SPECIAL REPAIR TO BLDG NO A/09/537 (SINGLE OFFR ACCN), ADDITIONAL ALTERATION TO BLDG NO P-717 HRDC BLDG AND PROVN OF RAIN SHELTER FOR CHILDREN NEAR THE KV SCHOOL BUS PARKING AREA UNDER GE PANAGARH

Amount

Dismantling of plain or corrugated asbestos cement sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of wall and ceiling board of any description complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

S&F powder coated anodised aluminium snap grid (605X605mm) frame work for false ceiling with all necessary aluminium angle & Tee aeeangement with and incl fixing cleats,complete all as specified and directed.

S&F Non asbestos fibre cement designer building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium frame work with screws in ceiling complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc and removing all rubbis off the premises complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in CM (1:4) on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound @ 3% by weight of cement content complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

Supply only Iiquid Water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika).

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall to prepare the surface even and smooth by applying two coats of oil bound distemper over one coat of alkali resistant primer incl 01 mm thick wall putty for complete smooth surfaces all as specified and as directed by Engr-in-charge.

M&L for prepration of old plastered surfaces of wall to prepare the surface even and smooth by applying two coats of oil bound distemper over one coat of alkali resistant primer incl 01 mm thick wall putty for complete smooth surfaces all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc complete all as specified and directed.

S&F mild steel as in trusses, purlin, crane rail and joist, channel anlge or tee sections including all necessary cutting welding etc complete fonforming to FE 410 W( Gde-E-250) quality A complete all as specified and directed.

M&Lfor two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.

Demolition of Brickwork masonry, laid in Cement mortar complete all as specified and directed.

M&L for brick work with fly ash ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed. Make: L&T/ACC/Lafarge/Shyam Steel Pvt Ltd

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM (1:6) complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surface such as skirtings etc. set and jointed in cement slurry over 10 mm thick rendering in CM (1:3) complete all as specified and directed.complete all as spd and as directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement incl 10 mm thick rendering in CM (1:4) to match all as specified as directed.Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM (1:4) complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down of chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in -Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately) Note :- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws , all as per direction of Engineer-in -Charge.

All as per item No 31.00 mentioned above but wire gauzed i.e. panel will be of wire gauze in lieu of panel. The wire gauze shall be wrapped on an additional square 8 mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as directed.

Taking down shutters of any description exc 1 sqm each complete all as specified and directed by Engr-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed..

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed..

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, locking arrangement ,C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 Type C2 as in plinth protections finishing even and smooth without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S&F 100 mm long butt hinges, extruded alluminium alloy/stain less steel with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed

Taking down steel tubing having bore of pipe 25 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n.exc 10cm girth complete all as specified and directed

S&F for 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings ( plane and brass threaded) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Item No 49.00 mentioned above but 25 mm outer dia complete all as specified and directed

S&F 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap (excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed

S&F in repair vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as spd and as directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make: Hindware/Parryware/Cera

S&F in repair 15mm bore fancy type stop valve , chromium plated concealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed

S&F as in grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and directed.

S&F as in grating square with waste hole 150mm size of PTMT(minimum 100 gms) complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the premises complete all as specified and directed.

M&L for Cement concrete 100 mm thick type B-2, 1:2:4 (using 20 mm graded stone aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to an even and rough surface as specified and as directed by Engr-in-charge.

M&L for sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan complete all as specified and directed

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

Taking down of pipes of any size or pattern including all fittings complete all as specified and directed

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps complete all as specified and directed Make : Supreme/ Finolex/Prayag

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint, laid in trenches or in floors complete all as specified and directed. Make : Supreme/ Finolex/Prayag

S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps for rain water pipes all as specified and directed . Make : Supreme/ Finolex/Prayag

S&F PVC SWR bends of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radiuswith access door complete all as specified and as directed by Engr-in-Charge

S&F 75 mm dia PVC (SWR) floor trap, plain with gratings incl jointing with solvent cement complete all as specified and directed

S&F Health faucet (ABS body) mild steel chromius plated suitable for 15mm dia pipe with 1.25 mtr long flexible tubeand ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed

S&F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair toilet paper holder , with flat recessed type stainless steel anf fixed to walls with chromium plated brass screws complete all as specified and directed.

S&Fin repair waste coupling of PTMT(Half or full threaded), 32mm bore dia of discharge pipe (Min Wt 45gms) complete all as specified and directed Make : Prayag/Polytuf/Vectus

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed

M&L for 18/19 mm thick prelamenated partical board interior graded one side prelaminated and other side balancing white, fixed with screws to timber frame work complete all as specified and directed

S&F in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed

Hacking out old broken glass (any thicknesss, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

M&L for sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm each pane 3 mm thick complete all as specified and directed

All as per item No 82.00 above but frosted glass complete all as directed by Engr-in-Charge.

Providing precast cement concrete louvres and jallies, type B0 1:2:4 (using 12.5mm graded stone aggregate), 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item and set in CM (1:4) complete all as specified and directed

M&L for cast-in-situ cement concrete in Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height ,copings,apex stones,kerbs and the like including weathering ,slightly rounded or chamfered angles and throating as desired complete all as directed by the Engr-in-charge.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L for Machine pressed Pre-polished coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M- 40 Grade with grey cement and pigments complete all as specified and directed

S&F in repair for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repair 20 mm dia Stainless steel curtain rod with complete all as specified and as directed.

S&F Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods with designer nobs complete all as specified and as directed.

S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade st-240 complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.

S&F mild steel bolts/fastner, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 10 cm and n.exc 15cm long diameter of neck in 11 to 15 mm complete all as specified and as directed.

S&F mild steel screws bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with wahsers and on hexagonal or square exc 5 cm but n. exc 10 cm long complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in foundations, filling & mass concrete complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.

M&L for prepration of newly plastered surfaces of wall and applying two coat of acrylic emulsion paint with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over one coat of alkali resistanse primer complete all as specified and directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe-410-W (Grade-E-250 Quality-A) complete all as specified and as directed.

S&F for 4.8mm thick sheet glass, ordinary and glazing with aluminium beading in aluminium frame in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and as directed.

M&L RCC (1:1.5:3) type B1 (Nominal mix) using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc surface of concrete flat complete all as specified and as directed.

M&L for 18 to 20mm thick green marble (table rubbed and polished) in steps, risers ,jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including 20mm thick screed bed or bedding layer of mortar 20mm thick in cm (1:4) for laying floor finishes complete all as specified and as directed.

S&F for 15mm bore tube' Medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as spd and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and as directed..

Removing excavated spoil to a distance not exc.50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25 CM complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (using 40 mm graded stoneaggregates) as in foundations ,fillings and mass concrete complete all as specified and as directed..

M &L for RCC (Nominal mix) 1:1.5:3 type A1 (using 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M &L for RCC (Nominal mix) 1:1.5:3 type A1 (using 20 mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC (Nominal mix) 1:1.5:3 type A1 (using 20mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for TMT mild steel bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

M&L for TMT mild steel bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders dia complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns (Flat), raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for roughed finished surfaces of concrete complete all as specified and as directed..

M&L for Formwork to sides of pillars, posts, struts, piers, columns (square) and stanchions for fair and finished surfaces complete all as spd and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed..

Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over including cement screed and jointed over and including screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finish complete all as spd and directed.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

E/M PORTION M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 124.00 above but cable 2.5 sqmm 5 Amp socket on same board with other switches complete all as specified and directed..

All as per item No 124.00 above but cable 2.5 sqmm 5 Amp socket on Independent board with other switches complete all as specified and directed

All as per item No 124.00 above but 5 Amp Calling bell point with other switches complete all as specified and directed.

Material and labour wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed By Engr-in-Charge.

S&F Bell switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed By Engr-in-Charge.

S&F socket outlet 2 in 1 multipurpose 5 pin, (6 Amps ) flush type controlled by one switch duly marked complete all as specified and directed By Engr-in-Charge.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin, (16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F Buzzer, Ding dong, AC 230 Volts, single pole 230 volts complete all as specified and directed.

S&F ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified by Engr-in-Charge.

S&F 20 watt of size (595mmx595mmx70mm) 3000K racessed mounted LED luminaire equipped with CRCA powder coating housing high transmittance diffuser for symmetric light distribution with non integral energy efficient electuonic driver .Efficacy: 120-130 Lm /watt suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed by Engr-in-charge Make: Bajaj/Havells/Phillips/CG/Jaquar

S&F 36 watt of size (595mmx595mmx70mm) 5700K Redessed mounted LED luminaire equipped with CRCA powder coating housing high transmittance diffuser for symmetric light distribution with non integral energy efficient electuonic driver .Efficacy: 120-130 Lm /watt suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed by Engr-in-charge Make: Bajaj/Havells/Phillips/CG/Jaquar

S&F sheet metal enclosure with 20 Amp MCB and two pin and earth plug and socket complete with one single pole MCB all as specified By Engr-in-Charge. Make :Havells/ABB/Legrand/Hager

S&F XLPE Cable with PVC insulated aluminium conductor served with inner sheathed of pvc tap armoured with galvanised steel strip or wire and over all PVC sheathed of size 6 Sqmm x2 core complete all as specified and directed by Engr-in-Charge .

S&F LED light fitting 1x 20 W LED polycarbonate with LED tube rod light AC decorative box type 4' with driver , holder including LED tube light connedting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed . Make: Bajaj/Havells/Phillips/CG/Jaquar

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed Make :Havells/ABB/Legrand/Hager

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Make :Havells/ABB/Legrand/Hager

S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make :- L&T or equivalent (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make :Havells/ABB/Legrand/Hager

Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

S&F switch 16 Amps, 230/240 V complete all as specified and as directed by Engr-in-Charge

S&F socket outlet 5 in 1 , 3 pin , (6/16 Amps ) flush type controlled by one switch complete all as specified and directed by Engr-in-Charge

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified by Engr-in-Charge

S&F lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings complete all as specified.

S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification).)

S&F submain two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified . (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification).)

S&F wall security light fittings 30 watts 230V, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable .

S&F 10 W LED light fitting mirror type 2',220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed.

S&F exhaust ventilation fan with louvers of sweep 300mm,230 volts 1200 Rpm, with blade and frame and loures sturdy engineering plastic complete with ,ISI marked and making hole match the surface as per existing surface complete all as directed by Engr-in-Charge.

Taking down ceiling fan cable end, dismantling blades and removing fan and blades to store and M&L painting of celling fans complete ,in situ with synthetic enamel paint by spraying including filling cavities with filler ,one coat after cleaning all dust etc.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, single door (when MCBs to be used), tripple pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including MCCB 100 Amp 4 pole complete all as directed.

S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Make :- L&T or equivalent. Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make :Havells/ABB/legrand/Hager

S&F 3 phase 415 volt of capacity 100 Amp change over switch with bus bar complete with proper thimbles ,copper reducer etc etc all as directed by Engr-in-Charge Make :Havells/ABB/legrand/Hager

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25sqmmx4core laying properly in treanche all as directed by Engr-in-Charge

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

Supply and lay in trench fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed

S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc complete all as specified and as directed.

S&F in repair multilayer Rotational / moulded Polyehtylene capacity of 1000 Ltr water tank minimum three layer (Cylindrical vertical with closed top) hoisted &including dismantling, fixed in position complete all as specified and as directed. Make : Sintex/Vectus/Prayag

S&F in repair of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut complete all as directed byEngr-in-Charge.

S&F in repair 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings all as specified & as directed including taking down old unseviceable pipe complete all as specified and as directed (Make: Bansal/Jindal)

All as per item No 166.00 mentioned above but 40 mm bore complete all as specified and as directed by Engr-in-Charge

S&F in repair 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.

S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.

SAMIRAN SARDAR

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

M/S SEHGAL CONSTRUCTION

SINGH CONSTRUCTION

rahul enterprise

M/S SUSHMA INFRA PROJECT AND POWER

M/S N B SEN CONSTURCTION

vs construction