Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC Being a lowest bidder | |
| 2 | L2₹14.3 L+₹21,042.80 (1.50%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹14.6 L+₹51,003 (3.62%)Rejected-Finance ASTBAL MOHALLA BANASAR BAGH ROAD PATIALA GATE SANGRUR 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹15.2 L+₹1.1 L (8.09%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹15.6 L+₹1.6 L (11.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹10.2 L
EMD Value
₹20,480
Closing Date
17 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (P) No 2 LEH
GE (I) (P) No 2 LEH C/O 56 APO PIN- 194101
CONSTRUCTION OF POL STORAGE AT GE (I) (P) NO-2 LEH
2021_MES_452390_7
GE(I) (P) NO-2/Leh-03/2021-22
Open Tender
Construction Works
Item Rate
180 days
LEH LADAKH
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (I) (P) No. 2 LEH
₹20,480
Yes
30 Aug 2022
25 May 2022
20 Jun 2022
25 May 2022
17 Jun 2022
3 Jun 2022
26 May 2022 - 2 Jun 2022
60 days
Amount
Excavation over areas n.exc 1.5m depth for foundation etc and getting out in hard/dense soil.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc and getting out in hard/dense soil.
PCC 1:4:8 type D2 (using 40mm graded crushed stone aggrregate) as in foundation, mass concrete.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Removing excavated material n exc. 50m and depositing where directed at a level not exc 1.5m above the starting point.
M&L for RCC M-30 (design mix) using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for RCC M-30 (design mix) using 20mm graded aggregate in Columns, pillars, piers, posts and struts.
M&L for RCC M-30 (design mix) using 20mm graded aggregate in beams , bressummers etc.
M&L for RCC M-30 (design mix) using 20mm graded aggregate in Slab supported on walls, beams and columns in floors, roofs etc.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Description all as per item No 10 above, but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders as in slab beam and column etc.
M&L for formwork to sides of fair faces concrete foundation, footing, bases of column and plinth beam etc.
M&L for formwork to sides of fair faces pillars, posts, struts, piers, columns and stanchions.
M&L for formwork to sides and soffits of fair faces floor or roof beam, lintel etc.
M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work complete all as specified and directed.
M&L for precast cement concrete block masonry (type B1 in 1:2:4 using 20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
M&L 10 mm thick plastering in cm 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement .
M&L 5 mm thick plastering in cm 1:3 on ceiling on fair faces of concrete surfaces finished even and smooth without using extra cement.
M&L 10 mm thick plastering in cm 1:6 on on fair faces of brick work or concrete surfaces as in skirting finished even and smooth without using extra cement.
M&L 15 mm thick plastering in cm 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.
M&L 10mm thick plastering in cm 1:4 mixed with water proofing compound @ 3% by weight of cement on roof surface complete all as specified and directed. Note:- Water proofing compound will be measured and paid separately.
Supply only water proofing compound Make:- Dr. Fixit/ Pidilite etc.
M&L Preparation of new plastered surface of walls and applying three coats of white wash.
M&L preparation of new plastered surface of wall and applying two coat of distemper oil emulsion on walls including Birla care putty filling on plastering surface complete all as specified and directed.
M&L preparation of new plastered surface of wall and applying three coats of white wash on ceiling.
M&L preparation of new plastered surface of wall and applying two coats of cement based paint including Chalk whiting, on plastered surface.
M&L 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in flooring finish even and smooth without using extra cement complete all as specified and directed.
M&L 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in flooring finish even and smooth without using extra cement complete all as specified and directed.
M&L 100 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in flooring finish even and smooth without using extra cement complete all as specified and directed.
M&L 3 mm thick glass dividing strips 38 mm wide and inserted in position to conform to design complete all as specified and directed.
M&L 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring etc complete all as specified and directed.
M&L screed bed or bedding layer of mortar 10 mm thick for laying floor finishes in cm 1:6
M&L non-skid ceramic coloured designer pattern tiles 400x400mmx7mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match complete all as specified and directed.
M&L glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement complete all as specified and directed.
M&L Hardcore broken stones or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M&L for 50 mm thick cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection joint filled with bitumen sand mix 50 mm thick finished even and smooth without using extra cement complete all as specified and directed.
S&F framed work as in doors or gate or cooler stand of angle or others section etc conforming to Fe 410-w complete all as specified and directed.
S&F for framed work such as on grills, gratings etc, with ends of bars welded, framed guard bars and similar work confirming to Fe-290, Gde E-165 complete all as specified and directed.
S&F 1 mm thick of lath Steel rolling shutters of Size 3.0 m x 2.72 m height RS-1 including gudding channels ,top hood, crack bar, shaft and all accessories without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual complete all as specified and directed.
S&F factory made steel window 1.25 mm thick box type (primer coated) using ERW hollow P section of size 60mm x 25mm single rebated comprises gauged skeleton shutter ERW section 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for Each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (e) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (f) Fabrication & fixing arrangement as per Drawing no CESZ/TD-1018/2011/1/1 to 1/3 complete all as specified and directed. Note: wire mesh and painting shall be measured & paid separately under appropriate item.
S&F steel ventilators fixed type with glazing bar complete all as specified and directed.
S&F Glavanised Mild steel wire cloth. 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvnaised wire staples complete all as specified and directed.
M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane.
M&L preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer on steel surface.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, including 30 mm thick sand cushioning complete all as specified and directed.
M&L point wiring complete with PVC insulated and unsheathed, flame retardant low smoke 1100 volt grade electric cable of 1.5 sqmm ( nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 19mm dia, and wall thickness 2mm, with suitable GI flush metal boxes ( not less than 2.0mm thick) of suitable sizes including earth dolly with 3.0 mm thick plastic laminated sheet top cover of approved colours including 1.5 sqmm PVC insulated & unsheathed flame retardent low smoke copper cable as continous earth wire with all accessories including lugs required, complete all as specified and directed for the One light / exhaust point controlled by one way switch 5 Amps.
Description all as per item No. 46 above but using 2.5 sqmm single core multi stranded copper conductor PVC Insulated and unsheathed , flame retardent low smoke ( FRLS) cable for 3/6 pin 15 Amps socket outlet controlled by one switch with and including 2.5 sqmm single core multi stranded copper conductor cable PVC insulated and unsheathed (FRLS) as continuous earth wire with lugs complete all as specified and directed. Note for item no 46 and 47: Proper colour coding shall be adopted for phase, neutral earth and halves.
S&F switch piano flush type single pole one way 5 amps, ISI marked complete all as specified and directed.
S&F Socket outlet 2 in 1 ,3 pin 5 & 15 amps flush type ISI marked complete all as specified and directed.
S&F Switch piano flush type, single pole, one way 15 amps, ISI marked, complete all as specified and directed.
S&F Ceiling rose 3 phase/ PVC/ polycorbonate as per relevant IS code ,ISI marked, isolated body complete all as specified and directed.
S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs fitted ACRYLIC window 240 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
S & F of isolator DP 32 amps complete all as specified and directed.
S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting complete all as specified and directed.
S & F of MCB SP 6 to 32 Amps (ISI Marked) 50 C/S 10 KA 'B' series complete all as specified.
S & F LED lamp 10 W for lamp Holder complete .
Supply laying & testing cableL XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with alimunium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core complete all as specified and directed.
SHUBHAM ENGINEERS & BUILDERS
NARINDER KUMAR SONS
M/s Aman Enterprises
osho traders
ASHOK KUMAR SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .