specified and as directed.

Supply and fixing in replacement of ball bearing suitable for Ceiling/Exhaust/Pedestal/wall mounting/Air circulator fan of any type & size complete all as specified and as directed.

Supply and fixing in replacement bottom & top cover suitable for ceiling fan 1200mm any make complete all as specified and as directed.

Supply and fixing in replacement Ceiling fan blade of size 1200mm any make complete all as specified and as directed.

Supply and fixing in replacement ceiling fan stator assembly of size 1200mm any make with super enamelled copper wire of same grade/size/gauge, no of turns as per existing complete all as specified and as directed.

Supply and fixing in replacement ceiling fan rotor assembly of size 1200mm and any make complete all as specified and as directed.

Supply and fixing in replacement of capacitor 2.5 Mfd oil filled metalic body complete all as specified and as directed.

All as per Item No 48.00 above but cap 3.15 Mfd.

All as per Item No 48.00 above but 4 Mfd.

Supply and fixing in replacement of twin core flexible wire size 23/.0076 complete all as specified and as directed.

Supply and fixing in replacement Exhaust fan blade size 300/450mm and any make complete all as specified and as directed.

M&L for Re-winding the damaged burnt winding by taking out from ceiling fan stator assembly of 1200 mm sweep, cleaning the slot and, rewinding with super enamelled copper wire of same grade/size/gauge, no of turns as per existing and duly heating & varnishing including greasing/oiling and commissioning/ testing up to the entire satisfaction of Engr-in-Charge .

All as per Item No- 53.00 above but for exhaust fan of 300mm sweep.

All as per Item No- 53.00 above but for exhaust fan of 450 mm sweep.

All as per Item No- 53.00 above but for pedestal/wall mounting/air circulator fan 300/400/450mm sweep

Supply and fixing replacement of Plastic Ventilation fan 200mm sweep (8") white ,Energy saving fans ,230V AC ,50 HZ Completed.

Supply and fixing replacement of Exhaust fan, steel body AC single phase, 230volts, 50Hz of size 300mm sweep (12") with blades, frames and louvers including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed.

Supply and fixing replacement of Exhaust fan, Heavy duty, steel body AC single phase, 230volts, 50Hz of size 450mm sweep (18") with blades, frames and louvers including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed.

Taking down deteriorted louvers and supplying and fix new exhaust fan louvers fixed type of size 300/450mm made out of 1.6mm GI sheet with horizontal ventilation, machine pressed cutting for horizontal ventilation with flat iron base of complete all as specified and directed by E-i-C.

Cutting hole in existing concrete or brick wall suitable for fixing 300/450mm sweep exhaust fan making good the hole including proper internal plaster work and surface finish in side and outside the hole as per site requirement complete all as specified and directed by E-i-C.

Cutting/drilling in existing RCC ceiling slab surface suitable for fixing with stainless steel super heavy duty 'S' hook specially designed to hang ceiling fan safe load pull out load in 75 kgs and jurk/vibration load is 40 kgs, including proper internal and external plaster work and surface finish as per site requirement including taking down old hook complete all as specified and directed by E-i-C.

M&L for painting all external surface on Geyser 25/50 ltr capacity complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after scrabing cleaning all old paint etc including writing MES No and MES in black paint at site complete all as directed by Engr-in-charge.

S&F in replacement of heating element 1.5 KW of any type ( Triangular/Threaded/ Cup type) for geyser 25 ltr capacity complete all as directed at site (work will be executed at site where geysers installed).

S&F in replacement of indicating lamp round/flat type as per existing suitable for 25 ltr capacity geysers complete all as directed at site.

S&F in repair fusible plug for any size of geyser complete all as directed at site.

S&F for replacement of unserviceable thermostate cut-out adjustable for 40-80*C ISI marked suitable for 25 ltr capacity geysers complete all as directed at site.

S&F in replacement of safety/pressure release/non return valve brass (ISI marked) best quality size 15mm suitable for 25 ltr capacity geysers complete all as directed at site.

Opening of geysers 25 ltr capacity for examining inner shell of copper and repairing the same by brazing at the point of leakage and testing complete on completion (Rate includes the rate of taking down and refixing the geyser after repair)

S&F in replacement of flexible connection pipe heavy duty braided hose PVC Pipe 600mm Long,15mm Dia (suitable for Hot water) of superior quality as per existing pattern with brass union & washer fitted at both end suitable to 15mm GI pipe line complete.

S&F in replacement of Brass apparatus plate assembly for 25 ltr geysers complete all as directed at site.

S&F in replacement of rubber ring gasket suitable for apparatus plate assembly 25 ltr geysers complete all as directed at site.

S&F in replacement of flexible connection pipe heavy duty braided hose PVC Pipe 450mm Long,15mm Dia (suitable for Hot water) of superior quality as per existing pattern with brass union & washer fitted at both end suitable to 15mm GI pipe line complete.

Supply, Installation in replacement of LED Red obstruction aviation luminaries 10 Watts with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion with IP66, complete including base plate complete fitting connecting upto top of the buildings with & including two runs of 2.5 Sqmm PVC insulated, weather proof, multistranded copper conductor cable of 1100 Volts grade including testing complete all as specified & directed.

M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 connected to earthing test point all as specified or indicated including of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete all as specified and as directed.

All as per Item No-75.00 here in before but using galvanised iron strip 25 x 4mm as earthing lead.

M & L in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified.

All as per Item No-77.00 here in before but 25x4mm galvanised iron strip

S&F in repair MCCB four pole, 125 Amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs as required.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x4Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit including taking down the old existing all as specified and directed.

All as per item No. 80 above but 2x6 Sqmm + 1x6 Sqmm earth in 20 mm dia conduit.

All as per item No. 80 above but 2x10 Sqmm + 1x10 Sqmm earth in 25mm dia conduit.

S&F in repair rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 25mm dia.

Note: The work has to be carried out in G+6 storey building in both accessible and in accessible areas. Necessary arrangements for scaffolding and conveyance shall be arranged by the contractor

jkconstruction (BID ID -3475959)

A.B.CONSTRUCTION (BID ID -3475701)

AGRAWAL ASSOCIATES (BID ID -3479855)

Minal Engineers (BID ID -3475865)