SPECIAL REPAIR OF HQ AND OP COMPLEX AT 104 (H) SQN AT AF STN SURATGARH

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any type of mortar.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises

Material and labour for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (including size 400mmx400mm), as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Material and labour for Vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15 mm thick screed bedding in CM (1:6), complete all as specified and directed.

Material and labour for Vitrified ceramic tiles 10 mm thick ( Square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including provision of backing coat of 10mm thick in CM (1:4), complete all as specified and directed.

Supply and fixing of glazed ceramic tiles size 350x250x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.

Material and labour 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing 15mm screed bed (1:6 ) in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Material and labour for Udaipur green marble 18 to 20mm thick, prepolished, as in window & ventilator cills in single length including 15 mm screed bed (1:6) of cement mortar fixed & pointed all as specified & directed by Engr-In-Charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15cm thickness below or above ground level etc all as specified and as directed by Engineer-in-Charge.

Material and labour PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub bases, 75 mm thick complete.

Material and labour for screed bed or bedding layer of mortar 20 mm thick for laying floor finish in CM (1:6).

Material and labour 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Material and labour For Type B1 1:2:4 (20 mm graded aggregate) Providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges and roof as specified and directed by engineer-in charge.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for leveling course for consolidated thickness shall be varied from 25 to 55 mm as per the requirements all as directed by Engr-in-Charge.

Material and labour for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)

Supply only integral Waterproofing compound.

Material and labour for Water proofing treatment with APP based Polymeric membrane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3kg per Sqm and minimum 3 mm thick reinforced with non-woven polyester fabric (weight not less than 150 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth complete all as specified and directed.

Material and labour Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge.

Material and labour Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge.

Post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr / hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-In-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified and directed by Engineer-in-charge

Material and labour for rendering 10mm thick plaster on brick or concrete surfaces in cement mortar (1:6) finished the surface even and fair without extra cement as internal surfaces of wall.

Material and labour for rendering 15mm thick on concrete or brick masonry surfaces or surface of brickwork in CM (1:4) as in external surfaces of wall.

Material and labour for Rough cast plaster as specified and directed by Engr in charge.

Material and labour for 5 mm thick, plaster in cement mortar (1:3) on surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper on chalk whiting over a coat of primer all as specified & directed by Engineer-in- Charge.

Material and labour for preparation of plastered surfaces of ceiling and applying two coats of white wash all as specified & directed by Engineer-in- Charge.

Material and labour for preparation of new plastered of wall and applying two coats of exterior acrylic emulsion (weather proof coat ) paint of approved quality, in camouflaging patterns, including applying a coat of primer new surfaces ,complete all as specified and directed.

Material and labour for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a two coat of oil bond distemper over a coat of putty 1.5mm thick on surfaces of walls complete all as specified & directed by Engineer-in-charge.

Material and labour for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

Taking down door chowkat or frame incl shutter area n exc 1.50 sqm each and removing to store.

Ditto all as per item No- 31.00 here in before but area exc 1.50 sqm and n exc 4.00 sqm

Supply and fixing of 35mm thick factory made plain framed, paneled shutters (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated all as specified.

Supply and fixing of 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

Supply and fixing of pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of PCC 1:2:4 type B-0 in pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of PCC 1:2:4 type B-0 in pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing of mild steel work as in bands, straps, hold fasts etc and like small articles conforming to Fe-290 Gde E-165.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing

Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

Supply and fixing of mild steel butt hinges minimum weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

Supply and fixing of Aluminium handle, cast type, anodised of size 150 mm & fix to shutter complied all as specified & directed by Engineer-in-Charge.

Supply and fixing of Aluminium anodized, barrel tower bolt of extruded section and fix of length 150mm

Supply and fixing of 300mm long aluminum alloy, anodized, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed.

Supply and fixing of floor door stopper of aluminium 150mm size.

Supply and fixing of stainless steel wire 0.36mm normal dia of wire and average width of aperture 1.40mm complete all as specified & directed by Engineer-in-charge.

Supply and fixing of 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane.

Supply and fixing of 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqm in each pane.

Material and labour for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer

Material and labour for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and labour for II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

Supply and fixing of 25mm thick , Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneers on both faces, fixed with screws to timber frame-work

Supply and fixing of Second Class Hardwood, plain fillets square rectangular or triangular in section wrought sectional area exceeding 13 sqcm and n exc 25 sqcm fixed with nails, bull nosed, splayed, chamfered or rounded on one edge or face

Supply and fixing of 150 mm Hasp and staple, aluminium anodized, wire type, stove enameled black, including bolt to hinge plate and fixed with screws

Supply and fixing of Continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of flaps 40mm ( when open)

Supply and fixing of 40 mm knobs of brass, polished fixed with nut screw &washer bright finished complete

Supply and fixing of in repair curtain rail, mild steel, chromium plated with fixing brackets, stops roller etc. all as specified & directed by Engineer-in-charge.

Material and labour for 75mm thick PCC 1:3:6 type C-2 as in flooring all as specified & directed by Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I, 500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fixing of Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc. including taking down of existing unserviceable old pipe with all fittings.

Supply and fixing of Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc. including taking down of existing unserviceable old pipe with all fittings.

Supply and fixing of gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and directed.

Supply and fixing of gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe complete all as specified and directed.

Supply and fixing in repairs for stop cock copper alloy but fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/ pipe or for union and fixed to 15 mm bore pipe in repairs complete all as specified and directed.

Supply and fixing of in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

Supply and fixing in repairs viterious china White Wash Hand Basin fixed in repairs including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brass CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long complete all as specified and directed.

Supply and fixing in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fixing of towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats in repairs complete all as specified and directed.

Supply and fixing in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

Supply and fixing in repair CP Shower rose 125mm size with swivel joint including fixing steel pipe for union.

Supply and fixing of Powder coated (minimum thickness of powder coating 50 micron) aluminium frame & shutter for door, window , ventilator and partition including necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading, etc complete all as specified & directed by Engineer-in-charge. (Note :- Floor door spring & sheet glass shall be measured and paid separately).

Material and labour for powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading, screws etc. complete all as specified

Material and labour for powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified

Material and labour for sheet glass 4.8mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

Material and labour Solar control film 25 micron reflective type stuck to glass panes as per instructions of manufactures as specified and directed by Engineer-in-charge

Supply and fixing of 2 levers brass mortice lock vertical type, size 100mm including escutcheon plates and two keys complete all as specified & directed by Eng-in-Charge

Supply and fixing of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Supply and fixing of 0.9mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions

Material and labour for 12mm thick suspended Gypsum cove and coffered false ceiling 600mm wide ( as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2 m in one direction and 45 cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including Two coat of plastic emulsion paint over a coat of primer on exposed surface, the frames work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall , making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed including dismantling and removing of existing false ceiling complete all as specified and directed

Material and labour for taking down existing Galvalume AC cover and re installation the cover back in position including pedestal and grouting as specified and directed by Engineer in charge.

Supply and fixing of framed work such as grills, gratings etc with ends of bars shouldered or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work confirming to Fe 290 Gde-E-165.

Supply and fixing of Solid PVC wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed including dismantling of existing unserviceable old boarding of any description and fixed with screws.

Supply and fixing of Solid 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Supply and fixing of 9mm thick perforated gypsum board/ Tile of size 600x600mm with aluminium foil another side over and including grid form GI power coated (605mm x605mm) with T section of size 24 x38x 2 mm (both cross and main) and angle of size 25 x26x2mm properly fixed to wall and fixed to ceiling with 10GA GI vertical hangers @300mm C/C again which tie up with ISA 32x32x3m @300mm C/C properly with the help of 2 no 16mm dia. 120mm long dust fastners, completed all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation as directed .

Supply and fixing of in repairs for European type vitreous China wash down water closet pan (pedestal pattern), white, including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete.

Supply and fixing of in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) set etc complete including trap set as specified and directed by Engineer-in charge

Supply and fixing of PVC connections 15 mm size with PTMT nuts to length 450 mm as in repairs complete all as specified and directed.

Supply and fixing of PVC flushing cistern 10 litres capacity ISI marked incl PVC down take pipe PVC 450mm inlet etc all complete in repairs.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed by engineer in charge

Supply and fixing of PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

Supply and fixing of PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia out let.

Supply and fixing of PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

Supply and fixing of PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

Supply and fixing of 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

Supply and fixing of PVC (SWR) bends with access door of 110 mm dia, any radius

Supply and fixing of PVC(SWR) bends with access door of 75 mm dia, any radius

Supply and fixing of PVC (SWR) bends of 110 mm dia, any radius

Supply and fixing of PVC (SWR) bends of 75mm dia, any radius

Supply and fixing of (PVC (SWR) vent cowl, 100 mm dia

Supply and fixing of chromium plated fancy Bib taps with crutch or butterfly handle, sc-screwed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed

Supply and fixing in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed

Material and labour for demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Material and labour for brick with subclass B bricks, straight curved on plan exc 6 m mean radius in Cement Mortar 1:6 complete all as specified and as directed.

Material and labour for half brick works with sub class B bricks straight or curved on plan mean in any radius built in CM 1:4 complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B2 by using 40 mm graded crushed stone aggregate in surface channels and drains etc complete all as specified and directed.

Demolition of reinforced concrete of any description and n any position not other wise specially provided for

Demolition of cement concrete bed in haunching and breaking up RCC drain pipes set in cement mortar of 150 mm Dia

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide in manholes etc.. and getting out any type of Soil

Material and labour for concrete bed in P.C.C. 1:4:8 type D2 (using 40mm graded aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for the 150 mm Dia

Material and labour for reinforced concrete NP2 drain pipes 150 mm Dia pipes confirming to IS laid in trenches and jointed in CM 1:2 all as specified & directed by EIC

Material and labour for cutting in to existing manhole for connecting new drain 150 mm bore , making good to pipe & rendering cutting out existing benching for & forming branch channel in cement concrete ( 1:2:4) type C1 smooth finished & reforming benching as required.

Material and labour for plain cement concrete 1:3:6 Type B1 using 20mm graded aggregate as in coping including form work etc complete.

Material and labour for precast cement concrete type B1 ( 1:2:4) 20 mm graded aggregate for manhole cover slab setting in C:M (1:4)

Supply and fixing of TMT bars 8mm dia cut to lengths bent to shape required including cranking, bending spirally for hooking and binding with MS wire (annealed) not less than 0.9 mm dia etc all as specified & directed including handles for MH covers etc complete.

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

Supply and fixing of for MS work confirming to Fe-290 Gde E-165 as in post, strut, purling & wind ties with (MS flat iron fillet, MS plate, round tubes & angle iron) necessary cutting, drilling, welding, bolting or riveting etc including embedding in concrete complete to any type of posts screwed in position with nuts, bolts & washers, etc all as specified.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws as specified.

Material and labour for RCC design mix M- 25 using 20 mm graded crushed stone coarse aggregate in Columns, pillars, piers, etc complete all as specified and directed

Material and labour for RCC design mix M- 25 using 20 mm graded crushed stone coarse aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

Material and labour for RCC design mix M- 25 using 20 mm graded crushed stone coarse aggregate in slabs supported on walls, beams and columns in floors, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed

Material and labour for RCC design mix M- 25 using 20 mm graded crushed stone coarse aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Material and labour Formwork to cornices and mouldings of any shape in cross section and of any girth

Material and labour for formwork form work to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Material and labour for TMT bars 10mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250 complete all as specified and directed

Supply and fixing of Sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane

Supply and fixing of 12mm thick ,Pre-laminated particle, board, exterior grade, pre-laminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work

Supply and fixing of door closer hydraulically regulated, designation No. 3, universal type, aluminium extruded sec body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Material and labour for dismantling wrought iron or mild steel work of any description no otherwise provided for

Material and labour for dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Material and labour for anti skid, high flexural strength, wear resistance, fire resistance, frost resistance, eco friendly, chemical resistance heavy duty vitrified paving tiles 15 mm thick(square/rectangular) size of tiles 300 x 300 x 15 mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over screed bed complete all as specified and directed by Engr in Charge.

Material and labour for European ceramic one piece water closet with soft close seat cover(floor mounted, p trap outlet is from wall , size of 26 Inch x 14 inch x 29 inch , centre of outlet to wall is 9 inch including all necessary accessories complete all as directed by engr in charge.

Material and labour for fancy designed ceramic urinal pot wall mounted of dimension 370 x 315 x 620 ( L x W H ) and including all necessary accessories complete all as directed by Engr in Charge.

Material and labour for fancy designed ceramic pedestal type wash hand basin bowl sink round for bath room 16 x 16 x 35 inch including swan neck type chromium plated fancy pillar tap and all necessary accessories complete all as directed by Engr in Charge.

Material and labour for over head shower of size 200 mm x 200 mm square shape brass body with chromium plated and necessary accessories complete all as directed by Engr in Charge.

Supply and fixing in repairs CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete

Material and labour for anodised frame works such as grills with frames and frame guard bars and similar works , complete all as specified and directed

material and labour for chipping of unsound/weak concrete material of 25mm average thickness from slabs beams, columns walls etc with manual chisel and /or by standard power driven percussion type or of approved make including tapering of all edges , making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lift all as per direction of Engineer-in-charge.

Providing, mixing and applying bonding coat of epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-in-charge complete in all respect.

Material and labour For applying a layer of zinc rich epoxy primer as in anti rust on all exposed reinforcement followed by a layer of binding coat of epoxy adhesive on complete exposed surface of concrete as per direction of Engineer-in-charge.

Material and labour for Guniting work to RCC work in columns , beams , chajjas, balconies , slabs , landings and roof projection etc by removing loose concrete using adhesive plaster of grade 1:3 (01 part of cement and 3 part of coarse sand ) with a average thickness of 25 mm and making the surface even and smooth including mixing plasticiser as per manufacturers instructions Make as approved. The adhesive plaster is to be placed by pressure gunitting nozzle using gunitting plant providing gunitting pressure @ 2.50 kg / Sqm including fixing of welded wire mesh fabric of wire not less than 75 mm x 75 mm x 2 mm including all necessary formwork / scaffolding and making the surfaces even smooth by using up to 10 mm thick cement mortar plaster in CM (1:3) complete all as specified and directed by Engineer in charge.

Material and labour for reinforcement of 8 mm dia TMT bar welded at the rate of 0.60 m C/C embedded 75 mm at each end into existing beam using hilty chemical or equivalent complete all as specified and directed by Engr in charge. as specified and directed.

Material and labour for reinforcement of 10 mm dia and above TMT bar , welded in columns, beams etc embedded 75 mm at each end into existing wall and any RCC members using hilty chemical or equivalent complete all as specified and directed by Engr in charge. as specified and directed.

Material and labour 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) as specified by Engineer in charge.

Ditto all as per item No- 148.00 above here in before but except tiles.

Material and labour flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3.

Dismantling brick tiles or terracing tiles single layer on roofs.

Dismantling mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part there of complete all as per specified.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store(Accessories or components to be provided free for replacement by department), complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

Taking down unserviceable DB's box including MCB's of any size/rating, complete all as specified and as directed.

Material and labour for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLSH cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed GI modular boxes in wall of required size and colour for modular switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLSH earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point/ceiling fan/exhaust fan controlled by one SP switch including making good disturbed surface, complete all as specified and directed. Note :- GI modular boxes and modular sheets Cost for cutting the wall/Ceiling for conduit fixing, The disturbed surfaces of wall for concealing the wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

All as per Srl item No 157 here-in-before but for one 5 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 157 here-in-before but for one 5 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size, complete all as specified and directed.

All as per Srl item No 157 here-in-before but for one power point 6 pin 15 Amps socket out let on Independent board with 2.5 Sq mm stranded copper conductor FRLSH cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLSH cable connected to earth dolly complete, all as specified and directed.

All as per Srl item No 157 here-in-before but for one bell point controlled by one bell push, complete all as specified and directed.

All as per Srl item No 157 here-in-before but for Geyser point, sheet metal enclosure with 2.5 Sq mm stranded copper conductor FRLSH cable PVC insulated including earth wire 2.5 Sq mm copper conductor FRLSH cable connected to earth dolly complete, all as specified and directed.

Supply and fixing of modular switch one way 6 Amps one module complete all as specified and directed by Engr-in-Charge.

Supply and fixing of modular socket 6 and 16 Amps 3 & 6 Pin combined 02 module complete, all as specified and directed by Engr-in- Charge.

Supply and fixing of modular socket 6 Amps 5 Pin combined 02 module complete, all as specified and directed by Engr-in-Charge.

Supply and fixing of modular switch one way 16 Amps, one module complete, all as specified and as directed by Engr-in-Charge.

Supply and fixing of modular switch Bell push, flush type one module complete all as specified and directed by Engr-in-Charge.

Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of door bell ding dong, AC, 230 Volts, single pole.

Supply and fixing of lamp holder, PVC/polycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of LED bulb 10 watt, complete all as specified and directed.

Supply and fixing of LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing of LED bulkhead luminaries 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and directed .

Supply and fixing of LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.

Supply and fixing of in replacement of LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible conductor cases of suitable size complete.

Supply and fixing of in replacement of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing of in replacement of surface mounted 12 Watt LED Focus/spot light for the picture, fittings luminaries with ABS Body & Polycarbonate diffuser, IP 54, PF Min 0.95 complete after dismantling/ taking down existing one of any make/size complete all as per specified and directed.

Supply and fixing of in replacement of LED building security light 35 watt, 230V with lens and toughen glass top. The luminaries should have a colour temperature of 6500K, IP 65 complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades deposit to store yard as it is in working condition for further hanging in its original position or any other position including as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service includes cleaning, greasing and oiling, painting of fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed by Engr- in-charge. Note :- Any damage has to be made good by the contractor to make the item functional after testing.

Supply and fixing of Modular Fan step regulator 02 Module, 120W 230 volts, 50 HZ, AC. Supply complete all as specified and as directed.

Taking down exhaust fans of any sweep and any size including cable connections and removing the exhaust fan with blades deposit to store yard as it is in working condition for further fixing in its original position or any other position as per direction of Engineer-in-Charge including it's fitting and fixtures after carrying out service i.e. cleaning, greasing and oiling, painting of exhaust fan with one coat of synthetic enamel spraying painting including marking of MES number with black paint after preparation of surface reassembling the fan etc including testing complete all as specified and as directed . Note :- Any damage has to be made good by the contractor to make the item functional after testing.

Taking down window/Split type Air conditioner after disconnecting indoor and out door unit of capacity 1.5/2 ton and re-fixing same after work , fixing with all required accessories including charging of refrigerant up to desired pressure , copper coil extra all as directed by Engineer-in-Charge.

Supply and fixing of in replacement of sheet metal enclosures single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified and directed.

Supply and fixing of in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of in replacement of MCB SP, 6-32A,10KA complete all as specified and as directed .

Supply and fixing of in replacement of MCB SPN, 32A ,10KA complete all as specified and as directed .

Supply and fixing of in replacement of Vertical MCB DB TPN 6 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V including provision for mounting MCCB up to 250 Amps rating complete all as directed by Engr-in-Charge.

Supply and fixing of in replacement of Vertical MCB DB TPN 4 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V including provision for mounting MCCB up to 125 Amps rating complete all as directed by Engr-in-Charge.

Supply and fixing of in replacement of MCCB four poles,250 Amps, breaking capacity 36 KA, Adjustable type confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Supply and fixing of in replacement of MCCB four poles,160 Amps, breaking capacity 36 KA, Adjustable type confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Supply and fixing of in replacement of MCCB four poles,125 Amps, breaking capacity 16 KA, confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Taking down disconnect all connection & Reuse sheet metal enclosure for distribution board SPN (when MCBs to be used) 4/8/12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail making good complete all as specified and as directed by Engr-in-Charge.

Taking down disconnect all connection & Reuse sheet metal enclosure for distribution board TPN (when MCBs to be used) 6/8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail making good complete all as specified and as directed by Engr-in-Charge.

Material and labour in replacement of for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009)

and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed. Note-: The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/ BOQ.

M/S Shree Ram Enterprises (BID ID -3460490)