GES/PKT/80/2025-26 ADDN/ ALTN TO BLDG NO. NP-3 COOK HOUSE (OR) OF REGT, TOILET OF BLDGS NO. P-51, P-75 AND P-231 OF MDC, BLDG NO. NP-126 (LONG LIFE MEDICAL STORE) AND NP-127 (SHORT LIFE MEDICAL STORE) WITH FABRICATION WORK FOR PROVN OF COOL COMPARTME

Amount

M&L for PCC 1:4:8 type B-2 (using 40mm broken graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F in repair galvanized mild steel wire cloths 0.46mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanized wire staples complete all as specified and directed.

S&F sinks made of stainless steel w/o drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes pipe and waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 495mm x 395mm x 195mm complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single T equal or unequal) complete all as specified and directed.

S&F vitreous china wash hand basin oval shape any size including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in MS brackets complete all as specified.

S&F pedestal stand for wash hand basin of bowl size 550mmx400mm of matching colour of wash hand basin, complete all as specified and directed.

S&F stop valve 15 mm dia cast copper alloy fancy type, chromium plated with long shank and cup (concealed type) screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface, complete all as specified and directed.

M&L applying 1mm wall care putty on walls and make the surface of level, including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying min 1.0mm thick wall care putty on the surfaces and making surface smooth and applying one coat of primer (as per manufacturer's recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint as approved by Engr in charge all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. with Powder Coating (minimum thickness of powder coating 50 micron & min weight of member not less than 0.55 kg/Rm), complete all as specified and directed.

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed.

S&F Powder coated Anodised aluminium (min. thickness of power coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 no. minm), minm 3 nos aluminium tower bolt 75 mm long, aluminium handle 2nos 125mm, hinges type B-21 100mm long (2 no.) complete all as specified and directed.

S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F in repair for peg set of 5 Pin Stainless steel Grade, AISI 304, fancy type, superior quality with fixing arrangement complete all as specified & directed.

S& F for aluminium mortice lock, vertical tyle 75mm size of 4 lever all as specified and as directed by Engineer in Charge.

S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes including glass pin complete all as specified and directed.

S&F aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying one coat of oil bound distemper on ceiling, complete all as specified and directed.

Supply and fixing in repair for coloured vertical /Horizontal venetian blinds roll on type having minimum 75 width of strip complete with machine and all accessories fix to wall with screw all as specified, directed and sample Approved By Engr-In-Charge.

M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster).

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slabs, and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for cutting opening through brick wall for doors, window and other openings or enlarging existing openings, converting windows into door etc. or cutting out for defective brickwork including making plastering the damaged surface & making good and cleaning and stacking bricks, removing surplus serviceable bricks etc. to store and removing the rubbish not exceeding 50m complete all as specified as directed.

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, complete all as specified and directed.

M&L for steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Forming holes with riveted, bolted, or welded attachments, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/ dismantling old surface/tiles, complete all as specified and directed.

M&L 75mm thick plain cement concrete type D-2 1:4:8 as in Sub base/sub floor in tiles/blocks complete all as spd and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed

Providing & fixing 12mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles ofSize 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tmm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge, including Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry/ precast block walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed.

All as per description of serial item No. 39 here-in-above but except bricks complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

S&F prelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 Sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company. The sheet should be 100 % water proof, termite proof ,fire retardant, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness, complete all as specified and directed.

S & F continuous piano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed

S&F 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete

S&F magnetic door catches with sticking plate of standard size for cupboard/cabinet doors approved by GE as specified and directed.

S&F 100mm long stainless steel handle chromium plated fixed to cupboards, complete all as specified and directed.

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm long stainless stell barrel tower bolts of extruded section ISI marked, complete all as specified and directed.

S&F 150mm extruded stainless steel handle fabricated anodized ISI marked, complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked aluminium complete all as specified and directed including necessary welding if required .

S&F stainless steel sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and including PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and including PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site complete all as specified and directed.

M&L for providing glazed ceramic coloured wall tiles of size 600mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed.

M&L for providing glazed ceramic coloured wall tiles of size 450mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed.

M&L for vitrified tiles 10 mm thick (sq/ rect) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto any height and curing the surface, complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces of wall .all as specified and directed

M&L for rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas, ceiling and roof projection making the line in true shape finished even & smooth without using extra cement including scaffolding up to 7 meter height, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling, chajjas and roof projection and applying one coats of oil bound distemper, complete all as specified and directed.

Taking up or down GI pipe 20mm bore and connections, including cleaning for refixing or removal unserviceable pipe including S&F 20mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls, complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe including S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specified and directed.

Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed.

S&F in repairs 10 liters PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair stop valve/ angle valve (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type swan neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.

M&L for machine cut Kota stone, stone slab flooring 20-25mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed.

Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed. Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.

S&F in repair Hand Shower (Health Faucet) with 15 mm dia,1.25 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe of any size with all fittings complete all as specified and directed.

S&F 75mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed.

S&F of 110mm bore pipes, PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair complete all as specified and directed.

S&F of 75mm bore pipes, PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair complete all as specified and directed.

S&F in repair 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F in repair stainless steel Soap Dish fixed with and incl CP screws for bathroom with fixing arrangement complete all as specified and directed.

Demolition of Concrete of any description (reinforced) and in any position and M&L for RCC 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, balconies, canopies, deck slabs and in the shelves complete all as specified and directed..

M&L for form work to sides and soffits of slab, beams, columns, shelves etc. for rough finished surfaces of concrete complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed.

S&F 32mm bore corrugated PVC waste pipe, complete all as specified and directed.

M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed.

Supply and fix in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.

S&F welded steel wire fabric fixed to wood/ steel members fixed to frames at site (weight/ sqm not exc 4.00 kg/sqm) complete all as spd and directed.

M&L for reinforced cement concrete M-20 (Nominal mix) using 20mm crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over1.5m span complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, flat rough finished surfaces of concrete complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel including CP screws all as specified and directed.

S&F in repair CP towel ring PTMT fixed with and including Chromium plated brass screws and cleats (min wt 90 gms), complete all as specified and directed.

S&F in repair 5.5mm thick glass shelf 12cm wide with CP bracket guard and 60cm long CP railing including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges, complete all as specified and directed.

S&F Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size fixing with 225mm arm 15mm size to 15mm pipe with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair wall mixer for bathroom cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

Taking down distribution boards/wooden board ,switch fuse units, steel enclosures for MCB of any type and removing from site complete all as specified and directed.

Taking down existing unserviceable submain wiring of any size and making good the disturbed surface complete all as specified and directed.

M & L for modular point wiring for one light controlled by one switch 5 Amp, SP, one way 240 volts with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metallic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification.

All as per item No. 109.00 here-in-before but for One Ceiling/ Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts.

All as per item No. 109.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No. 109 here-in-before but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No 109.00 here-in-before but using 2.5 Sqmm (nominal area) multistranded copper conductor cable including 2.5 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one 6 pin socket outlet 16 Amps multi purpose on independent point complete all as specified and directed.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core, 4 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 4 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit 20 mm bore, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed.

M&L in replacement of Sub main wiring in two single run FRLS PVC insulated cable 6 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 6 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity complete all as spd and directed.

M&L for Modular switch piano flush type single pole one way 5/6 Amp 240 volts, complete all as specified and directed.

M&L for Modular switch piano flush button single pole one way 15/16 amps 240 Volts with polycarbonate body.

M&L for Modular socket out let, 6 pin 5/6 and 15/16 amps multi purpose 2 in 1 flush type, 240 volts with polycarbonate body.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked) complete all as specified and directed. .

S&F in replacement of MCB Protected Socket With sheet steel Enclosure single pole 20 Amp with 3 pin plug top for AC/ Geyser connection from Socket point to stabilizer complete all as specified and directed.

S&F lamp holder batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed by Engr-in-Charge.

