Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹19.5 LAccepted-Finance | 1 | Accepted-Finance Lowest Rate | |
| 2 | 2₹20.1 L+₹57,681 (2.96%)Rejected-Finance | 2 | Rejected-Finance Higher Rate | |
| 3 | Rejected-Technical | - | Rejected-Technical Technical Bid Found Not Ok. |
Tender Value
₹22 L
EMD Value
₹22,000
Closing Date
7 Oct 2023, 1:00 pmClosed
SE EDC Etah
Vidhyut Colony, Aruna Nagar, Railway Road ,Etah
Various Electrical work of electric supply in the area of EUDSD Ist, Etah (EUDD, Etah) under additional business plan (339 Cr.) on Semi Turnkey basis
2023_DVVNL_842888_1
49/2023-24/EDC ETAH
Open Tender
Electrical Works
Turn-key
Distt Etah
As per Tender Documents.
2 documents required · 2 mandatory
₹3,540
DVVNL
₹22,000
17 Oct 2023
24 Sept 2023
7 Oct 2023
24 Sept 2023
7 Oct 2023
24 Sept 2023
Amount
Supply of The Line Material as per Relevent ISS :-
Danger Board with Barbed wire including Jumpering
Dead End Clamp
Holding Clamp for Top Chanel
I Hook
LT Pin Clamp for PCC
MS Droper Chanel
MS Top Chanel with Clamp
Nut and Bolt with Washer
Stone Pad
Suspension Clamp
LT incoming Panel with metering equipment
Copper L Piece
Alluminium Lug
Alluminium Paint
Red Oxide Paint
TF Base Angle
PRC Connector
T Chanel Chanel Clamp
T Chanel
Tripping Coil for VCB (Areva)
Tripping Coil for VCB (Stelmac)
LT Protection for DT (MCCB)
LT Protection for DT
DC Converter with Battery
Erection Work :-
Safe carriage of line material from store center Etah to pit site in distance range 0 to 10 km including loading & unloading at both ends.
Safe carriage of 33 KV VCB from store center Etah to pit site in distance range 0 to 10 km including loading & unloading at both ends.
(a) 11 KV VCB Outgoing/Incoming
(b) 33 KV VCB
Safe carriage of 33 KV/11 KV CT from store center Etah to pit site in distance range 0 to 10 km including loading & unloading at both ends.
Safe Carriage of 8.5 Mtr Long PCC Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 10 Kms. Including loading and unloading at both side
Safe Carriage of 11 Mtr Long ST Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 10 Kms. Including loading and unloading at both side
Safe Carriage of following TF from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side.
(a) 250/400 KVA TF
(b) 100 KVA TF
(c) 16 KVA TF
Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc and other work complete as per RESPO norms.
Erection of 11 mtr long ST Pole as single support including fixing of HT/LT accessories etc and other work complete as per RESPO norms.
Erection of 11 mtr long ST Pole as Double Pole including fixing of HT/LT accessories with TPMO etc and other work complete as per RESPO norms.
Mounting of following TF on Double Pole/Single Pole including making of the connection etc. complete.
(a) 250/400 KVA TF
(b) 100 KVA TF
(c) 16 KVA TF
Laying sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.
(a) ACSR Weseal Conductor
(b) LT ABC Cable 3x120 sqmm
(c) LT ABC Cable 3x95 sqmm
(d) LT PVC AL Cable 3.5x150/3.5x400 sqmm
(e) Cable 4x2.5 sqmm
Earthing Complete
11 KV VCB O/G CTR 200/100/5Amp, 350 MVA
11 KV VCB I/C CTR 600/300/5Amp
3 Phase Distribution Box
33 KV Control Panel for Double TF
Construction of 250/400 KVA T/F Plinth all cost of all Cost of labour and T&P which required for completion of work
Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut
Pipe earthing of 250/400 KVA medium Power Transformers
33 KV VCB 800 Amp, 750 MVA
33 KV CT, 400 Amp/200/1-1-1 Amp
11 KV CT I/C 600/300/5Amp
11 KV CT O/G 400/200/5Amp
33 KV Lighting Arrestor
33 KV Fuse Set
Danger Board with Barbed wire including Jumpering
Dead End Clamp
Stone Pad
Fixing/Erection of LT Incoming Pannel with Metering Equiptment, Grouting as per respoo manual all cost of labor, material and T&P which required for completion of work
Tripping Coil for VCB (Areva)
Tripping Coil for VCB (Stelmac)
LT Production for DT (MCCB)
LT Production for DT
4 Core LT MCB with Box
Single Core PVC Cable 1x240
Single Core PVC Cable 1x400
Single Core PVC Cable 1x630
Erection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.
Any other material/consumable required to complete the work shall be arrange by the contractor at his own cost.
Carriage of line material (Scrap) from pit site to JE store/store center Etah in distance range 0 to 10 km. including loading & unloading and proper stacking.
(a) 11 KV VCB Outgoing
(b) 10 KVA TF (old)
(c) 100 KVA TF (old)
YASH URJAA VARDHAN PVT. LTD.
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .