GE/SP/TOKEN-40/2024-25

Amount

Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately

Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge

All as per item No 4 here-in-before but 150mm bore

All as per item No 4 here-in-before but 200mm bore

All as per item No 4 here-in-before but 250mm bore

M&L for Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

All as per item No 8 here-in-before but 100mm bore

All as per item No 8 here-in-before but 150mm bore

All as per item No 8 here-in-before but 200mm bore

All as per item No 8 here-in-before but 250mm bore

Supply and laying cast iron pipes of 100mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge .

All as per item No 13 here-in-before but 150mm bore

All as per item No 13 here-in-before but 200mm bore

All as per item No 13 here-in-before but 250mm bore

Supply and fixing and testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.NOTE: Excavation earth work in any type of soil/Rock and run lead joints tighten joints rubber gasket shall be measured and paid seperately.

All as per item No 17 here-in-before but 200 to 300mm bore

Supply and fixing in replacement of unserviceable sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 250mm bore pipe as in repairs and ISI marked complete all as specified and as directed.

All as per item No 19 here-in-before but 200mm bore

All as per item No 19 here-in-before but 150mm bore

All as per item No 19 here-in-before but 100mm bore

All as per item No 19 here-in-before but 80mm bore

Supply and fixing in replacement of unserviceable jointing to cast iron pipe of size 250mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge

All as per item No 24 here-in-before but 200mm bore

All as per item No 24 here-in-before but 150mm bore

All as per item No 24 here-in-before but 100mm bore

All as per item No 24 here-in-before but 80mm bore

Taking out existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge

All as per item No 29 here-in-before but size 50mm bore

All as per item No 29 here-in-before but size 32/40mm bore

All as per item No 29 here-in-before but size 25mm bore

All as per item No 29 here-in-before but size 20mm bore

All as per item No 29 here-in-before but size 15mm bore

Supply and fixing GI tubing medium grade 80mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 35 here-in-before but size 50mm dia bore

All as per item No 35 here-in-before but size 32/40mm dia bore

All as per item No 35 here-in-before but size 25mm dia bore

All as per item No 35 here-in-before but size 20mm dia bore

All as per item No 35 here-in-before but size 15mm dia bore

M&L Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge

All as per item No 41 here-in-before but size 80 to 100 mm dia bore

Supply and fixing in replacement gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge.

All as per item No 43 here-in-before but size 32 /40mm dia bore

All as per item No 43 here-in-before but size 25mm dia bore

All as per item No 43 here-in-before but size 20mm dia bore

All as per item No 43 here-in-before but size 15mm dia bore

Supply and fixing in replacement PVC bib cock 15mm dia complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement PVC PTMT float valve 20/25 mm dia complete with PVC ball and connecting rod complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement cast iron non return valve flanged end conforming to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge.

All as per item No 50 here-in-before but 100mm dia all as specified and as directed by Engineer-in-charge.

All as per item No 50 here-in-before but 150mm dia all as specified and as directed by Engineer-in-charge.

M&L Brick work in CM 1:4 with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, 100 mm thick for sub base including demolation of old PCC complete all as specified and directed.

M&L for PCC type B- 2, 1:2:4 (40mm graded aggregate) ,100 mm thick including demolation of old PCC complete all as specified and directed.

M&L for plastering work 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports including demolation of old plaster complete all as specified and directed.

Excavation overarea Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified and directed.

M & L for Making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc all as specified and as directed by Engineer-in-charge

M & L as in repair Design, development, supply commissioning & testing EHCC certified ground tubular effective chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anticorrosive long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr long copper rod as primary conductor and hollow pure Copper tube of dia 50mm x 3mtrs long as secondary conductor to install with suitable connection terminal coforming of IS 3043: 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 02 Bags / 60 Kgs minimum or sufficient quantities required as per site complete including FRP earthing pit clause suitable cover, complete, all as specified and as directed by Engineer-in Charge. Note:- Excavation for earthing in any surface hard/rock/soft soil for required length by using rock driller machine/other eqpt is inclusive in quoted rate and necessary earthing pit also inclusive in quoted rate.

M&L as in repair for earth continuity conductor of size 25X4 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge

M&L for Construction of brick masonary valve pit of size 100cmx100cmx100cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copying 15mm thick 1:2:4 using 12mm graded aggregate all as specified and as directed by Engineer-in-charge) for upto 250mm dia valve) complete all as specified and directed.

Dismantling & taking out open well submersible pump sets installed at underground water storage tank of pump house and booster pump sumps of capacity 12.5 to 15 HP after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items

M&L for transportation of open well centrifugal type submersible pump set of capacity 12.5 HP to 15 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling for 12.5 HP to 15 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 12.5 HP to 15 HP submersible pump complete all as specified and directed.

S&F in replacement of casing ring suitable for 12.5 HP to 15 HP complete all as specified and directed.

S&F in replacement of shaft sleevesof existing material for 12.5 HP to 15 HP complete all as specified and directed.

S&F in replacement of wear ring suitable for capacity 12.5 HP to 15 HP complete all as specified and directed.

S&F in replacement of mechanical seal suitable for12.5 HP to 15 HP complete all as specified and directed.

S&F in replacement of gaskets suitable for 12.5 HP to 15 HP complete all as specified and directed.

S&F in replacement of impeller for existing material suitable for12.5 HP to 15 HP complete all as specified and directed.

Supply only housing upper and lower for 12.5 HP to 15 HP complete all as specified and directed.

Supply only revolving disc for 12.5 HP to 15 HP complete all as specified and directed.

Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs /overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge. Note : - Spare parts replaced shall be paid seperately under relevant items

M&L for rewinding of pressure Pump set of capacity 0.5 Hp to 1.0 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP 1.0 HP complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Pressure gauge 0-10 Kg / SqCM complete all as specified and as directed by Engineer-in-charge.

S&F pressure control switch suitable for 0.5 HP pressure pump set complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal non return valve of size 15mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal non return valve of size 20mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal non return valve of size 25mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal non return valve of size 40mm bore complete all as specified and as directed by Engineer-in-charge.

S&F in replacement gun metal non return valve of size 50mm bore complete all as specified and as directed by Engineer-in-charge.

Dismantling & taking out defective parts of booster pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs and making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : - Minor Parts required to make pumpset serviceable also included in the unit quoted rate.

M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

S&F in replacement Running Capacitor 10.0 MFD complete all as specified and directed.

S&F in replacement Running Capacitor 25.0 MFD complete all as specified and directed.

S&F in replacement Running Capacitor 36.0 MFD complete all as specified and directed.

S&F in replacement Running Capacitor 50.0 MFD complete all as specified and directed.

S&F in replacement Running Capacitor 72.0 MFD complete all as specified and directed.

S&F in replacement Running Capacitor 125.0 MFD complete all as specified and directed.

Supply only of ball bearing for 0.5 HP to 1.5 HP complete all as specified and directed.

S&F In Replacement CI Impeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap) complete all as specified and directed.

Supply and fix in replacement Decrin dozing pump Model No 96NG Q 51 , 100 PSI 40 GPD complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement FRP TANK of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement Electric motor Single phase 50 HZ 1/8 HP assy Suitable to mount on decrin mixing tank along with agitator shaft and blade complete all as specified and as directed by Engineer-in-charge.

Supply in replacement connection pipe suitable for connecting to decrin dosing pump to Header( 2 Mtr long 8 mm internal dia) complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of circuit of speed of Dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of injector Nozzle of Decrin dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of Regulator Knob of dozing pump complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of power cord of dozing pump 2 mtr long plug top 5 AMP 240 volt AC complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement of PVC pipe 25mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 10 HP to 15 HP pump complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of DOL starter upto 5 HP with relay 13-22 Amp complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement electronic timer ET-100 240/415 complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement volt meter 0-500 volts 96 sqmm digital type complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC complete all as specified and as directed by Engineer-in-charge.

S&F in repair CT 30/5 to 200/5 complete all as specified and as directed by Engineer-in-charge.

S&F in repair indicating light with bulb set of three complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC sheathed copper cable of size 2.5 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC sheathed copper cable of size 4.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC sheathed copper cable of size 6.0 sqmm 3 core,1100 volt grade.complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC PVC sheathed copper cable of size 10.0 sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.

S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and as directed by Engineer-in-charge.

Disconnecting & dismantling of pump set from the foundation breaking the existing defective PCC foundation in any size, shape with PCC 1:2:4 type B-2 (using 12.5 mm graded stone aggregate) for foundation of any size of motor pump set from any type capacity pump set and fitting pumping set in position with base frame painted with synthetic enamel black paint complete all as specified and as directed by Engineer-in-charge

Supply & fix MCB TP 415 volt AC of capacity 63 amps complete all as specified and as directed by Engineer-in-charge.

Supply & fix MCB SPN of capacity 32 amps complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 100 amps 4/3 pole 16 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 125 amps 4/3 pole 16 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 63 amps 4/3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110 /ML-4 complete all as specified and directed.

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45 /ML-3 complete all as specified and directed.

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32/ML-2 complete all as specified and directed.

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18 / ML-1.5 complete all as specified and directed.

Material and labour for scrubbing out the rust deposited on the surface of water header of inside sabji mandi MAP pump house including all connecterd inlet and outlet pipes and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint complete all as specified and directed .

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number complete all as specified and directed.

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 10- 15 HP 3 phase 415 volts over load relay range 45-65 amps complete all as specified and directed.

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 3-7.5 HP 3 phase 415 volts over load relay range 20-45 amps complete all as specified and directed.

Supply and fix in replacement Motor Guard( weather protection cover) made out of 24 gauge GI Sheet suitable for 1 to 3 HP centrifugal mono block / Booster pump set with lifting handle and provision of suction /dicharge pipeline Holes complete all as directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified and directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 LTRS complete all as specified and directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified and directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 500 LTRS complete all as specified and directed.

S&F as in repairs mild steel work in framed work such as ladder for OHT/UG sump with angle iron,channel,flat iron,square bar , Motor pumpset base etc. welding,drilling,cutting and similar work confirming to Fe-290 Gde E-165 and incl painting to surfaces using two coats of metallic primer and a coat of red oxide paint of desired colour complete all as specified and directed.

Supply & fixing in replacement of pressure booster pump 1 HP capacity single phase ,50 Hz mounted on roof for boosting water supply to high pressure and connected with existing water supply pipe line including necessary electrical wire and plug top,NRV socket complete all as specified and directed by Engr-in-charge.

Supply & fix as in repair Electronic overload relay (Manual reset) relay range 9-15 amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .

Supply & fix as in repair Electronic overload relay (Manual reset) relay range 24-40 amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .

Supply & fix as in repair Electronic overload relay (Manual reset) relay range 45-75amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .

Supply & fix as in repair Electronic overload relay (Manual reset) relay range 66-110 amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .

S&F in replacement pressure gauge analong type 4" dia 0-14 Kg rating complete all as specified and as directed by Engineer-in-Charge.

Supply & fix as in replacement of monoblock pump single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix as in replacement of Submersible pump horizontal single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix as in replacement of monoblock pump single phase 1 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply and fixing in replacement of cast iron butterfly valve size 50 mm dia complete all as specified and directed.

Supply and fixing in replacement of cast iron butterfly valve size 25 mm dia complete all as specified and directed.

Supply and fixing in replacement of cast iron butterfly valve size 20 mm dia complete all as specified and directed.

Supply and fixing in replacement of cast iron butterfly valve size 15 mm dia complete all as specified and directed.

M&L Dismantling of unserviceable monoblock / Centifugal pump set, with motor for 60 HP to 75 HP, strip opening and taking out or rotor carefully, cleaning of rotor and stator, checking the rotor bearings, pump bearings, gaskets, impeller keys, terminal plate, gun metal bushes, cooling fan blades, windings etc., re-assembling the motor including replacement of studs with nuts, retesting of motor winding and motor for full RPM and full discharge water after coupling with pump set complete all as specified and directed. NOTE- (i). The unit rate quoted by the contractor shall also include the cost of removing the motor and pump set to perform the works mentioned in this item. (ii) Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only.

Supply only shaft of existing material suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only impeller of existing material suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only shaft sleeve of existing material suitable for 60 HP to 75 HP complete all as specified and directed.

Drive end Bearing suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only Cast iron bearing housing for 60 HP to 75 HP complete all as specified and directed.

Supply only Gland assembly suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only throat bush suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only mechanical seal suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only rotor body suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only shaft coupling suitable for 60 HP to 75 HP pump set complete all as specified and directed.

Supply only ball bearing suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only roller ball bearing suitable for 60 HP to 75 HP complete all as specified and directed.

Supply only cooling fan for 60 HP to 75 HP induction motor complete all as specified and directed.

M & L for centrifugal type induction motor of capacity 60 HP to 75 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring including refixing in its original position and testing ( other spares required for motor will be measuerd and paid under relevant item ) complete all as specified and as directed by Engineer-in-charge.

Taking out existing GI pipe 100mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge

Supply and fixing GI tubing medium grade 100mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.

Taking out existing MS pipe of size 80mm dia from suction/trenches / walls / roof / floor etc complete all as specified and as directed by Engineer-in-charge

All as per item No 173.00 here-in-before but size 100 mm bore

All as per item No 173.00 here-in-before but size 150 mm bore

Supplying, laying, jointing, welding & testing MS Pipe of size 80mm dia bore (Heavy duty class 'C'), suitable for welded joints and flanged joints as per site requirement including painting with two coats of anti corrosive paint ,laid in trenches/bore or laying on floors for connections to centrifugal pump sets for suction and to connected outgoing water main pipe line complete including welding works and taking down unserviceable complete all as specified and directed.

All as per item No 176.00 here-in-before but 100mm dia

All as per item No 176.00 here-in-before but 150mm dia

Supply and fixing and testing of MS Pipe bend of size 150mm dia bore (Heavy duty class 'C'), complete all as specified and as directed by engr in charge.

All as per item No 179.00 here-in-before but 100mm bore

All as per item No 179.00 here-in-before but 80mm bore

M & L for cutting MS pipe of any size and welding of flanged on both sides/single side of MS pipe as required on site for connecting the MS pipe/Valve/ Bend/Tee//NRV complete all as specified and directed. Note:- (i) The unit quoted rate included the rate of flanges, cutting,welding work nut,bolts and rubber packing required at site . (ii) MS pipe ,valve,Bend,Tee and NRV will be paid separately under relevant item of the schedule.

M&L dismantling of unserviceable monoblock / centrifugal pump set with motor of 2 to 5 HP, strip opening and taking out rotor carefully, cleaning of rotor and stator, checking the rotor bearings, pump bearings, gaskets, impeller keys, terminal plate, gun metal bushes, cooling fan blades, etc. complete, re-assembling the motor including replacement of studs with nuts, retesting of motor winding and motor for full RPM and full discharge water after coupling with pump set complete all as specified and directed. NOTE- (i). The unit rate quoted by the contractor shall also include the cost of removing the motor and pump set to perform the works mentioned in this item. (ii) Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only.

All as per item No 185 here-in-before but 7.5HP to 10 HP

M&L taking out burnt stater winding without damaging stator body of 2 HP to 5 HP motor, rewinding the electric motor with super enamelled copper conductor (wire) including providing mica paper etc in stator slots, PVC sleeves, varishing the winding complete all as specified and directed. NOTE:- The unit rate quoted shall also the cost of winding wire and taking to workshop and vise versa.

All as per item No 187 here-in-before but 7.5HP to 10 HP

Supply only shaft of existing material suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only impeller of existing material suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only shaft sleeve of existing material suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only Cast iron bearing housing for 2 to 5 HP motor complete all as specified and directed.

Supply only Gland assembly suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only throat bush suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only mechanical seal suitable for 2 to 5 HP motor complete all as specified and directed.

Supply only rotor body suitable for 2 to 5 HP motor complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 2 to 5 HP motor pump set complete all as specified and directed.

Supply only ball bearing for 2 to 5 HP motor as per existing complete all as specified and directed by Engineer-in-Charge.

S&F cooling fan for 2 to 5 HP motor induction motor of any make and type. complete all as specified and directed.

Supply only shaft of existing material suitable for 7.5 to 10 HP motor complete all as specified and directed.

Supply only impeller of existing material suitable for 7.5 to 10 HP motor complete all as specified and directed.

Supply only shaft sleeve of existing material suitable for 7.5 to 10 HP complete all as specified and directed.

Supply only Cast iron bearing housing for 7.5 to 10 HP motor complete all as specified and directed.

Supply only Gland assembly suitable for 7.5 to 10 HP motor complete all as specified and directed.

Supply only throat bush suitable for 7.5 to 10 HP motor complete all as specified and directed.

Supply only mechanical seal suitable for 7.5 to 10 HP motor complete all as specified and directed.

Supply only rotor body suitable for 7.5 to 10 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 7.5 to 10 HP pump set complete all as specified and directed.

Supply only ball bearing for 7.5 HP to 10 HP as per existing complete all as specified and directed by Engineer-in-Charge.

Supply only cooling fan for 7.5 to 10 HP induction motor complete all as specified and directed.

M&L for Cleaning of under ground / semi under ground water storage sump of capacity 50000 gallons by tank clean process which is folowing :- (a) Mechanised removal of all remaining dirty water by high capacity submersible pump set (b) Removal of sludge by vacuum operated German pump (c) Cleaning of walls, ceiling and bottom of tank by German made high pressure rotary jet 120 bars pressure (d) Removal of all dirty particle by industrial wet vacuum cleaner leaving the tank 99.9% physically cleaned (e) Sterlization of tank by Eco-Friendly biodegradable and highly effective against all pathogens (f) Sterlization of tank atmosphere by industrial UV radiator leaving the tank complete sterlite by Spealized Method.

All as per item No 211 here-in-before but RCC overhead tank of Capacity 5000 gallons Note for item No.211 & 212 :- All the sluge materials / fungs removed from the underground sump / semi underground sump and over head tanks will be removed from the site to a distance not exceeding 50 mtr and all underground sump / semi underground sump and overhead tanks will be cleaned in all respect upto 3 mtr around the water tanks. The cost of the same shall be deemed included in the respective items. All T&P required for the cleaning of tanks / sumps will be arranged by the contractor.

Supply and fix as in replacement Board made out fine quality PVC sheet duly framed with PVC Moulding and provided with hanging arrangement,for writing the details of the pumpset installed, the details of pumpset will be provided by Engr-in- Charge all as specified and directed The Board size shall be 2 Mtrx 1 Mtr complete all as specified and directed by Engineer-in-charge .

Supply, Installation, testing and Commissioning in replacement of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS-304, Stem Material SS-431, Seat EPDW, hand wheel for manual operation and having 05 nos, limit switches for Open/ Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation earth work, electrical and data cable connection upto required and PCC all as specified and directeted by Engr-in-Charge( Butterfly valve shall be have following specification):- Input Voltage: 230V, AC. Designed line pressure : 16 Kg/Sq cm. In built CPU: Quad core 64 bit ARM Cortex A53 clocked at 1.2GHz. Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD Port for loading your operating system and storing data. In built wireless LAN and Bluetooth low Energy. The mounting shall be direct type using specialized arrangement of GI Pipe of suitable size/ thickness, complete all as specified and directed.

Supply, Installing,Testing and Commissioning as in repalcement of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of level with following specification:- Range : 0-8 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC

M&L for Repair of servo voltage stablizer of capacity 150 KVA , 3 Phase 50 Hz with complete wiring and testing with OV,UV protection with reverse phase and overload and replacement of controller , sevo motor, gear set ,RC ,micro switch complete all as specified and directed..(Note : Spare parts will be measured and paid separately under relevant items of schedule)

M & L for Rewinding of dimmer set with copper wire as per actual gauge of servo voltage stablizer of capacity 150 KVA , 3 Phase 50 Hz with complete all as specified and directed

supply only micro processor controller for 150 KVA sevo stablizer complete all as specified and directed.

Supply only servo motor suitable for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply only RC for 150 KVA servo volatge stablizer complete all as specified and directed.

Supply only micro switch for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply only Gear set for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply only motorised plate for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply only Carbon brush for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply only Armour set for 150 KVA servo voltage stablizer complete all as specified and directed.

Supply and filling oil for servo voltage stablizer of superior quality complete all as specified and directed. Note :(i) Contractor shall bring the oil in sealed container and after use of oil, container shall be property of contractor and nothing extra shall be admissible on this account.

Supply and fixing as in replacement LED lights fitting 1x 20 W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for attending of water supply complaints for any leakage/blockage in GI pipe lines of size 20mm/25mm bore taking up serviceable/unserviceable GI water pipe lines all fittings/fixtures from trench including supply and laying GI tubing 20mm/25mm bore up to 1 mtr length (max) including necesssary cutting, threading and replacement of unserviceable GI fittings such as GI socket /Nipple/union socket / Tee /reducer etc. of size 20mm/25mm including necessary excavation and earth work up to 1 mtr length to repair the leakage / clearing the blockage in the pipe line and testing on completion on ground/wall/floor/roof of the bldg complete all as specified and direted Note:- GI fittings ,upto 1 mtr length pipe,excavation,returning filling and removal required at site also included in the unit quoted rate .

All as per item No 228 here-in before but of size 40mm /50mm bore GI pipe line

All as per item No 228 here-in before but of size 80mm /100mm bore GI pipe line

M&L for Cleaning of service tanks of apacity upto 1000 Ltrs installed at various places by emptying the tanks, removing scale, dirt and all other foreign materials deposited inside nipples, on side of walls and bottom of the tanks by scrapping and brushing with wire brush , and pressure pump, cleaning with bleaching powder slurry and allowed to dry and then washing the tank with fresh water, Checking and removing Airlock if any on next day after cleaning of the tank, cleaning of vegetation, etc, on surrounding RCC slab where the tank is resting complete all as specified and directed

All as per item No 231 here in before but Service Tanks of capacity exc 1100 Ltrs and not exc 2000 Ltrs

All as per item No 231 here in before but Service Tanks of capacity exc 2500 Ltrs and not exc 5000 Ltrs

Supply and fixing in repair Bib cock without flange (foam flow) , cast copper alloy fancy type,screwed for iron pipe or for union , suitable for 15 mm bore pipe , complete all as specified and directed.

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge.

M & L for point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets with 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and directed.

S&F socket outlet 2 in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

S&F switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of fire hydrant valve single headed of size 63mm bore complete all as specified and directed.

S&F in replacement of RRL hose pipe 15m long complete all as specified and directed.

S&F in replacement of RRL hose pipe 30m long complete all as specified and directed.

M& L for Repairs to fire hose cabinet including replacement of unserviceable broken glass, hinges,aluminium tower bolts door steples locks wooden pieces hold fastners connecting work including cement work as required at site complete all as specified and as directed by Engineer-in-charge

Supply, Installing,Testing and Commissioning in replacement of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of level with following specification:- Range : 0-3 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC

Supply, Installation, Testing, Commissioning and Programming of Metal Reflector Parabolic antenna with control station to generate strong directional effect with WLAN network support having mast mounting arrangment. Control station should operate on license free frequency with necessary hardware at a suitable location to be connected to the central scada server so as to establish connectivity with every station of the network after conducting a frequency survey of the entire area of interest and identify suitable locations to mount the station hardware and the height of the antennas to establish clear line of sight either directly or by multi hop so as to be able to send data. Antenna type:- Metal Reflector Antenna Degree of protection:- IP65 Mounting type:- Mast mounting The should have a approval of Wi-Fi compliance, Environmentally Friendly Use Period :- UNLIMITED = EFUP-e Note:-Rate quoted is deemed to be included for making arrangemets of accessories such as mounting bracket and mast clips

Supply, Installation, testing and Commissioning in replacemnt of Pole structure for installation and protection of RF Antennas having galvanised iron light grade pipe ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc mounted on metal plate grouted in earth or on the roof top. The pole should be tied with steel wire rope from both the sides. The minimum height of the structure should be not less than 12 meter. The structure should be self supportive type with proper earthing. The GI pipe size for the structure should be as follows: - 0 - 6 meter - 2 inch 6 - 12 meter - 1.5 inch complete all as specified and directed.

Supply, Installation, Testing and Commissioning in replacement of 4 pair CAT 6 UTP shielded cable for communication complete all as specified and directed.

S& F in replacement 6 Core 1.5 sq. mm PVC sheathed PVC insulated copper armoured cable complete all as specified and directed.

S& F in replacement 4 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable complete all as specified and directed.

S& F in replacement 2 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable complete all as specified and directed.

AMIT ENTERPRISES (BID ID -3280387)

J.P. Enterprises (BID ID -3279770)

OM ASSOCIATES (BID ID -3280449)

M/S Anand Enterprises (BID ID -3280516)

shakti construction (BID ID -3284179)