8120/SAR-46/E8 REPAIR / REPLACEMENT OF CI/DI AND GI PIPELINES, FIRE FIGHTING INSTALLATION AND CHLORONOME ETC AT AF STN SARSAWA

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in width and getting out in soft/loose soil complete all as specified and as directed

All as per item No. 1 above but in hard/dense soil complete all as specified and as directed

Returning, filling soil including spreading, leveling and watering and well ramming in layers not exceeding 25 cm thick to achieve desired compactness complete all as specified and as directed.

Removing of excavated material/soil to a distance not exceeding 50 Mtrs and depositing at a layer not exceeding 1.5 Mtr above the starting point complete all as directed

M&L for PCC 1:3:6 type C-1 ( using 20 mm graded stone aggregates) for repairing of valve chamber foundation etc including filling in road cutting and hard standing etc complete all as specified and as directed

Supply, laying, jointing and testing in trenches,80 mm bore galvanized iron water tubing medium grade including provision of all necessary ISI marked GI fittings / accessories including taking out old existing pipe complete all as specified and directed

All as per item No 6.00 above but 50 mm bore .

All as per item No 6.00 above but 40 mm bore

All as per item No 6.00 above but 25 mm bore.

All as per item No 6.00 above but 20 mm bore.

All as per item No 6.00 above but 15 mm bore.

Supply, laying, jointing and testing in trenches cast iron pipes 200 mm borewith spigot and socketed ends centrifugally cast (spun cast) class LA suitable for run lead jointsincluding taking out old existing pipe run leads joints complete all as specified and directed. Note:- Earth work, CI specials/ fittings run lead joints of the pipes shall be measured and paid for separately under appropriate item.

All as per item No 12.00 above but 150 mm bore.

All as per item No 12.00 above but 100 mm bore .

All as per item No 12.00 above but 80 mm bore

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for50 mm bore iron pipe complete all as specified and directed

All as per item No 16.00 above but 40 mm bore.

All as per item No 16.00 above but 25 mm bore .

All as per item No 16.00 above but 20 mm bore .

All as per item No 16.00 above but 15 mm bore.

Supply, fixing, jointing and testing in replacement of ISI Marked, of approved quality, bronze ball/stop valve with handle, both ends screwed for 50 mm bore iron pipe complete all as specified and directed

All as per item No 21.00 above but 40 mm bore.

All as per item No 21.00 above but 25 mm bore .

All as per item No 21.00 above but 20 mm bore .

All as per item No 21.00 above but 15 mm bore .

Supply, installation, fixing, jointing and testing in replacement ISI Marked, of approved quality, cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,200 mm bore complete all as specified and directed

All as per item No 26.00 above but 150 mm bore.

All as per item No 26.00 above but 100 mm bore.

All as per item No 26.00 above but 80 mm bore .

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed for 100 mm bore sizes.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, 150 mm bore both ends flanged jointed and tested complete all as specified and directed for 150 mm bore sizes.

Supply and fixing in replacement ISI Marked, of approved quality, cast iron non return valve, 200 mm bore both ends flanged jointed and tested complete all as specified and directed for 200 mm bore sizes.

M&L for Cutting of the existing CI pipe line 200 mm bore for rectifying leakage or reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as specified and directed

All as per item No 33.00 above but 150 mm bore.

All as per item No 33.00 above but 100 mm bore.

M&L for rubber gasket joints in flanged end cast iron pipes and fittings 200 mm bore complete with welding grinding work and including minimum 3mm thick rubber/fibre gasket and replacement of nuts/bolts/washers complete including dewatering etc all as specified and directed

All as per item No 36.00 above but 150 mm bore.

All as per item No 36.00 above but 100 mm bore.

M & L forrun lead joint for 200 mm bore cast iron pipe with new pig lead complete all as specifired and directed.

All as per item No 39.00 above but 150 mm bore.

All as per item No 39.00 above but 100 mm bore .

All as per item No 39.00 above but 80 mm bore .

S&F cast iron fittings for presure pipes such as bends any type tapes, tee piece, union, dead plug, elbow, tee, socket, nipple of any type of required size complete all as directed.

S&F in repairs, ball valves high pressureof brass body with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed

All as per item No 44.00 above but 20 mm bore .

All as per item No 44.00 above but 25 mm bore .

S&F in repairs, GI column pipe medium grade 100 mm bore flanged/screwed medium grade GI pipes with flanged ends, 3 mtr in length laid in trenches / fixed over ground in suction / delivery line including disconnecting the old pipe of size 100mm from any location i.e. water supply / sewage complete all as specified and as directed

S&F in repairs, G I column pipe medium grade 40 mm bore flanged/screwed medium grade GI pipes with flanged ends, 3 mtr in length laid in trenches / fixed over ground in suction / delivery line including disconnecting the old pipe of size 40mm from any location i.e. water supply / sewage complete all as specified and as directed

S&F in repairs, GI column pipe medium grade 32 mm bore flanged/screwed medium grade GI pipes with flanged ends, 3 mtr in length laid in trenches / fixed over ground in suction / delivery line including disconnecting the old pipe of size 32mm from any location i.e. water supply / sewage complete all as specified and as directed

S&F in replacement of hard plastic pvc lowering pipe heavy duty of size 32mm dia complete with safety wire all as specified and as directed.

M&L for MCCB 125 Amp 4 pole 415 V, 50 Hzs, 25 KA including taking out old U/S one, complete all as specified and as directed.

M&L for Power Contractor 3 pole 3 phase Standard coil voltage 240/415 V, 50 HZ, Auxiliary contacts 2 NO+ 2 NC, Current rating 50 Amps, MNX-A1 complete all as specified and as directed

M&L for single phase preventer model VSP 2, suitable to be fixed with FASD starter of any capacity for operation of the submerSI-ble pump motor, including taking out old U/S one complete all as specified and as directed

S&F flexible copper conductor multi strand heavy duty single core of size 4.0 sqmm complete all as specified and as directed

S&F Electronic timer type :- ST 100 operating voltage 240/415 Volts, 50 Hz, time delay range 12-120 Sec/ 3-30 Sec suitable o be fixed with FASD starter of any capacity for operation of the submersible pump motor, including taking out old U/S one complete all as specified and as directed

S&F Digital Volt Meter (0-500V), including taking out old U/S one complete all as specified and as directed

S&F Digital Amp Meter (0-60A)/ (0-100A)/(0-200A), including taking out old U/S one, complete all as specified and as directed

S&F LED Indicating Light 240 VAC , 50 Hz, colour RYB -01 Set of three dia 22.5 mm including taking out old U/S one, complete all as specified and as directed

S&F in replacement fixing of push button start / stop for submersible pump starter panel complete all as specified and as directed

S&F in replacement fixing of capacitor of capacity 72 mfd to 120 mfd complete all as specified and as directed

S&F in replacement of MCB SP B series 6-32 Amps for submersible starter complete all as specified and as directed

S&F in replacement of contactor single phase of capacity 16 Amps for submersible starter panel complete all as specified and as directed

S&F in replacement of submersible starter panel for 1.0 Hp to 2.0 Hp pump set single phase 50Hz complete all as specified and as directed

S&F in replacement of submersible three phase DOL starter panel for 3.0 Hp to 7.5 Hp pump set single phase 50Hz complete all as specified and as directed

Supply and fixing in replacement of old flat plate solar collectors toughned GLASS as per matching existing type , including all fixing accessories omplete all as specified and as directed

Supply and fixing in replacement of old flat plate solar collectors frame BOX, including all fixing accessories complete all as specified and as directed.

Supply and fixing in replacement of old flat plate solar collectors copper absorber, including all fixing accessories complete all as specified and as directed.

Supply and fixing in replacement of flat plate solar collectors of size as per matching to existing size Complete puff insulated collector accessories complete all as specified and as directed.

S&F installation, testing new SS 304 tank 300 to 1000 ltr 3 mm thick capacity heat exchanger type duly 100mm thick glass wool insulated covered by cladding of aluminium sheet 24 SWG including connecting all GI connections to the new SS tank with collector panels and MS stand of suitable thickness including heat exchanger water pot mounted including provision for heating element of upto 3KW incase of clowdy weather including taking out old U/S one complete all as specified and as directed

M&L for disconnecting the chock heat collector panel from system & from each other and disconnecting it self taking out the collector tank from it frame, rectiffying of any leakage in tank, cutting main tube and welding.brazing the same after necessary disconnecting. Taking back the cooper tube collector to its frame and reconnecting the panel after cleaning to each other including replacing all necessary flanges of brass, nuts bolts, packing, insulation etc complete all as specified and directed

S&F providing Glass wool insulation 100mm thick insulated covered by cladding of aluminium sheet 24 SWG on warm GI water line of any size complete all as specified & as directed

S&F replacement of heating element upto 3KW with thermostat including connecting with electrical connections, complete all as specified and as directed

M&L for descaling the heat collector panel (capacity 100 Ltr each) by descaling pump using commercial grade acid mixed with water in the ratio of 1:10 (acid : water) after opening / dismantling the heat collector panel from each other and re-fixing the same after complete cleaning including providing new nuts & bolts, gasket packing, worn out brass flange including brazing work , all other required hidden work for complete descaling complete all as specified and as directed

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 4 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 6 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed

Supply, connection and testing of submersible cable copper conductor 3 core 1100 Volt grade 10 sq mm nominal cross sectional area including disconnecting the old u/s cable complete all as specified and directed

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 32/40 mm etc and transporting the defective pump motor set to workshop, lowering the new / serviceable submersible pump motor set to the existing location including replacing the rubber packing/ nut bolts of the column pipes , pipes, valves etc of suitable size where ever required complete all as specified and as directed

Lifting / taking out the defective submersible pump motor set of any capacity and description / make, any depth from bore well by lifting tolls , chain pulley etc all as required carefully, by disconnecting / dismantling all electric connections, column pipes of size 100 mm etc and transporting the defective pump motor set to workshop, lowering the new / serviceable submersible pump motor set to the existing location including replacing the rubber packing/ nut bolts of the column pipes , pipes, valves etc of suitable size where ever required complete all as specified and as directed

M&L and T&P for rewinding of submersible motor 30/35 Hp complete all as specified and as directed

M&L and T&P for repair of submersible pump 30/35 Hp including seals, bush, bearings impellers etc complete all as specified and as directed

M&L and T&P for rewinding of submersible motor upto 03 Hp complete all as specified and as directed

M&L and T&P for repair of submersible pump upto 03 Hp including seals, bush, bearings impellers etc complete all as specified and as directed

Supply, fixing and testing of submersible electric driven pump only with operating head range -28-92 mtr, 14 stage LPM range 95-10, size 32X32mm suitable for 02 HP motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge.(Taking out and lowering of pump motor set will be measured and paid separately).

Supply, fixing and testing of submersible electric driven pump only with outer dia of pump not exceeding 150 mm having discharge capacity 5 lps at 90 Meter head (operating head range -113-74 mtr) LPM 2075 of size 200mm suitable for 30 HP motor or as per ground sample of same head complete all as specified and as directed by Engr-in-charge. (Taking out and lowering of pump will be measured and paid separately).

Supply, fixing, connecting electric connections and testing submersible motor only capacity 30/35 HP 3 phase 415 volts, 50 HZ with outer dia of motor not exceeding 150 mm suitable to be coupled with pump as mentioned in item No. 61 hereinbefore or as per ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

Supply, fixing, connecting electric connections and testing submersible motor only capacity 02 HP 1 phase 230 volts, 50 HZ with outer dia of motor suitable to be coupled with pump ground sample of complete all specified and as directed. (Taking out and lowering of pump will be measured and paid separately).

M&L for two coats painting to exposed complete Sewage treatment plant/pump house including CI/GI water pipe lines of header/suction/delivery of bore wells/ booster pumps any type/make/size including sluice valves, fittings and non return valves at water supply installations/steel gates as per specified colour code after cleaning and scraping out old paint including writing/marking complete all as specified and as directed

M&L for construction of brick masonry valve pit /chamber complete with 3mm thick MS sheet cover including angle iron frame dully painted with locking arrangement of size 900x900 (depth as required at site) (internal dimensions) and including necessary excavation & earth work in any type of soil complete all as specified and directed

S&F Motor protection automation phase sequence corrector panel suitable for upto 40 HP motor complete all as specified and directed

M&L dewatering, cleaning of reservoirs with high pressure jet complete all as directed as under for the following. (i) Dewatering the tank with portable submersible pump set with flow rate of 30,000 ltrs per hr. (ii) Removal of left over dirty water and sludge with special sludge removal pump set having capacity up to 1.7 lakh ltrs per hr. (iii) Cleaning of wall ceiling and floor by high pressure rotary water jet with the help of pressure pump. (iv) Removing of remaining sludge from the floor with the help of industrial vaccum cleaner. (v) Treatment of inside tank be exposing UV radiation kill the suspended or floating bacterial remaining in the tank (a) OH RCC reservoir upto 50000 gallons capacity with staging of tank more than 15 mtrs but less than 28 mtrs hight.

OH steel reservoirs of 20,000 gallons capacity complete all as specified and as directed

Cleaning of static water tank of dia 6.5 m and 5.0 m deep, pumping out the water, removing mud , ulgi silt, foreign particles, scraping of walls, bottom surfaces and washing with water and applying two coats of white wash complete all as directed

M&L and T&P for dewatering & Cleaning the sewage collection well 6.60 metre dia, by removing all sewage material, mud, silt, ulgi etc including dewatering cleaning upto the floor. scrapping the walls, roof from inside the well and transporting of material to a distance exceeding 4 KM not exceeding 5 KM outside the AF stn complex complete all as specified and as directed.

M&L for chemical treatment of swimming pool water using copper sulphate per kg as per directed

Supply only in replacement of Ph test meter complete all as specified and as directed

Collection of water samples from various bore wells/sumps all as per the standard instructions and guidelines of the Chief Water Analyst of Department of water and Sewage examinations from IIT Rookee, transporting the samples safely and getting the same tested for chemical and bactyeriological tests, with and without chlorination test from the same Institute and report submitted to this office complete all as specified and directed.

M&L for Lifting / Taking out the deffective Non Clogging Sewage Pump Submersible KRTU type and discription/ make any type from sewage sump by lifting Chain Pully etc all as required carefully by disconnecting / dismantling all electic connections, Column Pipe any size 80/100mm etc. and transporting the defectiv pump moter set to AGE E/M yard, lowring New Serviceable Pump Moter Set to the Existing Location including Replacing the Rubber Packing / Nuts Bolts of the Column Pipes , Valves etc of Suitable size complete all as specified and as directed

M&L and T&P for repair of non-clogging sewage submersible pump 15-20 Hp including rewinding, mechanical seals, bush, bearings impellers etc complete all as specified and as directed

M&L and T&P for repair of non-clogging sewage submersible pump 25-30 Hp including rewinding, mechanical seals, bush, bearings impellers etc complete all as specified and as directed

Supply, fixing and testing of non-clogging sewage submersible pump type KRTUK, - 100-260 /74 head 22.5m discharge 30 Cum /Hr, complete all as specified and as directed by Engineer-in-Charge. Make KSB model No. KRTU 100-260/74 /equivalent as specified in list of makes.

M&L and T&P for repair of fountain submersible/monoblock pump upto 02 Hp including rewinding, mechanical seals, bush, bearings impellers etc complete all as specified and as directed

Supply, fixing and testing of starter for non-clogging sewage submersible pump type KRTUK, - 100-260 /74 with protection from over heating, over voltage/current, low water level complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix in replacement of Agitator for mixing of hypo-chlorine powder granules, stainless steel mixing rod, 3 phase electric driven motor of capacity 0.5 HP, Gear box, stand for fixing of agitator system on PVC tank 100 Ltrs complete with 3 phase electrical connection including PVC enclosure with MCB 0-32Amps TP including replacement guarantee for 01 year complete all as specified and as directed

Supply & Fix in replacement of Chlorination dosing pump of capacity 0-6 LPH, 230V 50Hz complete with Foot valve, Non return valve, suction piping and Delivery piping complete with fixing accessories including replacement guarantee for 01 year.

Supply only calcium hypo chlorite having at least 60% to 70% available Chlorine in granuales disinfectant in sealed container of 45 Kg white plastic drum for water treatment as complete all as specified and as directed Note:- Contractor must be provided orginal manufacturing's test certificate with Hologram.

Supply only stand by water sewage pump etrena 1300-BW (1.75 HP), 50Hz, 220 Volt, protection class IP 68 delivery size 50mmdischarge range 60-270LPM incl 50 meter aluminium cable 4 Sqmm 2 core with starter and 10 Meter 50mm delivery pipe complete all as specified and as directed

M&L and T&P for Inspection of entire fire alarms system (02 Nos) of SRE Bldg (G+6) & Ops bldg (01 Floor) with 08 zone main control panel with connected detectors, Manual call point, Response indicator, Hooter and repeater panel complete and carry out any repair required for testing of complete fire alarm system on user requirement basis. Note :- (i) Any item required for making system serviceable shall be measured and paid separately under supply only items. (ii) For any minor defect after carrying-out complete inspection & repair of the systems contractor will provide mechanic to rectify the same defect within 48 Hours complete all as specified and as directed

M&L and T&P for Testing of Fire alarm system with testing of detectors, Manual Call Point, Response Indicator, repeater panel, Hooter and main control panel including testing of each and every loop/zone. The testing will be carried out in the presence of user, JE E/M, AGE E/M.

Supply only Multi (smoke/heat/optical) detector conventional type complete all as specified and as directed.

Supply only Manual call point conventional type complete all as specified and as directed.

Supply only Hooter conventional type complete all as specified and as directed

Supply only FRLS stranded copper conductor wire of size 1.5 sqmm single corecomplete all as specified and as directed

Supply only Repeater panel conventional type complete all as specified and as directed.

Supply only in replacement of Main conrol panel of capacity 08 Zone complete with standby system with battery complete all as specified and as directed Note for Sl Item No. 1 to 119:- 1. The contractor shall apoint a supervisor to take daily complaints from complaint cell. 2. The contractor shall provide plumber, starter mechanic, moror mechanic, pump mechanic, Fire fighting system mechanic and labours as and when required for rectification of complaints within the time frame provided by JE/Engineer-in-charge. 3. In case any complaint is not rectified within the time frame given by Engineer-in-charge penalty @ Rs 200 per hour upto 24 Hours delay and then @ Rs. 2000 per day shall be deducted from contractor's dues. 4. All stationary required for comlplaint management shall be provided by the contractor. If any extra item/spare required for fixing of all items mentioned in sch, that shall be arranged by the contractor at his owm cost.

VIJAY ENTERPRISES

NAQLI LAL SHARMA AND ARUN SHARMA