WELCOME MAINT OF QTRS INCLUDING B/R, E/M AND BS ITEMS AND REPAIR TO KITCHEN CABINETS, CUPBOARD, PARTITIONS, TOILET REPAIR AND OTHER MISC B/R WORKS TO OFFRS MD ACCN AT MANEKSHAW MARG, URBAN VILLAGE AND CASSEL ROAD IN THE AOR OF AGE B/R-I UNDER GE (EAS

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, disposal of debris to a distance not exc 250 mtr complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for 10 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, complete all as specified and directed .

Taking Down Cement plaster/duster bed PCC of column, chajja , paraphet of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 (average thickness of PCC 25 mm) as required brushing neat cement slurry wwith 3.0 kg of cement per sq metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surface

M & L for preparation of new surface including preparing of plastered or unplastered surfaces / concrete surface of wall etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed.

M&L preparation of new/old plastered surfaces of walls/ceilings and applying two coats of white wash on walls/ceilings complete all as specified and directed

M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls, pillers, cornices etc by washing , brooming & rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including removing the nails etc and cracks/holes in surface filling with white putty and sanding , surface free from dust , loose paint etc complete all as specified and directed.

Description all as per Srl Item 7.00 above but on celling suraface etc complete all as specified and directed.

M & L for applying for 1 mm average thickness wall care putty on internal wall/ceiling surface any type and sanding the putty surface thus prepairing surface even and smooth to recieve further finishes complete all as specified and all as directed.

M & L for applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush on internal wall/ceiling surface, complete all as specified and directed by Engineer-in-Charge.

M & L for applying one coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including applying with roller brush on internal wall/ceiling surface, complete all as specified and directed by Engineer-in-Charge.

M & L for applying two coats of oil bound distemper on internal wall/ceiling surface of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge.

M & L for applying one coats of oil bound distemper on internal wall/ceiling surface of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander machine etc and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush , complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.

M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.

Material and labour for Writing letters or figures (Block. Roman, Italic or Indian) not exc. 30 cm high ® PER 10 NOS complete all as specified and directed by Engineer-in-Charge.

Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.

Refixing doors shutters in same opening any description not exc 2.0 sqm complete all specified and directed.

Refixing doors shutters in same opening any description exc 2.0 sqm complete all specified and directed.

S&F Priaminated flush door shutter 30 mm thick solid core construction with Block board and laminated plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats

S&F Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm prelam coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & drawing

S & F anodised aluminium frame for doors, windows, ventilators, partations etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F anodised aluminium door shutters, poweder coiating of any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F Anodised aluminium window and ventilator shutters, poweder coiating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type with/without AC opening(with shutter) incl 3mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including frame/fittings complete all as per direction of Engr-in-charge. Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S & F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations , fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards , shelves, including tape on edge's & including frame work etc including taking down old any type cupboards , shelves etc all as specified and directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S & F in repair 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed.

S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt

S & F 100mm size butt hinges stainless steel complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 4 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 1 Sqm in each pane fixed complete all as specified and directed.

S & F 8 mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 2 Sqm in each pane fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

M&L for repair to existing steel rolling shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs complete all as spd and directed.

Providing services on related to welding & black smith work for reapir to steel windows, shutters , grills , doors , rolling shutters, and other steel works etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed. Note- (1).The above task shall be carried out by deploying minimum 01 welder having black smith skills on day basis From 900 hrs to 1700 Hrs. (2) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 500/- per day shall be deducted from his payment. (3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine , equipments and safety gear shall be provided by the contractor. (4) All replacement material/ accessories/Items as required shall be issued from MES store to complete the task and dismantled old unserviceable material shall be deposited to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs.

Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

M&L for Coloured Glazed ceramic tiles/ vitrified tiles in floor / wall , reapir in patches , area n. exc 5 sq.m. including taking down and removing and cleaning old tiles, preparing beds and laying or setting, jointing with matching new tiles with existing tiles over backing coat of 10mm thick rendering CM (1:4) as approved by Engr-in- Charge, complete all as specified and directed.

M&L for filling glass putty to old/existing window glass panes not exc 0.5 sqm each incl removal of old loose glass putty complete all as specified and directed. Note:- work will executed in multistorey building from external side and necessary T&P, scaffoling is included in Quoted rates

S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire tinned tacks or galvanized wire staple, steel windows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12 x 5 mm complete all as spd and directed. Note – (Removal of steel window incl refixing in the same location where necessary will also included in quoted rate)

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

M&L MS Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work .

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

S & F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

Stainless steel thali basket of size 370mm x 485mm x 200 mm made of min 4mm dia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mm dia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S & F aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws

S & F magnetic catches for cupboard , shelves, etc

S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders including end to end brakets fixed to wall etc complete all as specified and as directed.

S & F Aluminium alloy powder coated / stainless steel fancy type bracket with new screws for curtain rod complete all as specified and directed.

S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed

S&f 18"/20" telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed

S&F in repair aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom of door complete all as specified and directed

S & F Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M&L for two coats of oil emultion distemper on new plaster surfaces of wall over a coat of chalk whitening including prepration of surface complete.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed

M & L for Non-Skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick avg screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified coloued Ceramic tiles, light shade, 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer of mortar in Cm 1:6 complete all as specified and directed.

M&L for vitrified coloued Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36sqm,on vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over 10mm thick rendering in Cm 1:4 complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface as in dado 600X 300X 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for following:- (a) Dismantling of floor of Water closet,bathrooms and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges and comprising of followings:- (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fiber reinforced acrylic modified cementations coating system with base coat @ 1.50 Kg/Sqm, glass fiber reinforcement and acrylic modified cementations coating system top coat @ 1.50 Kg/Sqm (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound. (e) M&L for providing 25mm dia GI pipe light grade spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each WC portion is not exc 2.00 Sqm each.

M & L for 16 to 18 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F 20 mm bore CPVC pipe SDR 11 plain including plain CPVC SDR 11 fittings such as tee, elbow, socket, union etc. ISI marked and fixed complete to walls and ceiling or laid in floors/roofs, including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old any type tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed. complete all as specified and as directed.

S & F in repair 25 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S&F in repair 15mm angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. ( Make : Hindware /Jaquar and approved by GE)

S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed.

S&F in repairs brass chromium plated wall mixture 3 in 1 system with provision for hand shower and over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed.

S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed.

S&F in repairs 15mm dia 2 in 1 bib taps fancy type , CP brass, screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed.

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified (Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in Hindware/Parryware or equivalent make as per approved make list).

S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed.

S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repair Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed.

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified.

Supply and fixing in repairs Brass CP shower rose 100mm size any colour fixed to 15mm pipe of revolving type all as specified.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ®

S & F in reapir stainless steel 1.0mm thick, kitchen plate rack size 600mmm x 750 mm x 200 mm including fixing on wall etc

S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and as directed.

S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.

S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap , seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware)

S&F in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)

S & F in reapir Vitreous chinaware table top wash hand basin (WHB) of size 520mm x 360mm x 125mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., complete all as specified and as directed. (Make : Jaquar FLS - WHT-5931 and equivalent in Hindware/Parryware/cera as approved by GE)

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S&F of cabinet mirror of Prayag Cat Part No 551 or equivalent make complete all as per specifiacation & directed by Engineer-in-charge.

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in saft area upto the 10 story building also )

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc (to be measured separately) and making good the disturbed surface all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc complete all as directed

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

Description all as per Srl Item No 131.00 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S&F Modular Step Fan regulator, 120/70 watts single / double module, fixed in repairs, complete all as specifed and as directed.

Replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe, complete all as specified and as directed. Make: Usha/CG/V Gard/Khaitan/CR/Leader.

Replacement of LED Bollard Fittings 10W suitable for pathway lights including making electric connections, complete all as specified and as directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, Aluminium extruded heat sink with shatter proof opal shell of Aluminium housing, 10 Watts, cool/warm white as per site requirement, complete all as specified and as directed.

Taking down ceiling fan any size sealing cable end, dismentling blades and kept in MES store yard. complete all as specified and as directed.

Refixing Ceiling fan any type size complete with blades and accossories and provision of flexible cable from connector to ceiling rose complete all as specified and as directed

Taking down of geyser any type, size depositing to MES store yard complete all as specified and as directed.

Refixing of Geyser any type, size complete with, fastners, PVC Pipe including complete all as specified and as directed.

M & L in replacement of submain wiring complete with 2 x 4.0Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4Sqmm( same specification ) as earth wire in existing pvc conduit , connected with thimble from main DB to sub main DB complete all as directed.

M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard. (Make:Havells/ Usha/ Bajaj )

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as specified and as directed. (Make:Havells/ Usha/ Bajaj )

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 12 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F of MCB SPN B Curve type, 10 KA,63 Amp, with over load and short circuit protection complete all as directed.

Supply and fix in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

S & F in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt including LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as specified and as directed.

S&F Steel fastner of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

Supply and fixing of steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for hot and cold water from geyser and to withstand 8 bar pressure of water complete all as specified and as directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed. (Make:Havells/ Usha/ Bajaj )

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed. Make: Bajaj/ Crompton/ Havell's or equivalent.

S & F energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. Make: Bajaj/ Crompton/ Havell's or equivalent.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fix decorative Fancy wall light made up of high grade engineering plastic material suitable for 9 Watt LED lamp B22 bases. Make: Bajaj/ Crompton/ Havell's or equivalent.

Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items shall be done carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing every part in-tact, as applicable as per drgs. B) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(East) Delhi Cantt including BSO Furniture Yard as directed by Engineer-in-Charge

REPAIR TO BED PLYWOOD TOP (FD-246) Top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws complete, all as specified and shown in drawing and as directed by the Engineer-in-Charge.

ALL TYPES OF TABLE TOP Top 16 mm thick plywood BWP grade ISI marked (Make-Century ply"'Sainik 710/Greenply" Green gold/Archidply"/Platinum"/ Duroply/ titanium") with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancing white sunmica 0.8/1 mm thick with 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Replacement of cushion for seat & Back of sofa set 5 Seater Material and labour in replacement for cushion for seat & Back of sofa set, cushion shall be 22" x 21" x 100mm thick PU foam with 40 density (Make-Sleepwell (Model-Primo cool) / Kurlon (Model-Gold line or Gold line plus ) coverd with best quailty tapestry . Sample of tapestry cloth kept in BSO Yard, colour, shade and brand of cloths shall be approved by EIC/GE (Cost of cloth shall not be less than Rs 400/- per metre) complete with stiching and chain as per sample held with furniture yard

Replacement of cushion for seat & Back of sofa set 4 Seater Material and labour in replacement for cushion for seat & Back of sofa set, cushion shall be 22" x 21" x 100mm thick PU foam with 40 density (Make-Sleepwell (Model-Primo cool) / Kurlon (Model-Gold line or Gold line plus) coverd with best quailty tapestry . Sample of tapestry cloth kept in BSO Yard, colour, shade and brand of cloths shall be approved by EIC/GE (Cost of cloth shall not be less than Rs 400/- per metre) complete with stiching and chain as per sample held with furniture yard.

Painting and polishing : Material and labour for complete removing/scrubbing the entire old polished surfaces by gridining of the following items with grinding machine, including preparation of old wooden surfaces by applying seina/burnt seina uniformally and filing of cavities with putty/filler and applying one or more coat of french polish with as directed in order to obtain glossy finish to the to the entire satisfaction of Engr-in-Charge and all as directed.

Bed ply top (FD-246 & 247)

Sofa Set 5 Seater

Sofa Set 4 Seater

Chair Easy (FD-229)

Chair Dining (FD-228 & 279)

Chair Writing (FD-250 & 280)

Side board (FD-241& FD/E6/MAP/)

Table centre ( FD-274 & 235)

Table bed side (FD-248/276)

Table dining 06 person (FD-273, 239 & 376)

Table dining 08 person (FD-273, 239 & 376)

Hat stand with Mirror (FD-233)

Trolley for TV (FD/E6/MAP/)

Bin linen multipurpose (FD/E6/MAP/07)

Book case (FD-237)

Table dressing ladies with mirror (FD-32(M) & 251& FD/E6/MAP-II/07)

Table dressing gents with mirror (FD-31(M) & 230 FD /E6/MAP/16)

Chair verandah (Painting)

NOTE: (a) The work mentioned in above items shall be carried out including in multi storied buildings (G+8) which may require scaffolding or Jhulla arrangements or any other T&P items are included in the quoted rates by the contractor. (b) All debris obtained from demolition item shall be removed from the site at daily basis and remove the debris out of the MoD land. (c). Cleaning/washing and dusting of floor/wall/door/window/fittings and fixture to be carried out by contractor before handover the Qtrs (e). In case contractor fails to cleaning beffore handover the qtr a damage of Rs 1000/- per qtr shall be deducted from his payment.

BALRAM SETHI (BID ID -3502735)

Vee em Traders (BID ID -3496543)