Upgradation and beautification road from Neelam Chowk to BK chowk with 60 M Wide ROW and 350 M Length, NIT, Faridabad and all other works contingent thereto.

`Supply of decorative lighting pole shall be 4 meters in height above ground level and manufactured from high-quality mild steel. The pole shall consist of three sections: a bottom section of 114 mm diameter and 1000 mm length, a middle section of 76 mm diameter and 2000 mm length, and an upper section of 60 mm diameter and 1000 mm length. It shall be provided with a decorative single-arm bracket of size 32 mm × 1000 mm × 400 mm hold 60W led Light of make Philips , Osram or equivalent light fixture of 60W shall be made of die cast aluminum and extruded aluminum hollow arms to join top part of fixture. The diffuser of fixture made of opal or textured UV stabilized PMMA. Light output of source is more than 110lm/ watt, CRI)80, SPD 10k, Pf).9, THD(=10%, operating voltage 140-270V. Fitting is IP66, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours, suitable for mounting outdoor lighting fixtures. Base plate size: 200X200X10mm thickness. The pole shall include an internal termination box complete with a 4-way connector and one 6 A MCB for local isolation. For corrosion protection and long service life, the pole shall be coated with a primary primer coat, followed by an epoxy resin coating, and finished with a UV-stabilized powder coating that is oven-cured. The decorative pole shall be suitable for outdoor lighting applications and shall be supplied complete in all respects with all necessary accessories, excluding foundation bolts.Make Jaguar, Havells, Transrail, Klite and VAK IS Approved make as per approval of Engineer-in-charge.

`Supply of decorative lighting pole shall be 9 meters in height above ground level and manufactured from high-quality mild steel. The pole shall consist of three sections: a bottom section of 140 mm diameter and 2000 mm length, a middle section of 76 mm diameter and 3000 mm length, and an upper section of 60 mm diameter and 4000 mm length. It shall be provided with a decorative double-arm bracket of size 38 mm × 1500 mm × 600 mm hold led light of 120W each of make Philips, Osram or equivalent, light fixture of 120W shall be made of die cast aluminum and extruded aluminum hollow arms to join top part of fixture. The diffuser of fixture made of opal or textured UV stabilized PMMA. Light output of source is more than 110lm/ watt, CRI)80, SPD 10k, Pf).9, THD(=10%, operating voltage 140-270V. Fitting is IP66, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours, suitable for mounting outdoor lighting fixtures. The pole shall include an internal termination box complete with a 4-way connector and one 6 A MCB for local isolation. For corrosion protection and long service life, the pole shall be coated with a primary primer coat, followed by an epoxy resin coating, and finished with a UV-stabilized powder coating that is oven-cured. The decorative pole shall be suitable for outdoor lighting applications and shall be supplied complete in all respects with all necessary accessories, excluding foundation bolts. Make Jaguar, Havells, Transrail, Klite and VAK IS Approved as per approval of Engineer-in-charge.

Supply and Erection of 415 volts 3 phase, 4 wire, outdoor type, IP 66, Astronomical Type, Microprocessor controlled, time of day sequencing, Auto/Manual type, Street light Panel comprising of 125 A, 4P-MCCB as incomer and 6 Nos. 63 Amps MCB outgoing , complete with internal wiring. Al. Bus Bars, Link sets of three 105/110 Amp (Ac 3 type) contractors, cable termination lugs for connecting incoming cables of 3.5x50 sq. mm. and 4x25 sq. mm. PVC Al. cable indication, Metering, support channels, rain sheds, complete in all respects of CRCA sheet of thickness 2.5 mm paint with PU. Make SPC Electrotech or Equivalent.