Supply and fixing of LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer- in-Charge.

M&L for ceiling rose 2-3 terminal size 65x20mm, complete all as specified and directed.

Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with GI hexagonal adopters/Nuts on the both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge .

Supply and fixing of LED lights fitting 1x 20W,minimum 3.5 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing of 5 star rated BLDC ( Brush less direct current motor ) ceiling fan 230 volts, single phase of 1200 mm Sweep with regulator double ball bearing type with minimum air delivery 210 CFM & service value shall not less than 6.0 B.E.E including blade, down rod and canopy cover white colour etc. and including connecting 3 core flexible copper conductor cable complete all as specified and directed by Engr-in-Charge

S&F exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers and complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and complete all as specified and directed.

M & L for cutting hole in brick/stone masonry wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan all as spd and directed. Note : (i) Rates are deemed to be included to making the cutting hole smoothly and colour wash as per existing colour. (ii) Rates are deemed to be including charges of hiring T & P, i.e. ladder square folding and insurance of labour deployed, being holes are made to be at mutlistorey bldgs of different height .

S&F High performance IP66 LED Street light 20 watt, housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protection pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and directed.

S & F SPN 12 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed

S & F SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 to 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 63 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F MCCB TP 100 Amp 415V with breaking capacity 16KA fixed type suitable for VTPN DB complete with connection testing and commissioning complete all as specified and directed.

S & F VTPN DBs Double Door 4 way suitable for MCCB 3 pole incomer, IP 43 protection 415 V AC, 50 Hz AC appropriate size of bus bar and neutral link complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified

S&F GI tubing medium grade Galvanized of size 25 mm bore laid in trenches or ground/ in wall surfaces with all fitting including dismantling old unserviceable GI pipe, all as specified by Engr-in-Charge.

S&F GI tubing medium grade Galvanized of size 50 mm bore laid in trenches or ground/ in wall surfaces with all fitting including dismantling old unserviceable GI pipe, all as specified by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth in foundation, for laying of cables, pipes etc. and getting out in any type of soil complete all as specified and directed.

Removing surplus excavated material from site to a distance exceeding 100m but not exceeding 200 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

M&L for cutting existing GI/CI pipe line of size 50 mm dia pipe making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc with existing water line, complete all as specified and directed

M&L 50mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron and fixed in repairs complete all as specified and directed.

M&L 25mm dia Gun metal globe or gate valve with iron wheeled head, screwed both ends for iron and fixed in repairs complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 25 Sqmm 4 Core, complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 35 Sqmm 3.5 Core, complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 95 Sqmm 3.5 Core, complete all as specified and directed.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for earthing with steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of GI and GI strip protected by provision of GI medium grade pipe 40mm bore, 20mm dia GI medium grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion. NOTE :- Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and install 1.5 Ton capacity split AC, 5 star rated, invertor type, copper condenser, single phase 230 volt AC supply connecting indoor to outdoor unit with copper wire and two sized copper pipes, making necessary electric connection AC to plug socket and making good the disturbed surface with suitabe size of wall hanging stand for outdoor unit complete all as specified and directed by Engr-in-Charge.

Supply, installing, testing and commissioning of LT feeder pillar box factory made outdoor type, fabricated out of 3.00 mm thick CRCA sheet floor mounted with angle iron base frame made of 40 x 40 x 6mm, 50 cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415 V 3 Phase 4 wire, Square copper bus bar chamber 320 Amp capacity weather proof, with IP-54 protection with separate hinge door for each compartment for incoming and outgoing MCCB etc. with locking arrangement, with back door openable screwed, legs grouted in PCC including painting with two coats of epoxy powder paint over a coat of primer complete including supply fixing and making provision of the following :- (a) MCCB 4 Pole , 415 Volts 3 Phase 200 Amp, 415 V, 25 KA - 01 No (b) RYB LED indicator- one set (Set of three) Note : The panel shall be as per CPRI certificate.

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

Jay Ann Construction Company (BID ID -3522056)