Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹42.3 L+₹3.9 L (10.1%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹44.2 L+₹5.7 L (14.9%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹46.8 L+₹8.4 L (21.8%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Being other than lowest |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PROVN OF CERTAIN CAPITAL, REVENUE AND MINOR WORKS IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2022_MES_557082_1
GE/DE-59/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹87,000
Yes
10 Jan 2023
11 Oct 2022
16 Nov 2022
11 Oct 2022
14 Nov 2022
1 Nov 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, exc 1.5 m wide and exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.
M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc all as specified & directed.
M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc all as specified & directed.
M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified & directed.
M&L for RCC M-25 (20mm graded aggregate) as in chajjas etc all as specified & directed.
M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complet all as specified.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified
Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified.
M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays between floors and beams finished rough surfaces of concrete complete all as specified.
Formwork to chajjas, chullah hoods, similar items including edges all as specified.
M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified.
M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.
M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.
M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified.
M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and as directed.
M&L Colour Glazed ceramic tiles 300x450x7mm thick,(Double charge) in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and as directed.
M&L Non skid ceramic tiles (400x400x7mm thick) in floors set and jointed in neat cement slurry and painted with colour cement to match laid over and including Screed bed (or) bedding layer of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified and as directed.
M&L for Precast machine pressed cement concrete tiles, factory made, 250mm x 250mm x 20-25mm thick, pointed in cement mortar 1:3 in floors, laid over and incl 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.
M & L 75mm thick PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified.
S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as specified.
S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardantgrade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed.
S&F 125 mm long,aluminium,anodised, barrel tower bolts of extruded section all as discribed.
S&F 125mm size aluminium handles,cast type,anodised all as directed.
S&F 75mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 all as specified and as directed.
M&L rendering 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of roof etc finishing the surface even & smooth without using extra cement complete all as specified & directed.
M&L rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even complete all as specified & directed.
M&L Rendering 5mm thick cement plaster on concrete surfaces in CM 1:4 as on ceiling all as specified and as directed.
Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable inish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.
M&L for preparation of new /old decorated external wall surface and applying a layer of 2 mm thick wall care putty, again sand papering thus making surface smooth and applying two coat of wheather proofing exterior acrylic emulsion paint premium quality on wall surfaces complete all as specified.
M&L Preparation of new plastered surfaces of walls and applying two coats of Oil bound distember on walls including 1mm thick wall care putty on newly plastered walls complete all as specified and directed.
M&L Preparation of new plastered surfaces of ceiling and applying two coats of Oil bound distember including 1mm thick wall care putty on newly plastered surfaces complete all as specified and directed.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors (canceal) for 15 mm bore GI tubing complete all as specified and as directed.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified.
S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified.
M & L for plain glass pane 4mm thick fixed with glazing wire, oil putty in squares exc 0.5 Sqm in each panes complete all as specified and directed by Engr-in-Charge.
M&L for 12mm Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work etc complete all as specified and as directed.
S&F in CP Connection 15mm size with nuts of length 600mm complete all as specified and directed.
M&L 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed.
S&F Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws
S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.
Supply and laying, Sail-glazed stoneware 150mm dia pipes laid in trenches and jointed to a level on concrete bed complete all as specified.
M&L for cement concrete 1:4:8 type D2 (using 40mm graded agg) incl packing under and haunching against the sides for 150mm internal dia of pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm).
Supply only liquid water proofing compound.
Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150 mm dia pipes complete all as specified and directed.
S&F Precast plastic fibre reinforced concrete man hole covers" medium duty " of overall size 1000 mm x 500 mm x 75 to 80 mm factary made complete all as specified and directed .
S & F 100mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
S & F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
S&F 15 mm bore Angle valve cast copper alloy Chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed .
S&F vitreous chinaware white oval shape wash hand basin (WHB) size 550mm x 400mm complete, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable waste pipe and waste fitting complete all as specified and directed.
S&F Vitreous china wash down water closet pan wall hung WC, Make Jaquar Model No: FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360x545x365 full set or other equivelent make from list, including flushing cistern and fixed with brass screw complete all as specified and as directed.
S&F cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified .(Make- Jaquare Cat No- AAHS-1551 or equivalent make from the list.(Make: Jaquar/Hindware/Cera)
S&F health faucet chromium plated brass completed all as specified Make - Jaguar cat No-ALD573 or equivalent make from the list
S&F vitreous China squatting pan 'Orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete bedding, PVC (SWR)S/P Trap 125/110mm ,L/L PVC symphonic action type flushing cistern (10 ltrs)and connections complete all as specified and as directed by Engr-in-Charge.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.(Make: Jaquar/Hindware)
S F Vitreous china bowl type urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (Excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engr-n-Charge.
S&F CP wall mixture diverted 15 mm bore cast copper alloy Chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc complete all as specified and directed.
S&F Stainless steel grating 100mm dia of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.
Providing and injecting chemical emulsion choloropyriphos 20 EC for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfaceantitermite treatment,/Treating the soil under plinth protection incl drilling & plugging complete all as specified and directed by Engineer- In- charge.
Providing & injecting chemical emulsion choloropyriphos 20 EC for treating the soil along with external perimeter of building/along the perimeter at plinth level at the rate of 2.25 litre of emulsion per metre of the perimeter wall antitermite treatment along external wall below concrete apron using chemical emulsion @ 2.25 ltr per linear mtr incl drilling & plugging holes etc in apron (300mm Apart) complete all as specified and directed by Engineer- In- charge.
Filling under floor spreading, leveling in layers n.exc 25cm thick well ramming including watering complete all as specified and directed by Engr-in-Charge.
S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 or Fe 310-0 complete.
S&F 35mm thick factory made flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed..
Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed
S&F for stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
M & L framed work such as grills, grating ,Railing ,Gate,,etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 290-0 or E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L three coat of white lime wash including preparation of new surfaces as on walls complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as discribed.
S&F 100mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 all as specified and as directed.
S&F for 250mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.
S&F for Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.
M&L Cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in roof levelling complete all as specified and directed.
M&L Pre polished coloured Chequered cement concrete tiles 300mmx300mmx25mm thick, set jointed with coloured cement and pigment and pointed in neat cement slurry in floors, pavements etc incl 20 mm thick CM 1:6 complete all as specified and directed
M & L PVC bend 110mm bore any radius complete all as specified and directed by Engineer- In- charge.
M&L Kota stone slab 16-18 mm thick with uniform texture in floor with laid over and including 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L Kota stone slab with uniform texture of 16-18 mm thick in treader of steps, riser of steps, skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Enge-in-charge.
M/L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade of approved colour and design laid over with gray cement and pigment complet all as specified and directed by the Engg-in-charge
S&F in Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd, fixing brackets complete all as specified and directed.
M&L two coats of synthetic enamel over a coat of pink primer painting on new wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer.
M&L PCC 1:2:4 type B-1 using 20mm agg as in sub base of flooring 75mm thick complete all as specified and directed by Engr-in-Charge.
M/L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade of approved colour and design laid over with gray cement and pigment complet all as specified and directed by the Engg-in-charge
Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks in cm 1:6 stright or curved on plan exc 6m mean radius complete all as specified.
M&L for preparation of new plastered surface of walls and applying two coat of cement base paint on walls complete all as specified and directed.
M&L for Steel rolling shutters, with out ball bearing, with thickness of latcch 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or Manual type complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240
S&F Pre- painted galvatume aluminum SMP coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling existing water tanks of capacity exc 250 & not exceeding 500 ltrs lowering from its position and removal to store, complete all as specified and as directed.
Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling and joints fixed properly including taking up or down steel tubing and connections of any type cleaning for refixing and removal to store. (Note :- work to be carried out in S + 4 storries or other various location and rates are including for the same complete all as specified) complete all as specified & directed.
Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling including joints fixed properly including taking up or down steel tubing and connections pipe of any type cleaning for refixing and removal to store (Note :- work to be carried out in S + 8 storries or other various location and rates are including for the same complete all as specified)complete all as specified & directed.
Supply and fixing steel water tubing `medium grade’ galvanized 25 mm bore with all fittings and fixed complete to walls and ceiling including joints fixed with adhesive including taking up or down steel tubing and connections pipe of any type cleaning for refixing and removal to store (Note :- work to be carried out in S + 4 storries or other various location and rates are including for the same complete all as specified) complete all as specified & directed.
Supply and fixing steel water tubing `medium grade’ galvanized 50 mm bore with all fittings and fixed complete to walls and ceiling including joints fixed with adhesive including taking up or down steel tubing and connections pipe of any type cleaning for refixing and removal to store. (Note :- work to be carried out in S + 4 storries or other various location and rates are including for the same complete all as specified)complete all as specified & directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth complete.
S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore incl seat cover complete all as specified and directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.
S&F in repairs Fancy type Bib tap CP with crutch or butter fly handle, 15mm bore complete fixed to GI pipe complete all as specified and as directed.
S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs.
S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.
M&L for Vetrified ceramic tiles ultra charged ( dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified
All as item No. 116 above but on vertical surfaces such as skirting / dados laid over and including 10 mm thick CM 1:4 as in backing coat complete all as specified.
M&L for prepration of Old plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed by Engineer-in-Charge.
Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.
Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture design and patterns having moisture content less than 2%,humadity resistance of 99%,NRC 0.85(with 50mm thick glass wool) as per IS 8225 :1987,Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizantal level suspended on inter locking metalT-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised@120grams per sqm including both sides) comprising of main -T runners of size 24x32 mm of length 3000mm.cross-T of size 24x26mm of length 1200mm and secondary intermediate cross T of size 24x26 mm of length 600mm to form grid module of size 600x600mm,suspended from ceiling using galvanised mild steel items(galvanised@80 grams per sqm) i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, complete all as specified and as directed.
S & F for switch piano, flush type single pole, one way 15 Amp complete all as directed. Make Anchor/SSK/Kinjal.
S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed. Make Anchor/SSK/Kinjal.
S & F of Exhaust fan 300 mm sweep metal type, DB incuding self closing louver and making all electric connections completed complete all as specified and as directed. Make Havells/Bajaj/CG.
Material and labour for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, drawn in to PVC conduit with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected complete all as specified. Make Finolex/RR Kable/Havells (for cable) Finolex/Kalinga/Plaza (for PVC Conduit).
M&L cutting/openig of hole through out the wall as suitable for exhaust fan of size '300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making good the distributed surface and all as per site requirement.
M&L of sheet Bakelite (Hylam) 3mm thick of sheet size 5"x5" including cutting of sheet suitable for fixing of 15A switch and making connection complete all as specified. (Make: Hylam/Formica or equivalent)
M&L of MS Metal Flush Box of size 4"x4" duly embedded in wall in cement mortar 1:4 after chase cutting of wall tile or marble with cutter and matching/making good the existing surface, complete all as specified. Make Havells/Indoasian/Legrand.
Supply and Fix electric water heater, storage type steel tank with inner glass linear with fastners for hanging, heating element upto 2 KQ capacity 25 Ltr, 5 Star rated complete with all accessories such as safety valve, NRV etc. (Make Havells/Venus/Recold)
Supply and Fixing of braided stainless steel connection pipe 600mm long and CP Brass adopter 10mm dia with Geyser any type/make capacity complete all as specified and directed.
aggarwal engineers contractors
M/s Shubh Enterprises
Vipul Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .