Construction of outdoor stadium at ThanakalanSH Construction of Pavilion

Amount

Excavation in foundation and trenches etcetera in all classification of soil in dry or saturated condition up to any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separate as directed and then returning the stacked soil in 15 cm. (fifteen centimeters) layers when required into plinth sides of foundation etcetera consolidating each deposited layer by ramming and watering and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming and consolidating and dressing complete including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimetres) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work in foundation,footing of cloumns and mass concreteupto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five) thick welded with angle iron frame 30x30x5mm ( Thirty into thirty into five millimetre) size so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as Soffits of suspended floors,roofs,landings and the like floors etcetra up to any in thickness upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimeter) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeter) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies up to all height of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Case with sloping of stepped soffits excluding landing upto floor to all level including carriage of materials in all leads and lifts and other incidentials as per direction by the Engineer-in-Charge .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimetres) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work in Beams, cantilivers, girders and lintels sides and soffits of beams, beam in haunchingx, cantilevers, bressumers and lintles not exceeding 1 metre in depth in all height from floor upto all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimetres) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain in all floor level concrete work in columns, pillars, posts and struts, Square, rectangular or polygonal in plan including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimetres) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimetres) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and catering below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work in edges of slabs and breaks in all floor and walls for all width and depth upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per millimeter square) with minimum cement content of 330.00 kg( three hundred thirty kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced concrete work in foundation footings bases of columns and the like and mass concrete in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per millimeter square) with minimum cement content of 310.00 kg( three hundred ten kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced concrete work in suspended floors. roofs landings and shelves and their support balconies beams girders bresurmers and cantilevers upto floor two level in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per millimeter square) with minimum cement content of 310.00 kg( three hundred ten kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced for reinforced concrete work in stair case (except spiral stairs cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per millimeter square) with minimum cement content of 310.00 kg( three hundred ten kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced for reinforced concrete work in columns, pillers posts and struts upto floor two level in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing tor steel sail Tisco, Rinl Jindal Panther of (JSPL) Shyam Steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying ACC, L&T, Gujrat, Ambhuja, Vikram, Birla, JK cement, JP Rewa, Shrie, JK Lakshami, M/S Birarni Cement, Ultratech makes cement concrete 1:4:8 ( One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) mechanical mixed and curing complete excluding cost of form work in foundation and plinth as per the entire satisfaction and direction of Engineer-in-charge. Including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying ACC, L&T, Gujrat, Ambhuja, Vikram, Birla, JK cement, JP Rewa, Shrie, JK Lakshami, M/S Birarni Cement, Ultratech makes cement concrete 1:6:12 (One cement : six sand : twelve graded crushed stone aggregate 40mm (forty millimetres) nominal size mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Laying Second class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement : six sand) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Laying Second class brick work using common burnt clay building bricks in super structure upto all floor level in cement mortar 1:6 (one cement : six sand) up to all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Laying Second class half brick work using common burnt clay building bricks in plinth level in cement mortar 1:4 (one cement : four sand) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Second class half brick work using common burnt clay building bricks in super structure in up to all floor level cement mortar 1:4 (one cement : four sand) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying damp proof course with 38mm (Thirty eight millimeter) thick cement concrete 1:2:4 ( one cement : two coarse sand : four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete and HPPWD specifications as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials. .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Applying a coat of hot bitumen [mexphalt 80/100 (Eighty oblique Hundred) or equivalent] using 1.70kg ( One decimal seven zero kilogramme) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Cement concrete flooring 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetres) nominal size) 40mm thick (fourty millimetres) laid in one layer finished with a floating coat of neat cement including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Cement plaster skirting (upto 30cm height) (thirty centimeters ) height with cement mortar 1:3( one cement : three coarse sand) finished with a floting coat of neat cement including rounding of junctions with floor 20 mm thick (Twenth milimeters thick) including entire carriage of materials within all leads and lifts and other incidentials. .The rates ares are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

22mm thick checked tile laid in floor,treads of steps and landing on a bed of 25mm(Twenty five milimeters) thick with marble chips of specified size laid in flooring treads of steps and landing on a bed of 25mm(Twenty five milimeters) (AV) thickness of cement mortar 1:6 (one cement : six coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles. Wherever required including rubbing and polishing complete as required upto all floor level/height and HPPWD specificationsas per the entire satisfaction and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Precast terrazzo tiles 300×300×25mm(Three hundred into three hundred into twenty five millimeters) automatic hydraulic compressed and polished Terrazo tiles ISI marked No. IS1237 (50% (Fifty percent)White and 50%(Fifty percent) grey cement) in white, yellow, green and maroon chips of 0 and B size ( No. SG-403B of NTC or its equivalent as per approved shade 20 mm(Twenty milimeters) thick with marble chips of specified size) in skirting and cement mortar 1:3 (one cement : three coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete as required upto all floor level/ height and HPPWD specifications as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Precast terrazzo tiles hydraulic compressed 20 mm thick (with marble chips of specified sizes) fixed on wall on 10 mm thick cement plaster 1:3 (1 cement:3 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of following shades of Grey tiles including rubbing and polishing complete as required upto all floor level/ height and HPPWD specifications as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Precast terrazzo tiles hydraulic compressed 20 mm thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 10 mm thick cement plaster 1:3 (1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of following shades of GREY tiles including rubbing and polishing complete as required upto all floor level/ height and HPPWD specifications as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

White glazed tiles 200 mm X 300 mm X 6mm (two hundred millimetre into three hundred millimetre into six millimetre) thick in skirting risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointing with neat cement slurry up to floor all level. Kajaria, Ni To, Somang, Orient, RAK, Johnson and Johnson make. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses 0.63mm thick sheetwith all accessories as required complete upto all floor level/height as per HPPWD specifications,and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing plain corl red /Green shade flushing 60cms(sixty centimeter) overall with 0.63mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20(twenty) microns over 5 (five) micron primer coating plus back coat polyester of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks bolts nuts 8mm(eight milimeter) dia and prepainted GI limpet bitumen washer with all accessories as required complete upto all floor level/height as per HPPWD specifications,and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and fixing plain corl red /Green shade flushing 90cms(ninety centimeter) overall with 0.63mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20(twenty) microns over 5 (five) micron primer coating plus back coat polyester of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks bolts nuts8mm(eight milimeter) dia and prepainted GI limpet bitumen washer with all accessories as required complete upto all floor level/height as per HPPWD specifications,and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and fixing 0.60mm(zero point sixty millimeter) thick prepainted steel (TATA/SAIL)sheet in roofing puff roofing in cold red / Green shade made of colled rolled steel coil with epoxy coating of 25(twenty five) micron havinng a puff depth of 50mm (fifty millimeter) and weight of puff 35-37(thirty five - thirty seven) cubic meters including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia with prepainted limpet and rubber washers complete with all accessories as required complete in all respect.and HPPWD specifications approved design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet Tata make 1.66mm to 2mm (one point sixty six millimetre to two millimetre) thick in eaves board /facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely). including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, San Harvic, Steel man Industries, PD Industries, Metal window, Chandni industries, Ganpati udyog,(Rajpura) make including cutting hoisting fixing in position and applying a priming coat of red lead paint In trusses and trused purlins in buildings. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing tor steel sail Tisco, Rinl Jindal Panther of (JSPL) Shyam Steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 50mm dia M.S. Hollow pipe handrail slip resistance with round ends and two level at 75cm and 90cm weight welded TP 25 cm dia M.S Hollow pipes which shall be welded to be balusters it should extend 30 cm. beyond the top and bottom of the ramp as per detail (M.S.)set and balusters of railing shall be measured and paid separetely. Including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not les than 7.75 kg per sq.m to window frames etc. including 60x20 mm beading of 2nd class indian deodar wood Including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying upto first floor two level reinforced ACC, L&T, Gujrat, Ambhuja, Vikram, Birla, JK cement, JP Rewa, Shrie, JK Lakshami, M/S Birarni Cement, Ultratech makes cement concretecement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in :String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron (TATA /SAIL) door,window,clerestory window frame manufactured from M.S.Angle iron section of 50X50X6 mm ,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (thirty five milimeters) thick including black enamelled M.S. butt hinges flush door shutters core of block board of approved make construction with frame of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross band and face vaneers on one face and commercial ply veneering with vertical grains cross band on other face of shutters including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentials. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections San Harvic, Steel man Industries, PD Industries, Metal window, Chandni industries, Ganpati udyog,(Rajpura) make ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint Side hung windows including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentials. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections San Harvic, Steel man Industries, PD Industries, Metal window, Chandni industries, Ganpati udyog,(Rajpura) make ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint Top hung ventilators including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentials. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section San Harvic, Steel man Industries, PD Industries, Metal window, Chandni industries, Ganpati udyog,(Rajpura) make 25X25X5mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge. including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and fixing 1 mm thick M.S sheet sliding shutters with frame and diagonal braces or 40 mmx40mmx6 mm angle iron 3.15 mm M.S gusset plates at junctions and corners 25mm dia pulley, 40mm X40 mm X6mm angle and T.iron guide at the top and bottom respectively,including applying a priming coat of red lead paint. including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster ACC, L&T, Gujrat, Ambhuja, Vikram, Birla, JK cement, JP Rewa, Shrie, JK Lakshami, M/S Birarni Cement, Ultratech makes in Cement mortar 1:6 (one cement : Six sand) single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster ACC, L&T, Gujrat, Ambhuja, Vikram, Birla, JK cement, JP Rewa, Shrie, JK Lakshami, M/S Birarni Cement, Ultratech makes in Cement mortar 1:5 (one cement : five sand) single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying of Birla White Level Plast over prepared surface including grinding, chiselling, per-wetting, cleaning with wire brush to remove dirt, dust, grease oil etc. Level Plast to be mixed thoroughly with mechanical stirrer/ manually by adding 23 to 26 % (twenty three to twenty six percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application. coat thickness to be between 3-12mm (three to twelve millimetre) After cleaing the surface patch coat of level plast to be applied to celling to fill pores, honey combing areas using hand trowel. After complete drying of patch plaster finish coat of level plast applied with hand trowel and finishing the same with aluminium bottom. At the time of application applicator should wear hand gloves while using levelplast. Providing and applying 2 (two) coat of Birla white wall care Putty with a maximum thickness of 1 to 1.5mm (one to one point five millimetre) over base coat of Level plast including pre-wetting, cleaning of blade marks, removal of loose particle etc. WCP to be mixed thoroughly with mechanical stirrer/ manually by adding 35 to 40% (thirty five to forty percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application. Second coat to be applied after 2 to 3 (two to three) hours of complete drying of 1st coat and after rubbing with emery paper of size 500 (five hunderd) and above to remove the putty blade marks. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer (I.C.I.( Dulux gloss) Nerolec, Berger (Luxol High Gloss) Asian paint (Premium Apco lite Gloss) Shalimar make) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With readymixed paint other than white (I.C.I.( Dulux gloss) Nerolec, Berger (Luxol High Gloss) Asian paint (Premium Apco lite Gloss) Shalimar make) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing plinth protection 50mm(fifty milimeter) thick in cement concrete 1:3:6 (one cement : three coarse sand :six graded crushed stone aggregate 20mm(twenty milimeter) nominal size complete in all respect as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providsienpgaraatnedly. fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately).Orissa patern including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing 100 mm size 'P' or 'S' trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1(1 cement : 1 sand) sand cast iron, including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing 10.00 /12.50/15.00 litre ( Ten/twelve point fifty/fifteen Litre))vitreous China low level flushing cistern with a pair of C.I. or M.S. brackets complete with ball valve lead valve less syphon 15mm (fifteen milimeter)nominal size brass ball valve with polythene float C.P. brass handles unions and couplings for connection with inlet and outlet and over flow pipes 40mm (forty milimeter) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow) pipe to be measured and paid for separately. Low level cistern with dual flushing system No. 2603 of cera/Jaquar/Hindware make complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing Flat back 550mm x 400mm (five hunderd fifty into four hunderd millimetre) viterous China wash basin of Parryware, Hindware, Saintary ware, Neycer, Cera ware with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass nominal bore flush pipe / spraders for urinal with fittings such as unions, clamps etcetra (all in C.P. Brass) including cutting holes and making good the same. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) dia CP brass bib tap (heavy duty ISI marked IS:8931 & 8934) of Hindware or its equivalent with capstan head including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china Hindware Parryware, Saintary ware, Neycer, Cera wake) flat back or wall corner type lipped front urinal basin of 430 x 260mm x 350 and 340x430x265mm sizes, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required one urinal basin with 5 litres C.I. automatic flushing cistern, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china divison plate (Hindware Parryware, Saintary ware, Neycer, Cera wake) urinal size 700x340 mm (seven hunderd into three hunderd forty millimetre) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP angle cock 15mm dia. (Fifteen milimeters) dia of Cera/Jaguar /Hindware make complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing galvanised mild steel puff pipe 1m (one metre) long with brass perforated cap with 15mm (fifteen millimetre) dia including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass waste for wash basin or sink 32mm (thirty two milimeter) dia of cera/Jaquar/Hindware make complete in all respect.as per HPPWD specificationsand direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing C.P. brass towel rail 600x20 mm (six hunderd into twenty millimetre) (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors 100mm nominal diameter including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x 450mm (Six hundred into four hundred fifty milimeter) bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers. of cera /Jaquar/Hindware make complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing 600mm ×120mm(Six hundred into one hundred twenty milimeter) glass shelf with CP brass bracket and square rail complete fixed to wooden plugs with CP brass screws of cera/ Jaquar /Hindware make complete in all respect.as per HPPWD specifications,and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing110mm(one hundred ten milimeter) dia CP gatting of superior quality for floor, gully or Nalani Trap of cera /hindware or Jaguar make complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing 1000ltrs (One thousand litre) PVC water storage tank (Sintex made 4 layer)of ISI-12701 marked GI inlet or and outlet connections 15mm (Fifteen milimeter) nominal bore ball valve and mosquito proof PVC with locking arrangement including hoisting up to all height above ground level. complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing bras ball valve (horizontal plunger type) High pressure with polythene floats 15mm(Fifteen milimeter) nominal bore of Zindal/Tata make complete in all respect.as per HPPWD specifications and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing brass full way valve with wheel 15mm size (Fifteen milimeter) .of Zindal/Tata complete in all respect.as per HPPWD specificationsand direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and fixing M.I. Union for wash basin or sink 32mm dia of cera/Jaquar/Hindware make complete in all respect.as per HPPWD specificationsand direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government

Providing and laying in trenches B.S.T, Jindal (Hissar), Tata steel tubes Ltd. Parkash Surya make galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately) 20mm nominal bore. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing bath shower of Prayag make PTMT, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately 75mm nomunal size, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately 100mm nomunal size, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size), foundation concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate 40 mm (forty millimetre) nomonal size), inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete Inside size 800x800mm (eight hunderd into eight hunderd millimetre) and 500mm (five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern-I) 455x610 mm (four hunderd fifty five into six hunderd ten millimetre) internal diamensions total weight of cover and frame to be not less than 38 kg (thirty eight kilo gram) (weight of cover 23 kg. (twenty three kilo gram) and weight of frame 15 kg (fifteen kilo gram) ) with 200mm (two hunderd millimetre) thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of plain 75mm (seventy five millimetre) nominal size Sand cast iron / cast iron spun fitting & accessories,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of plain 100mm (one hunderd millimetre) nominal size Sand cast iron / cast iron spun fitting & accessories,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Sand cast iron / cast iron spun fitting & accessories Oval access door piece, with insertion rubber washer 3mm thick bolts and nuts complete with 75mm (seventy five millimetre nominal size,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Sand cast iron / cast iron spun fitting & accessories Oval access door piece, with insertion rubber washer 3mm thick bolts and nuts complete with 100mm (one hunderd millimetre) nominal size,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Sand cast iron / cast iron spun fitting & accessories Oval access door piece, with insertion rubber washer 3mm thick bolts and nuts complete with coller 75mm (seventy five millimetre) nominal size,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Sand cast iron / cast iron spun fitting & accessories Oval access door piece, with insertion rubber washer 3mm thick bolts and nuts complete with coller 100mm (one hunderd millimetre) nominal size,including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing lead caulked joints to sand cast iron / cast iron (spun) iron pipes fittings including testing of joints 75mm (seventy five millimetre) nominal size diametre. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing lead caulked joints to sand cast iron / cast iron (spun) iron pipes fittings including testing of joints 100mm (one hunderd millimetre) nominal size diametre. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Salochna Devi Govt Contractor