Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC VILL NANDA KA NAGLA DHAOLI AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹17.4 L+₹3.9 L (28.9%)Rejected-Finance | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹19.4 L+₹6.0 L (44.3%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹23.6 L+₹10.2 L (75.6%)Rejected-Finance H O 325 JAIPUR HOUSE AGRA 282010 | AGRA | UTTAR PRADESH | 282010 | L4 | Rejected-Finance Being higher bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tech Area Agra
GE AF Tech Area Agra
CERTAIN MISC B/R REPAIRS TO WSA AND NEAR BY BLDGS UNDER GE(AF) TECH AREA AT AF STN AGRA
2022_MES_541427_1
8200-1435/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Tech Area Agra
As per NIT
10 documents required · 10 mandatory
₹500
Yes
GE AF Tech Area Agra
₹50,000
Yes
29 Nov 2022
27 Jul 2022
27 Aug 2022
27 Jul 2022
25 Aug 2022
11 Aug 2022
27 Jul 2022 - 3 Aug 2022
Amount
Dismantiling of plain or corrugated steel sheeting any gauge, thickness of roof coverings etc complete all as specified & directed.
S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self taping screws complete all as specified & directed.
S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering/cladding to wall,fixed with self taping screws complete all as specified & directed.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed by Engr-in-charge.
Dismantling floor,hearth or wall tiling including cement mortar bedding/backing,removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge.
M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course including necessary formwork finishing the surface even and rough etc complete all as specified & directed by Engr-in-charge.
M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified & directed by Engr-in-charge.
M&L for Vitrified ceramic tiles 9 to10 mm thick (Square / rectangular) light shade polished, area of each tile not exceeding 0.36 sqm as in skirting etc laid over and including backing coat or bedding layer of 10mm thick 1:4 cement mortar for laying wall/vertical finish, jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified & directed by Engr-in-charge.
M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified & directed by Engr-in-charge.
M&L for glazed coloured ceramic tiles 200x300mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc including laid over and inculidng 10mm thick cement mortar 1:4 for laying wall/vertical finish set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles etc complete all as specified & directed by Engr-in-charge.
M&L for 75 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in plinth protection,pathway,steps, flooring surface finished even & smooth using extra cement including necessary form work etc complete all as specified & directed by Engr-in-charge.
M&L for Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed by Engr-in-charge.
M&L for Sand filling under interlocking tiles or in foundations including watering and consolidation complete all as specified & directed by Engr-in-charge.
M&L for rubber moulded Machine pressed precast conctete interlocking paver block with grey cement and coloured pigment any shape and size confirming to IS 15658-2006 of 50 - 60 mm thickness, M-35 Grade complete all as specified and as directed.
M&L filleting in any position and to any shape in cement morter 1:4 including all mitres, stops, etc. exc. 25 sq.cm but n.exc 50 sq.cm complete all as specified & as directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in sub base to floors and paving including necessary form work etc all complete all as directed by Engr-in-charge
M&L for Chequered cement concrete tiles 25mm thick with mixture of white and grey cement in equal proportion and pigment, area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm, set jointed and pointed in neat cement slurry in floors,laid on and inclduing screed bed or bedding layer of mortar 15mm thick cement mortar 1:6 complete all as specified & directed
Dismantling mild steel or wrought iron work in roof trusses,gratings etc and similar work complete all as directed
S&F mild steel framed work such as grills gratings etc with ends of bars shouldered, riveted or forged into spikes,framed guard bars, barred iron doors, ladders, framed blasters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified & directed.
M&L for mild steel work in roof trusses, (framed) purlins, rafters, wind ties, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tee,Angle,Channel or Flat sections) including distance pieces,cleats conforming to Fe 410-W (Gde E-250) Quality A etc complete all as specified and directed.
Demolition of brick work masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excl ashlars facing,dressed stone work and pre-cast concrete articles complete all as specified & directed by Engr-in-charge
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed by Engr-in-charge
M&L for Providing cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in surface channel and drains complete all as specified & directed by Engr-in-charge
M&L for Providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in copings, apex stones, bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified & directed by Engr-in-charge.
M&L for cleaning of blocked manholes/sewage line by mechanically using water sucking hydraulic pressure machine(min 3000ltr capacity) all as specified & directed by Engineer-in-charge and disposed off the blockage materials /waste out side the defence area.Note :- The contractor shall deploy the machine within one hour after receipts of complaint by user In case contractor failed to deploy the machine a recovery of Rs.1000/- per day shall be deducted from his payment. The contractor quoted rate shall be deemed the above provision.
M&L for cleaning of chocked /blocked sewage lines of any bore pipe by rodding /mechanically taking out loose sedimented sand dirt, oil and grease, sludge water, rags, fibers or vegetation etc from any depth of sewage lines including removal of sludge/debris/building materials to a distance exc 250m but n.exc 500m and buried under ground complete all as specified and as directed. Note:- All T&P if required are deemed to be included in the quoted rate.
M&L for cleaning of drain n.exc. 60 cm wide and n.exc 60cm in depth by removing deposited soft / loose soil and other foreign material and removal of excavated material to a distance exc 50 m but n.exc. 100 m and deposited wherever complete all as specified & directed by Engr-in-charge
Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed
M&L for rendering 10 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface etc complete all as specified and directed.
M&L for rendering 15 mm thick on brick or concrete surface of external walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction etc complete all as specified and directed. Note:- WPC will be measured & Paid separately as supply only under relevant item.
Supply only integral water proofing compound
M&L for preparation of newly plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of alkali resistance primer complete all as specified and directed
M&L for preparation of old decorated surfaces after complete removal of existing treatment of plastered or un-plastered surfaces of walls and applying two coats of distemper oil emulsion white over a coat of alkali resistance priming paint etc complete all as specified and directed.
M&L for Finishing new wall surfaces with Acrylic Smooth exterior paint in Normal/ camoflage pattern of required shade in two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.
M&L for preparation of old decorated surfaces by complete removal of existing treatment of plastered or un-plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-In-Charge.
M&L for preparation of old wooden surfaces and applying one coat of synthetic enamel paint complete all as specified & as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified & directed by Engr-in-charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified & directed by Engr-in-charge.
Dismantling chain link fencing wire mesh, of any type and size complete all as specified & directed by Engr-in-charge.
M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as directed by Engr-in-charge.
M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as directed by Engr-in-charge.
Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engr-in-charge) complete all as directed by Engr-in-charge.
Fixing only chain link fencing of any mesh, size and type fixed to RCC / steel post with mild steel flat & nut bolt etc,including wires necessary bolting and provision of binding wire etc complete all as directed by Engr-in-charge. Note:- The quoted rate shall not be deemed included the cost of chain link fencing & line wire same shall be measured and paid separately under relevant item
S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as directed by Engr-in-charge. .
S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified & directed by Engr-in-charge.
S&F in repair concertina coil 900 mm dia ( in stretched position), super razer punches barb tape (SRBT) hot dip galvanised stee/ wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified & directed by Engr-in-charge.
M&L for preparation of new surfaces of steel exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc red oxide primer complete all as specified and as directed by Engineer-In-Charge.
Taking down existing rolling shutter complete any type, width and height not exceeding 3.5 mtr in any position complete all as specified (status) & as directed by Engr-in-charge.
M & L for 1.25mm thick laths steel rolling shutter (manualy type) upto height 3.5m, without ball bearing as specified including guide channel, top hood covers anchoring rod, hasp and staple and other necessary, accessories required to function the shutter including one shop coat of primer and erected in position as indicted complete all as specified and directed by Engr-in-charge.
Taking down door/window chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including making good with CM 1:4 complete all as specified & directed.
S&F Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note :- (minimum thickess of powder coating 50 micron)
S&F powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges 03 No's, Tower bolt 02 No's, Powder coated aluminum snap beading screws etc. complete all as specified and directed. Note:- (Minimum thickness of powder coating 50 micron)
S&F factory Made Solid PVC Moulded Door Shutter 28 to 30mm thick stiles (minimum thickness of powder coating 50 micron) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified & directed.
S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and directed by Engr-in-Charge.
S&F Stainless Steel fnished barrel tower bolt 150 mm long of extruded section and fixed complete.
S&F Stainless Steel fnished barrel tower bolt 100 mm long of extruded section and fixed complete.
S&F 100 size mm stainless steel butt hinges medium grade all as specified and directed by Engineer-in-Charge.
S&F 150 mm size extruded Aluminium alloy handles fabricated type all as specified and directed by Engineer-in-Charge.
Dismantling PVC water tanks capacity exc 500 Ltrs but nexc 1000 Ltrs and removing from site complete all as specified and as directed by Engr-in-charge.
S & F rotational moulded polyethylene water storage tank 1000 ltrs capacity double layered cylindrical vertical with closed top, hoisted and fixed in position including necessary fittings, connecting up pipes etc complete all as specified and as directed by Engr-in-charge.
Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, type B1 (using 20mm graded aggregate) brick work in CM 1:4, RCC slab, with reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 20 users complete all as specified and shown on drawings No TD/217 sheet 2/2 dated 25/1/68 (Revised up to 27/6/91)
M&L Desilting, sludge, silt and kai from bottom and outer sides of static water tank of any capcity, by scrapping, brushing, brooming down, cleaning with water and applying Two coat of Cement base paint to inner/Outer surface of static water tank and depositing sludge to a distance exc.1.5 and n.ecx. 5.0 KM, complete all as specified and as directed.
M/s K S Builders
deva engineers
Rakesh Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .