Providing Furniture items to Inspection Bangalow (First Floor) at Central Zone Office in Ward No 83

Amount

Dismantling the existing damaged weathering course and pressed tiles as per the direction of departmental officers

Dismantling the existing damaged wall & Floor tiles in cement mortar with as per the direction of departmental officers

Dismantling the existing damaged cement concrete as per the direction of departmental officers

Dismantling the existing damaged Door & windows as per the direction of departmental officers

Scrapping the existing damaged plastered surface as per the direction of departmental officers

Dismantling the existing damaged Brickwork in cement mortar as per the direction of departmental officers

Dismantling existing damaged stones in cm as per the direction of departmetnal officers

Conveyance of Dismantled debris from work site to City outer with average lead of 15 km

Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Reinforced Cement concrete M20 Design mix using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.

fly ash Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification -

Supply and fixing of ms gate as per the direction of departmental officers

Supply and fixing of Architectural Carved exterior teak wood main door with frames using First quality Teak wood frames,leaves and casings including all types of trimmings, Brass Oxidized hinges, Tower bolt,Lock,Handle,Door stopper, with Door closer Teak wood surface is stained and finished in semi glossy melamine etc, complete as per standard specifications

Filling with well gravel layer by layer as per the direction of departmental officers

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Ceiling Plastering with cm 1:3,10mm thick as per the direction of departmental officers

Plastering with cm 1:5,12mm thick for all internal and external surfaces etc complete

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x6mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing the walls with Vetrified tiles of size 600 x 600 x 8mm thick laid in cement mortar 1:2 mix 10mm thick and pointing with white cement using 0.40 kg./cm2 including finishing the joint and pointing flush with tile surface etc

Painting with first quality emulsion paint two coats over priming coat including through cleaning, scrapping, removal of dust etc., completed.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supply of U-Pvc Casement Window at site by using with U-Pvc Profile JP 017 (58mm x 60mm 1.00 kg/m) for the outer frame .Total breadth is being divided equally in to two three or four openings (as per drawing).By using U-Pvc Profile JP 015 (78mm x 60mm 1.15 kg/m) for the shutters and the Mullion use U-Pvc Profile JP 019 (72mm x 60mm 1.20kg/m) and completed by fusion welding. All the shutters are fitted with 5mm clear glass with suitable U-Pvc glass bead. The windows are properly fitted with imported quality handles,SS 304 grade steel friction hings & Espengnett. use EPDM Material as gasket. All the profile are Reinforcement with 1.2mm GI Steel. Imported Anchor Fastners are being used to fix in the wall and fill with imported White sealant.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and run of 2 of 2.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point

Wiring with 2 x 1.5 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 5A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of LED Tube light fitting

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution boardwith double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only.

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only

Suppy of electrical materials

25A mcb AC plug

key Tag

63Amps ELCB

63Amps Fuse carrier

32mm GI service pipe set

Supply and clarnping of 4x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of Copper Refrigerant Piping of 7/8" dia etc complete

Supply and fixing of 30Watts 12x12 Led false Ceiling light fitting with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting ISI make

Supply and fixing of 22 Watts 8x8 Led false Ceiling light fitting with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting ISI make

Supply and fixing of 8 Watts 4x4 Led false Ceiling light fitting with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting ISI make

Supply and fixing Exhaust fan 230mm ISI make good quality

Supply and fixing of strip light to the false ceiling etc complete

Supply and clarnping of 4x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and installation air condioner with copper coil of 1.5 Ton split type Ac unit ISI make

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer ISI make

Supply and fixing of outdoor unit stand good quality

Supply and fixing of Wall Mounted Air Circulator - Wall 24" Fan with Double ball-bearing 900 oscillation Sturdy close-mesh guard beautifull design and Powerful heavy-duty motor . etc, complete as per standard specifications

European Water Closet (white ) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supply and fixing of European water closet (one piece closet) with Bowl With Cistern For Coupled WC With Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set , P trap and UF Soft Close Slim Seat Cover of size 375x650x800 mm mm with fittings and brackets dismantling and redoing the masonry work completely including all cost and conveyance etc complete.

Supply and fixing of half pedestal wall hung wash basin including cost of frames and fitting,dismantling and redoing the masonry work completely including all cost and conveyance etc complete

Supply of approved brand sanitary fittings and accessories including all cost etc complete

Angular Stop Cock with Wall Flange

Wall Mixer 3-in-1 System

Overhead Shower 100mm Round Shape

1/2" chrome finish brass pillar cock

Health Faucet) with 1 Meter Long

Single Towel Rail 600mm Long

Corner Glass Shelf (with Bracket)

Soap Dish Holder

Flooring with Ellis pattern using 6mm chips

Finishing the top of roof with one course of Solar Reflectance Index Cooling Terrace Tiles of size 25 cm X 25 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles, complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of SFRC man hole covers 600x600mm

Supply and fixing of PVC water Tank ISI make good quality

Supply of 200mm dia pvc pipe ISI make good quality etc complete

JAYALAKSHMI BUKDERS (BID ID -1361550)