Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.5 L+₹9,436 (0.34%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.7 L+₹23,394.20 (0.85%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹29.9 L+₹2.4 L (8.90%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹30.0 L+₹2.5 L (9.23%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹33.4 L
EMD Value
₹66,800
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow 11 Sardar Patel Marg, Lucknow-226002
SPL REPAIR TO BLDG NO P 107 ORS MD ACCN (08 QTR) AT NVL UNDER GE (WEST) LUCKNOW
2022_MES_542569_2
GE/W/LKO/51 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹66,800
Yes
1 Dec 2022
12 Sept 2022
5 Oct 2022
12 Sept 2022
3 Oct 2022
26 Sept 2022
12 Sept 2022 - 19 Sept 2022
Amount
Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Dismantling stone slab and tiles of any description and thickness in floors , aprons etc laid bedding and pointed in any mortar complete all as specified directed
Demolition of cement concrete of any description not otherwise described for complete all as specified and directed
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for shelves, lintels etc complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding and backing coat and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed
Dismantling wall/ceiling/cupboards boards complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.
S & F in repair for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed
S & F in repair for GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and directed.
M & L for cutting chasing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed
M & L for 100 mm thick PCC type B-2, 1:2:4 (40mm graded stone aggregate) as in platform including finishing top even and smooth without using extra cement complete all as specified and directed.
M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 including demolition of brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed.
M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius including demolition of brick work complete all as specified and directed.
M & L for PCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast blocks, copings etc. with necessary form work complete all as specified and directed
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed.
M & L for Cutting holes exc half brick but not exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed
S & F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.
M & L for preparing surfaces of wood and wood based materials, any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.
S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels of commercial type on both side complete all as directed.
S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded all as specified under 8.24(a) of SSR Pt-I complete all as specified and directed.
S & F in repair kitchen cabinet & CB shutter in required sizes at site and wardrobe made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick pvc sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5 mm screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirement and as per make and specification mentioned as per drawing and all are specified and directed by Engineer-in-charge on site.
S & F in Anodised aluminium powder coated (minimum thickness of powder coating not less than 50 micron) frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etccomplete all as specified and directed.
S & F in Powder coated aluminium (minimum thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
S & F Powder coated aluminium (minimum thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.
S & F figured glass 4 mm thick, pin head type and glazing with oil putty in squares not exe 0.5 sqm in each pane.complete all as specified and directed
S & F Sheet glass 4mm thick ordinary quality and glazing with rubber beading etc in squares not exc 0.5 Sqm in each pane complete all as specified.and directed.
S & F 150 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.
S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and directed
S & F stainless steel Butt hinges "medium weight" steel 100mm size complete all as specified and directed
S & F alumunium handle fabricated type anodised 150mm long complete all as specified and directed
S & F aluminium alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.
S & F 100x50mm single rebated factory made, 100% solid WPC (Wood polymer Composite) paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/cum complete all as specified and directed. Note : (a) Door frame shall be water proof , termite proof , fire retardant and having excellllllant screw holding capacity. (b) Rate for this item includes Material and labour for fixing of frame with minimum 6 Nos of hold fasts/ Dash through bolt of suitable size as directed by Engineer-in -charge
S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as gven below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom / Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm
S & F in repair second class hard wood Plain fillets square, rectangular or triangular in section, Wrought finished, including necessary fitting area exc13sq.cm but n exc 25sq.cm complete all as specified and directed
S & F 19 mm thick BWR plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.
S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.
S & F 40 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform.complete all as specified and directed
S & F auto concealed hinges Stainless Steel of size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified
S & F 100mm size Stainless Steel handle fancy type complete all as specified and directed.
S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.
S & F 100mm size Stainless Steel hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
M & L for 10 mm thick rendering in CM (1:4 ) on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed.
M & L for 10 mm thick rendering in CM (1:4) on fair faces of brick or concrete surfaces of ceiling finished even and fair complete all as specified and directed.
M & L for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound as per manufacturer instructions finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.
M & L for 10 mm thick Cement plaster in CM 1:3 mixed with water proofing compound as per manufacterer instructions and surface finished even and smooth without using extra cement. complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.
M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight complete all as specified and directed.
Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.
M & L for coloured non skid ceramic floor tiles, shade as approved size (300 x 300mm) x 7-8mm thick over and including 15mm thick screed bed in CM 1:6 and pointed in white or colour cement to match complete all as specified and directed
M & L for glazed ceramic colour tiles of size (300 x 600 mm) x 7-8mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed
M & L for coloured vitrified tiles of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed
M & L for coloured vitrified tiles of size 600x600x8-10mm thick in vertical surfaces such as dado/skirting with and incl 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed or bedding layer 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.complete all as specified and directed
M & L for Machine cut kota stone slab 20-25mm thick in treads and riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:4 laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 15mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges where ever required complete all as specified and directed.
S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets and fixed with screw complete all as specified and as directed
S & F in repair fancy type CP mild steel curtain rod of 25mm dia including CP bracket/wall to wall including latto on each end complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and directed.
S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.
S & F in repair PVC (SWR) bends any radius 110mm size complete all as specified and directed.
S & F in repair PVC (SWR) bends any radius 75 mm size complete all as specified and directed.
S & F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
S&F in repair vitrious China squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap set and to flush pipes etc and lime concrete bedding complete all as specified and directed.
S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and directed
S & F in repair for CP bib taps quarter turn 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed Make : Essco Jaquar cat No - TQT512 / Player cat No- PAS 106 / Prayag cat No - 6608
S & F in repairs 15mm bore, fancy type chromium plated shower rose 125mm dia with shower arm complete all as specified and directed. Make : Essco Jaquar cat No - EOS-542A / Player cat No- AS1016 / Prayag cat No - BS-67
S & F in repair for 15 mm bore CP pillar taps quarter turn fancy type swan neck screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed Make :Essco Jaquar cat No -TQT-510 / Player cat No- CH1003 / Prayag cat No - 6614
S & F in repair Angle valve quarter turn cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed Make : Essco Jaquar cat No - TQT526 / Player cat No- PAS109 / Prayag cat No - 6610
S & F in repairs stop cock (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed of 15mm bore complete all as specified and directed. Make :Essco Jaquar cat No - TQT514A / Player cat No- CH 1012/ Prayag cat No - 6618
S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed
S & F in repairs C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.
S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.complete all as specified and directed
S & F PVC bath cabinet with looking mirror overall size350X450mm complete all as specified and directed
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed
S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed
S & F in repair Soap dish CP complete all as specified and directed..
S & F in repair 450mm long Stainless steel six peg hanger chromium plated complete all as specified and directed
S & F in repair sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete all as specified and directed. complete all as specified and directed
S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.
S & F in repair PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.
S & F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified and directed.
S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed.
Supply and fixing in repair Hard/Rigid PVC waste Pipe with socket, 40 mm bore for SINK complete all as specified and directed
S&F in position rotational moulded polyethylene water storage tanks (triple layered construction) 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed.
S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
M & L for PCC 1:2:4, type B0 as in padding or levelling course for filling undulations or depression on roof and for platform for mounting service tanks incl necessary form work etc. complete all as specified and directed
M & L for provision of roof treatment with polymeric water proofing membrane as specified here under :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.40 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint @ 0.10 litre/Sqm (each coat) on membrane surface all as specified and directed. Note:- (i) PCC padding or rendering for leveling of undulations on roof shall be measured and paid separately (ii) For filling undulation or levelling either PCC or rendering shall only be allowed for payment purpose.
M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing compound as per manufacturer's instructions all as specified and directed.
Compete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7”/9” to make free from dust, loose paint etc by skilled labour complete all as specified and directed.
M & L for water proof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1mm over the plastered old/new prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free form dust etc by skilled labour as per following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer’s instruction and mix it with putty mixer with the mixing capacity of min 205 kg putty per minute. Step2:- Apply the first coat of the prepared spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3:- Allow 6-8 hrs time to dry the putty surface
M & L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed
M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer’s instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between coats of paint complete all as specified and directed.
M & L for applying three coats of white wash on wall including complete removing old treated surface complete all as specified and directed.
M & L for preparation of new surface of walls and applying two coats of oil bound distemper over and including a coat of 1mm thick wall care putty complete all as specified and directed
M & L for preparation of old treated surface of walls by complete removing existing treatment and applying two coats of oil bound distemper over and including a coat of 1mm thick wall care putty complete all as specified and directed
M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.
M & L for applying two coats of white wash on ceiling including complete removing old treated surface complete all as specified and directed.
M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight including demolition of cement concrete in plinth protection ground floor complete all as specified directed
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement including demolition of cement concrete in plinth protection ground floor complete all as specified directed Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete complete all as specified and directed
M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including PCC 1:2:4 type B-0 using gap filing as required complete all as specified and directed including Dismantling of cement concrete paver block (Stone slabs and tiles of any description) in ground floor complete all as specified directed
M & L for obliterating and painting building plaque with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but n.exc 0.4 sqm each complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5/6 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per Item No 114 above but for one 5 pin 5/6 Amp socket outlet point on an independent board.
All as per Item No 114 above but for one 5 pin 5/6 Amp socket outlet point on the same board with other switch.
All as per Item No 114 above but for One bell/ buzzer point controlled by one bell push
All as per Item No 114 above but for One light point controlled by two, two way switch.
All as per Item No 114 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
S & F switch piano flush button single pole one way 5/6 Amp 240 volt complete all as directed.
S & F switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specifed and directed.
S&F switch piano flush button single pole two way 5/6 Amp 240 volt complete all as specifed and directed.
S&F socket outlet flush type multipurpose 2 in1, 6 pin 5/6 and 15/16 Amp, 230 voltscomplete all as specifed and directed.
S&F socket outlet flush type multipurpose 2 in 1, 5 pin 6Amp, 230 volts complete all as specifed and directed.
S&F ceiling rose surface bakelite three terminal complete all as specifed and directed.
S&F bell push single pole one way 5/6 Amp, 240 volt flush type complete all as specifed and directed.
S&F call bell AC single pole 240 volt ding dong type complete all as specifed and directed.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specifed and directed.
S&F fan regulator electronic,step up socket type,230 volt,125 W and connection complete all as specifed and directed.
Supply and fixing LED lamp 7/9 watt, complete all as specified and as directed.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite BN 021 LED 12S 6500/4000 PSU GR/SI /Havells LUMILINE+BS10WLED865SPCSS/Orient Taskline AI LBLN-12-C-AL
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells LUMILINE+BS20WLED865SPCSS/ Bajaj LED batten BCLAB 20W WH LED P
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060/Bajaj ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge. Make philips Green line smart cat no BRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt cat part No ENXT P 24L WH CR PC SD/Havells Endura Sundown with cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/Havells RUGBYGENXFTS10WLED865SSYMBOPC
M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blanking plates for unused way complete all as specified and directed.
S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blanking plates for unused way complete all as specified and directed.
S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Taking down electric meter and refixing on new board after rewiring in replacement of unserviceable complete all as specified and directed.
S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.
M& L for ceiling fan clamp made U shape in MS round bar of 10 mm dia for hanging of ceiling fan any size (1200/1400mm) sweep including all fittings & fixtures i.e nut, bolt, anchor fastener and fixed to ceiling completed all as specified and directed.
Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match existing surface including louvers and making connection with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all specified and directed
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs with copper tank to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. NOTE:- Product must have 2 years warranty on heating element & 5 years warranty on inner tank.
M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .
M R CONSTRUCTION
EVEREST CONSTRUCTION
M/s SNS Construction
M/S Vindhya Infraventures
M/S Dwivedi Construction Coy
M/S SHIVA CONSTRUCTION
QUALITY CONSTRUCTIONS CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .