REPAIR MAINT OF LT PANEL UG CABLE LT DISTR SYS AND OTHER CONNECTED WORK AT HD ENCLAVE NEW SWARG MANDIR OLD SWARG MANDIR MALCOLM LINE AND SYSTEM PAINTING TO LT PANELS FEEDERS PILLERS ELECTRIC POLES AND CONNECTED ITEMS AT VARIOUS LOCATIONS OF INF SCHOO

Amount

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil concrete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each concrete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point concrete all as specified and directed.

M&L for Sand cushioning with fine dry unwashed sand in trenches for protection of cables concrete all as specified and directed. Note: Punned thickness shall be measured and paid.

Supply and laying flyash brick modular size, laid in trenches as cable covers concrete all as specified and directed.

S&F in repairs Steel tubes, galvanised, light grade, ISI marked 40mm bore for protection of cable under floor, road and on wall concrete all as specified and directed.

S&F in repairs Steel tubes, galvanised, light grade, ISI marked 80 mm bore for protection of cable under floor, road and on wall concrete all as specified and directed.

M&L for attending external electric complaints by opening / disconnecting the electrical connection of defective / burnt out underground LT cable of any size & any core from main switch / DB / junction box / LT panel / L T O/H line etc. and taking out the required length of cable from existing loop and remove/ cut the defective cable,replace the same with new cable as per existing size including providing necessary thimbles / connectors at cable end and reconnecting the cable in previous location with existing main switch / DB / Junction box / LT panel / OH line etc. and make electic connection as functionable in all repspects including testing on completion all as specified and directed by Engineer-in-charge.

Note:- (A) The rate quoted shall deemed to be inclusive of the following:- (i) Necessary earth work excavation in any type of soil, returning, filling and removing extra soil. (ii) Existing bricks, sand,GI protection pipe etc. shall be removed carefully and stacks neatly near site and same shall be re- laid after attending fault/defect. (iii) Distrubed surface of road, floor etc. shall be make good to match with existing surface. (iv) Required numbers of electrician and helper shall be deployed for attending complaints regulerly on daily basis and contractor shall collect the complaints details from complaint cell of AGE E/M No.1 and same shall be rectified/ attanded within an hour and report shall be submitted to Engineer-in-charge or their authorised representative. (B) Please note that payment shall be made to contractor one time only for this items. if any fault/ default occured again on the same location/ DB/junction box/panel during currency of contract, the same shall be rectified by the contractor without any extra cost to Govt. in terms of condition 46 of IAFW of genral condition of contracts. (C) Additional bricks,sand,GI pipe etc. as required for cable protection and cushioning shall be measured and paid separetely under relevent item.

M&L for dismantling / disconnecting / removing the faulty / burnt out overhead conductor of any type / size from insulator of HT / LT pole any type by making proper shutdown from department and removing of tree / branches if any fell on Over Head Line, loose the binding wire in each insulators and disconnecting cable connection as required, remove the burnt / damage conductor / earth wire and making necessary joint with new ACSR conductor of suitable size as per existing as directed, restretching all the loose spans of ACSR conductors, earth wire etc. with insulator and providing binding wire of existing size to tigheting and making LT/HT cable in existing position and make electric connection as functionable in all respects including testing on completion complete all as specified and directed by Engineer in charge.

NOTE: The rate quoted shall deemed to be inclusive of the following:- (i) Tools and plants such as ladder,rope, cutter, axes, knife etc. as required for cutting and removing tree/branches if any fall on OH line. (ii) Insulator,binding wire etc. as required in addition to existing shall be provided by the contractor. (iii) Required numbers of Elecrician and helper shall be deployed for attending complaint regularly on daily basis and contractor shall collect the complaint details from complaint cell of AGE E/M No. 1 (iv) Additional ACSR conductor and earth wire shall be measured and paid separetely under relevant items.

S&F in replacement LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in charge.

S&F in replacement LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in charge.

M&L for cable jointing kit for 11 KV (earthed) grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE aromoured aluminium conductor cable of size 50 sq mm to 95 sq mm. Make : M-seal/Birla 3M/Denson

M&L in repairs for cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cabe of size 95 to 120 sq mm. Make M-seal/Birla 3M

Tracing out fault up to 11KV underground cable any size with the help of fault tracing machine and rectifying the same with joints as specified and directed to restore the supply complete all as specified. Note: (i). Joint kit shall be measured and paid separately. (ii) Earth work shall be measured and paid separately. However, width of trenches shall be allowed for payment as per authorized width given in SSR for each size of cable. (iii) All other necessary arrangements suitable for locating the faults deemed to be included in the unit rate quoted. (iv) T&P required for the entire job shall be provided by the contractor at his own end and nothing extra shall be admissible on this account. (v) Cable required, if any shall be measured and paid for separately.

Trimming/pruning of tree branches touching to the LT over head line or near to the LT over head line as per direction of AGE E/M /JE in charge complete including removing the tree branches from site complete all as specified and directed. NOTE - (a) Prior shut-down shall be obtained from concerned JE / AGE E/M before taking out the trimming work , by contractor (b) span from one pole to next pole (30 to 50 m) will be considered and measured as a job. (c) T & P such as ladder , rope, cutter , axes and safety of workmen, will be provided by the contractor

S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete all as specified & directed.

S&F in replacement XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 10 sqmm, 4 core in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed. Note : Earth work shall be measured and paid seperately.

All as above Item No. 17.00, but 16 Sqmm 4.0 core.

All as above Item No. 23.00, but 25 Sqmm 3.5 core.

All as above Item No. 23.00, but 35 Sqmm 3.5 core.

All as above Item No. 23.00, but 50 Sqmm 3.5 core.

All as above Item No. 23.00, but 70 Sqmm 3.5 core.

All as above Item No. 23.00, but 95 Sqmm 3.5 core.

All as above Item No. 23.00, but 120 Sqmm 3.5 core.

All as above Item No. 23.00, but 185 Sqmm 3.5 core.

S&F in replacement MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified & directed.

All as above Item No. 33.00, but capacity of 125 amps.

S&F in replacement MCCB 3- pole, 415 volts, adjustable type 160 amps with breaking capacity 36 KA complete all as specified & directed.

All as above Item No. 35.00, but 200 amps.

All as above Item No. 35.00, but 250 amps.

All as above Item No. 35.00, but 350 amps.

All as above Item No. 35.00, but 400 amps.

S&F in replacement MCCB 4 pole, 415 volts, adjustable type 250 amps with breaking capacity 36 KA complete all as specified & directed.

All as above Item No. 40.00, but 350 amps.

All as above Item No. 40.00, but 400 amps.

S&F in replacement of aluminium conductor steel reinforced, any sizes over head line conductor of any type and length as required at site including removing of foreign objects/ obstacle, if any on the over head line complete all as specified & directed.

Restringing of loose over head conductor/GI earth wire of any size and type after untyeing binding wire from insulators/cross arms to achieve permissible sag limit of over head line including new binding wire of proper size and pruning of tree branches of concerned spans and jointing of jumpers properly complete all as specified and directed at site. Note:- (i) One job consist one span of 3-phase, 4-wire over head line. (ii) The distance of one span is approx 30 to 50m.

M&L for repalcement straight through joint ( Epoxy joint) for following size PVC insulated and sheathed aluminium cable complete for following sizes :-

(a) 3.5 core, 50 sq mm

(b) 3.5 core , 70 sqmm

(c) 3.5 core , 95 sqmm

(d) 3.5 core , 120 sqmm to 150 sqmm

(e) 3.5 core , 185 sqmm

M&L for painting and welding (both weldind and painting whenever required) of old exiting LT panel of any size with two coat of synthethic enemelled paint of approved colour internally and externally , after cleaning to rusted portion of panel and finishing the surfaces including one coat of primer by Skilled Painter complete all as specified and as directed. NOTE- Repairs to LT panel boards complete incl. necessary welding works to door , replacement of unserviceable hings and all drop bolt , etc.

Maintenance of indoor Sub Stations, including cleaning of premises and surroundings upto 5m from outer face of wall, checking of oil level of transformers, cleaning and dusting out of transformers, panel boards, cleaning of earth pits to keep free from vegetation etc complete all as specified and as directed .

All as per item No 27.00 above but for out door Sub-Stns/ RMUs/ Surrounding The LT Panells including levelling of loose filled aggregate around Sub-stations/ RMU complete all as specified and as directed.

S&F in replacement mild steel galvanised stay assembly set complete comprising of 20mm dia, 400mm long stay bow, 1800 mm long stay rod 20mm dia, 300mm x 300mm x 6mm stay plate, thimble, GI stay wire of 7/8 SWG upto required length including loop type insulator of vitreous porcelain, small size with overall dimensions 90x140mm, clearance of hole 25.5mm, all as shown in electrical plate No.1 of MES Schedule part-I 2009 complete all as directed.

S&F in replacement Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size, for HT,25X20cm size complete all as directed by Engineer-in-charge.

M&L for Painting to street light pole of steel tubular swaged/ swan neck type with two coat of aluminium paint after cleaning to rusted portion of pole and finishing the surfaces including one coat primer top to bottom, painting on cross arms/FI clamps/street liht brackets of any type including making alternative blak and yellow strip with synthethic enemelled paint up to 1.5 Mtr height from ground level & writing of pole numbers with black paint on poles all as specified and directed.

M&L for painting of LT PCC poles 9.00m with acrylic paint after apply two coat of cement base primer and making the surface smooth including painting of cross arms, clamps, etc with two coat of aluminium paint and providing alternative strip of 30 cm width (3 black and 2 yellow) from bottom of pole to 1.5 m height, writing of pole numbers in yellow circle 15 cm with black paint on poles complete all as specified and directed.

Supply and Errecting LT Panel outdoor type mounted and fixed with PCC foundation , made out of MS sheet factory assembled and factory fabricated out of 3.15 mm thick sheet steel with suitable size MS angle duly spray painted with two coat of gray synthetic enamel paint over one coat of red oxide zinc chrome primer after preparation of surface , with required civil work & wiring with copper cable of suitable size, connecting including indication lamp LED type for each phase , including 3 -Pole MCCB 200 Amps, 36 KA capacity -01 Nos, ( as incommer ) & Aluminium bus bar - 400 Amps rating - 03 Nos. for phases and 400 Amp rating - 01 No. for neutral, incl inbuilt industrial type locking arrangments , front openable incl necessary arrangments for fixing with suitable, clamps,nuts, bolts wahers etc, & incl Danger notice board , feeder marked,testing and commissioning , size 600 x600x 300 mm, complete all as specified and directed by Engr-in-Charge.

S&F in replacement cable path indicator made of MS sheet of size 200 mm x 150 mm x 3 mm thick and spot welding with angle iron of size 40 x 40 x 5 mm thick, 750 mm long embedded in PCC (1:2:4) type B-1( using 12.5 mm graded granite stone aggregate) including providing one coat of synthetic enamlled black paint over one coat of red oxide primer and sign writing with white paint showing size of cable HT /LT complete all as specified & directed.

Cutting the Existing bituminouse road for passing of UG Cable in road crossing and making good of disturbed surgace of road to match the existing complete all as specified and directed by Engr-in-Charge.

S&F in replacement moulding compound Street light junction box of size 250 mm x 200 mm x 105mm complete with shock and rust proof, termite resistant, tamper proof , front openable type and including suitable provision for single phase, two wire cable (size upto 25 Sqmm 2 Core) incomming & outgoing loop -in loop connection and including one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole / wall complete all as specified and directed by Engr-in-Charge. Make - Sintex Cat part No GSJB 2520 /Hensel/ABB.

S&F in replacement moulding compound street light junction box of size 250 mm x 250 mm x 160mm complete with shock and rust proof, termite resistant, tamper proof , front openable type and including suitable provision for three phase, four wire cable (size upto 25 Sqmm 4 Core) incomming & outgoing loop -in loop connection and including one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole / wall complete all as specified and directed by Engr-in-Charge. Make - Sintex Cat part No GSJB 2525 /Hensel/ABB.

Supply, installation testing and commissioning (in replacement) of street light control box as a pole mountable enclosure conforms to IP-64 suitable for 440/230V, AC, 50 Hz, consisting of a light sensitive control system, power contactor for load switching, MCB and terminal suitable for Single- phase, 5 KW load blocks complete all as specified and directed by Engr-in-Charge. Make: Swadeep Nature Swith model No 02EC5kW1P /CG/L&T/Phillips

Supply, installation testing and commissioning (in replacement) of street light control box as a pole mountable enclosure conforms to IP-64 suitable for 440/230V, AC, 50 Hz, consisting of a light sensitive control system, power contactor for load switching, MCB and terminal suitable for Three- phase, 5 KW load blocks complete all as specified and directed by Engr-in-Charge. Make: Swadeep Nature Swith model No 02EC5kW3P /CG/L&T/Phillips

S&F in replacement MCB TPN, 415V, 40 Amps complete all as specified and as direcetd.

S&F in replacement MCB TPN, 415V, 63 Amps complete all as specified and as direcetd.

S&F in replacement MCB SPN, 415V, 40 Amps complete all as specified and as direcetd.

S&F in replacement MCB SP 5 to 32 Amps 230 Volt complete all as specified and as direcetd.

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including taking down old fencing work complete all as specified and as direcetd.

Supply only MS galvanised chain link fencing any size any type complete all as specified and as direcetd.

S&F in replacement mild steel gate with framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as direcetd.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and as direcetd.

Excavating in post holes (similar holes) each n exc 0.5 cum getting out in soft/loose soil including returning, filling in and ramming earth , in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and as direcetd.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations , filling & mass concrete complete all as specified and as direcetd.

M&L for Earthing (in replacement) complete with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.

Supply, installation, testing and commissioning out door type LT panel board ,made out of 3.15mm thick CRCA sheet , factory made, cubical type,with slanting top at leaset 10 Cm projection all around, fedder pillar type,fabricated with 50x50x6mm angle iron frame work with independent door for each feeder,busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminium duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for connecting suitable earth strips,painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangement to supply & fix the following accessories including connecting cable glands and cable lugs,fixing of earth lead to earth terminal of panel and necessary excavation & PCC foundation complete all as specified & Directed by Engr-in-Charge. Note:- Cost of all accessories are deemed to be included in the quoted rate.

Incoming (a) Aluminium bus bar - 250 Amps rating - 03 Nos. for phases and 250 Amp rating - 01 No. for neutral

(b) MCCB 4 pole 200 Amps, 415 volt, 36 KA - 01 No ( incoming) Make - Legrand /L&T/ABB/Schenider

(e) ON/OFF LED type indication lamp with toggle switch - Set of 03

Out going:- (a) MCCB 4- pole 100 Amp, 415 volt, 16 KA - 02 Nos Make - Legrand /L&T/ABB/Schenider

(c) MCCB 4 pole 63 Amp, 415 volt, 16 KA - 02 Nos Make - Legrand /L&T/ABB/Schenider

(d) MCB TPN 40 Amp, 415 volt, - 2 Nos Make - Legrand /L&T/ABB/Schenider

M/s Pratik Enterprise (BID ID -3354561)

sanjay traders (BID ID -3348597)

SAHYOG ELECTRIC (BID ID -3356129)

SANJAY ENTERPRISES (BID ID -3356662)

Manu Enterprises (BID ID -3356256)

M/s Navansh Engineers & Consultants (BID ID -3347554)

ENVIRO TECH SERVICES (BID ID -3348037)