SPECIAL REPAIR TO BLDG NO P-50 (SINGLE JCO LIVING) OF 102 INF BN (TA) PUNJAB AT MIL STN KALKA UNDER GE JUTOGH

Amount

Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed and serviceable bricks shall be kept aside for reuse and unserviceable bricks and debris shall be removed outside premises complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:6 complete all as specified and directed..

M & L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete for internal surface complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 finished even and smooth without using extra cement complete for complete all as specified and directed.

M&L For Rendering 5 mm thick on brick/concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of chalk white primer complete all as specified and directed.

M & L for preperation of new plastered surfaces wall applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M& L for preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from wall and applying two coats of oil bound distemper over a layer of wall care putty 3mm thick with a coat of primer suitable for oil bound distemper incl prepration of surface complete all as per specified and directed.

M & L for complete removal of existing treatment from wall and applying two coats of cement base paint complete all as per specified and directed.

M&L for preparation of old plastered surfaces and applying two coat of white wash on ceiling complete all as per specified and directed.

Dismantling, floor, hearth or wall tiling/terrazo toping including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed bed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and incl 15mm thick screed bed in CM 1:6 complete all as per specified and directed.

M&L for kota stone slabs, 16-18mm thick, machine cut as in skirting, set and jointed in cement slurry over & including rendering coat of 10 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab incl rubbing, cutting and polishing complete all as per specified and directed.

M & L for joint filling of existing Kota stone slab flooring including rubbing and polishing etc complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles on verticle surface such as skirting/ dado etc. 350X250X7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles fixed over and Incl 10 mm thick plastering in CM 1:4 complete all as specified and directed..

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) complete all as per specified and directed.

M &L for 75mm PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as per specified and directed.

M&L for chequered cement concrete tiles with grey pigment cement glossy finish 30cmx30cmx20-25mm thick, set jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and pigment laid over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M &L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down shutters of size n.exc 1 Sqm each of any description complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 75x60mm for door and window frames with double rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed.

S & F 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated of 2nd class hardwood rails and style for doors incl one shop coat of pink primer complete all as specified and directed.

S&F 35 mm thick factory made glazed & Skelton shutter of IInd class hard wood open rebated and prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I, complete all as specified and directed.

S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised,barrel tower bolts of extruded section.hinges complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

S&F 150mm, mild steel ordinary rat tail rod patttern door springs including roller and roller plate complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrunded sections and fixing bolt and sliding bolt of extrunded sections or cast aluminium alloy complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S& F 3 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or apeture 1.40mm and fixed with stainless steel wire staple in complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of syntheatic enammel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed.

Demolition of reinforced concrete of roofs, floors (other than ground floors) beams, staircases, lading, chhajas and similar suspended work complete all as specified and directed.

Use and waste of form work to chajjas and similar work for fair finish surfaces complete all as specified and directed.

M&L for RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in chajjas/ shelves/slab etc complete all as specified and directed.

M&L for mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for 25mm thick, louvers and jallies, casted with precast cement concrete 1:2:4, type B-0, using 12.5mm crushed stone aggregate set in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surface of roof finished even and smooth without using extra cement mixed with and incl water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

M&L for cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) M&L applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed (d) Applying one coat of bitumen 85/25 @1.2 kg/sqm complete all as directed. (e) Applying aluminium paint @ 0.20 kg/sqm complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site to store complete all as specified and directed.

S&F Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Refixing of Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. (Note: old tank obtained from dismantling shall be refixed)

S&F ball valve of brass, 20mm bore, high pressure with polythene float and fly nut , screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union s complete all as specified.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, complete all as specified and directed.

S&F GI tubing medium grade 20mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor complete all as specified and directed.

Re-fixing old steel tubing 20 mm dia and connections in new or old positions, complete all as specified and directed.

S&F in repair stop valves cast copper alloy with chromium plated screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified and directed.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union complete all as specified and directed.

S&F in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified and directed.

S&F in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified.

S&F in repair urinal flat back vitreous china (White), of size 465 x 365 x 265 mm with grating, union for discharge pipe, spreader & 40mm dia PVC waste pipe upto floor trap complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed.

S & F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socket,in any length with rubber ring joint, laid in trenches or in floor complete all as specified and directed.

S&F in repair 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F in repairs PVC(SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F in repairs PVC(SWR) bends, for 110mm bore pipes, complete all as specified and directed.

S&F in repairs stainless steel grating openable 100mm size with/without hole including fixing with white cement complete all as specified.

S&F 75mm bore PVC (SWR) pipe single socket,in any length with rubber ring joint, laid in trenches or in floor complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC(SWR) bends, for 75mm bore pipes, with access doors, complete all as specified and directed.

M&L for salt-glazed stone ware gully traps, 150x 150 square or round mouthed, type "p" setting and jointing to drains with CM 1:1 complete all as specified and directed.

S & F in repairs PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m deep along the existing sewage lines carefully for replacing/taking out SGSW pipe for puncturing of lines for cleaning and getting out in hard/dense soil complete all as specified and directed.

M&L for concrete bed of PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (SGSW/AC/PVC or re-inforced concrete pipe) set in cement mortar including concrete bed to drain pipes, complete all as specified and directed.

M&L for salt glazed stoneware drain pipes of 150mm bore, laid in trenches and jointed complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M&L for precast cover slab using RCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregates for man holes set in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets, chromium plated waste coupling, waste pipe etc., complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F Shelf of PTMT fixed with and including cp brass screws and wooden/plastic cleat (minimum wt-300gm) complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , complete all as specified and directed.

One light /fan/bell point controlled by one, switch complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

One bell point controlled by one push button switch complete all as specified and directed.

S & F switch piano type 240 V, 6 Amp , Sp one way flush type complete all as specified and directed.

S & F bell push 240 V, 5 Amp , Sp one way flush type complete all as specified and directed.

S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

M&L Fan regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete including with 9/10 Watt LED lamp complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

S&F MCB TPN 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SPN 32 to 40 Amps 250V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SP 6-32 Amp ,240 Volt incl all termnials, fitting etc. complete all as specified and directed.

M&L for replacement of call bell electric (ding dong type) , 240 Volt , single pole complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified

S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings complete all as specified and directed. Make :Havells cat part No RUGBYNEONFT10W LED 860SSYMTOPC/ Polycab Cat Part No. PLT0101316/ Crompton Cat Part No. LBH-10-CDL.

S&F in repair LED mirror light 10 watt with diffuser, decorative type with driver duly electrical connection from ceiling rose to fittings complete all as specified and directed. Make : Havells cat part No ENDURALINEARNEOBS10WLED865SPCWH/ Polycab Cat Part No. LDO0103021/ Crompton Cat Part No. LCL-10-CDL

S&F in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed. Make: Cormpton Greaves Cat Part No DMLN1LT8-16 and LTT8-20 or equivalent of C&S/Philips/Wipro/Havells.

S&F in replacement Energy saving LED Street Light Luminaries 45 watt fitting with driver having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V, including GI brackets with nuts and bots of suitable size ,making connection from ceiling rose to LED light fitting with suitable cable size for connection complete all as specified and directed. Make :-CROMPTON Cat no - LSTP-45-CDL/ Bajaj Cat No BRTFG 45W LED I/ Polycab Cat No PCGLS T1 45.

Supply, laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core , complete all as specifed and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50 mm dia confirming to IS , approved colour complete with fittings for cable protection complete all as specifed and directed.

m/s jupiter builders

R. P. Suppliers and Construction Co.