Construction of Baratghar Building Mohalla bim Nagar

Cleaning jungles including uprooting of rank vegetation, grass, bushes wood trees and saplings of girth up to 30 cm measured at a height of 1 metre above ground level and removal of rubbish up to a distance of 50 m outside the Periphery of area cleared.

Excavation in foundation in ordinary soil Loom clean or sand in cooling lift up to 1.50 M and lead up to 30 M and including feeling watering and rhyming of activated Earth into trenches or into the space between The building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer incharge up to distance of 30 M from the "foundation trenches.

Antitermite treatment of along external wall where the apron is not provided using chemical mulsion @ 7.5 L /sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and roading etc complete with chlorpyrifos/lindane E.C. 20°/» with 1% Concentration.

Providing and leaving cement concrete in 1:5:10 (1 cement 5 course sand 10 graded stone aggregate 40 mm nominal size) and curing complete including cost of formwork in foundation and floor.

Reinforced cement concrete work in walls (any thickness) including attached pilasters buttersses plinth and string courses fully columns pillars piers abutments post and struts etc including cost of centreing centreing finishing and excluding the reinforcement 1:1.5:3 (1cement :1.5 course send :3 aggregate 20 mm nominal size)

Class 150 (non modular) brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work.

Earth Work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in death and earth work in embankment to be in 20 cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30 M lead. the earth in form of cutting to be used as spoil banks within 50 M distance As directed by engineer in charge and 3 km cartage of Earth.

Send filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 km from the site of work and including watering dressing extra required for proper "completion of work.

Reinforced cement concrete work in beams lintels suspended roofs having balconies shelves chajjas bands staircase and spiral staircase above plinth level up to Floor 5 level including cost of centring shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement 1.5 coarse send and 3 grade stone aggregate 20 mm nominal size)

Class 150 (non modular) brick work in 1:6 cement and coarse sand mortar in uperstructure above plinth up to Floor 5 level including necessary cutting and moulding of brick work as required and also including any honeycombed brick work in thickness of wall more than 12 cm and including supply of all materials labour and T&P etc required for proper completion of the work.

Class 150 (non modular) brick work in 1:4 cement and coarse sand motor in foundation and plinth including supply of all materials labour and T&P etc. required for proper completion of work.

Class 150 (non modular) brick work in 1:4 cement and coarse sand motor in foundation and plinth 12 including supply of all materials labour and T&P etc. required for proper completion of work as per SI.no. 6.2.1

RCC work providing and laying in position specified grade of reinforced cement concrete. slab including the cost of centering shuttering finishing and excluding reinforcement above plinth level up to Sth floor level in 1:1.5:3 (1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size).

Mild steel aur iron work in clean work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of Steel and its wastage band hooks and anth thourized Overlapping shall we measured up to floor to level.

2 mm cement plaster with cement mortar in proportion of 1:6 cement and find sand (Dholpur sand) (not less than in 1.25 FM) of single coat of interior plastering up to floor two level including internal rounded angle chamfered and rounded angles not exceeding 80 mm in girth and finished even and smooth.

20 mm cement plaster 1:3 (1 cement 3 coarse sand) finished 16 with 3 mm thick floating Coat of Neet cement.

12 mm cement plaster with cement mortar in proportion of 1:4 cement and find sand (Dholpur sand) (not less than in 1.25 FM) of single coat of interior plastering up to floor two level ncluding internal rounded angle chamfered and rounded angles not exceeding 80 mm in girth and finished even and smooth.

Mild steel or iron work in heavy sizes such as built up gates record rack roof work Gates etc brought to required form including drilling holes riveting or welding where necessary and also including supply of Steel bolts nuts wastage etc. and their fixing required for proper completion of the work.

Supply and fixing of 32 mm flush doors commercial quality conforming to IS 2202 part 1 (1983) including ISI mark oxidised iron fitting with screws Bolt hinges handles sliding bolts door stopper and tower bolt etc.

Supply in fixing of 4.5 cm thick teak wood part panelled and part glazed Windows shutter including supply of wooden cleats and stops and induding fixing and adjustment of Hinges bolts locks handles springs and / or other fitting but excluding their supply and including painting with two quotes of black Japan on all iron fitting if necessary and including fixing the glass panel with putty and brad. glass to be 4mm thick. Fitting with necessary screws to be supplied departmentally.

Fixing of steel or wooden chaukhats in position door / Windows above 1.5 sqm and 5 sqm area as per SI. no. 11.14(A) UPPWDSOR

Fixing of steel or wooden chaukhats in position ventilators as per SI. no. 11.14OUPPWDSOR

Providing and laying vitrified tiles in floor with lean concrete of 600x600 mm size (thickness 10 mm) with water absorption less than 0.08°/o and confirming to is 15622 of approved brand and manufacturer in desired colour and shades laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS: 15477 including grouting of joints including preparation of 75 mm thick base with concrete 1:4:8 Cement course sand and 10 mm B/B complete as per engineer in charge.

Providing and fixing 18 mm thick granite gang saw cut mirror polished premoulded and pre polished machine cut for kitchen platforms vanity counter Windows sales PCS and similar locations of required size approved seed colour and texture lead over 20 mm thick base cement mortar 1:4 (1 cement :4 coarse sand) joint treated with white cement mixed with matching pigment Epoxy touch including dubbin caring moulding and polishing of edges to give high gloss finish etc complete at all levels.

Precast terrazzo tiles 20 mm thick with white black or white and black marble chips of size up to 6 mm laid in floors treads of a steps and landing on bed of 25 mm average thickness of cement mortar 1:3 (cement and coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with precast tiles of coloured with white cement.

Finishing walls with water proofing cement paint of approved makes such as supercem durocem robiance guttacem supercem quality and of required shade on undecorated wall surface (one coat) over and including one coat white cement primer to give an even shade after thoroughly brushing the surface.

Distempering with dry distemper of 27 approved brand two coats complete item.

Painting two coat and applying priming Coat over new steel and other metal surface up to 10 cm in width or girth or small not exceeding 0.10 sqm area after and including preparing the surface by thoroughly clearing oil Greece dust and other foreign matter and scoured with wire brushed, fine Steel/wood scraper send preparing and knotting including cost of all materials Labour T&P etc required for proper completion of work.

Painting two coat and applying priming Coat over new wood and other metal surface up to 10 cm in width or girth or small not exceeding 0.10 sqm area after and including preparing the surface by thoroughly clearing oil Greece dust and other foreign matter and scoured with wire brushed, fine Steel/wood scraper send preparing and knotting including cost of all materials Labour T&P etc required for proper completion of work.

Finishing wall with putty approve brand and manufacturer and of required shade on undecorated wall surface to give even shade over including curing and cost of all material labour T&P etc required for proper completion of work.

Cement concrete flooring in 1:2:4 (1 cement 2 coarse sand 4 graded stone of size 20 mm nominal size) laid in one layer finished with floating Coat of Neat cement 40 mm thick floor.

Providing and fixing of Glass strips of 4 mm thick in joints of floor and scarting at the time of laying including labour T&P etc complete in all respect.

Making grooves 10 to 12 mm wide and 8 mm deep in plaster of the wall or in ceiling vertically or horizontally as required.

Providing and laying 100mm th. Mud phaskaof damped brick earth on roof laid to slope consolidated with 25mm th mud mortar mixed with bhusa and grouted with cement mortar 1:3 cement and coarse sand mixed with aterproofing compound spreading cement slurry mixed with acrylic cement concrete waterproofing compound filled with gaps of coba and top of coba motor mixed with waterproofing compound in 1:4 cement and coarse sand mortar finish smooth and top mashed false 30 cm x 30 cm and side wall perapet shall be Monolithic plaster wall up to 30 cm higher and junction and comer shall we rounded by brick ballast cement and coarse sand masonry with top finished plaster mixed with acrylic water proofing compound @ 2% by weight and including supply of material labour T&P complete of work DSR Ch.No.12.16

Providing Gola 75 x 75 mm in cément mortar 1:2:4 (1 cement 2 coarse sand 4 stone aggregate 10 mm and down gauge) including finishing with cement motor 1:3 (1 cement 3 find sand) as per standard design in 75 x 75 mm deep chase.

Providing and laying ceramic glazed floor tiles of size 300 x 300 mm thickness to be specified by the manufacturer of first quality confirming to IS: 15622 of approve make in colours such as White ivory grey fume Red Brown laid on 20 mm thick cement Motor 1:4 (1 cement 4 coarse sand) jointing with Grey cement slurry @ 3.3 kg /sqm including pointing the joint with white cement and matching pigment etc complete.

Providing and fixing first quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours Shades accept burgundy bottle green black of any size as approved by engineer in charge in Skirting Risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement 3 coarse sand) jointing with grey cement slurry @ 3.3 kg per square metre including pointing in white cement mixed with pigment of matching shade complete.

Making khuras 45 x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement 2 coarse sand 4 grade stone aggregate of 20 mm nominal 38 size) over PVC sheet 1 m x1m x 400 Micron finished with 12 mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of Neat cement rounding the edges and making and finished the outlet complete.

Providing and fixing on wall face unplasticised rigid PVC rainwater pipes conforming to IS: 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion single socket pipes.

Providing and laying of cement concrete 1:2:4 (1 cement 2 coarse 40 sand 4 graded stone aggregate 20 mm nominal size) and curing complete including cost of form work.

Providing and fixing Water closet squatting pan (Indian type WC pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC flushing system including flush pipe manually controlled device (handle lever) confirming to IS: 7231 with all fitting And Fixtures complete including cutting and making good the walls and floors wherever required White vitreous China Orissa pattern WC pan of size 580 x 440 mm with integral type footrests.

Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 1 340x410x265 mm sizes respectively.

Providing and fixing 110mm diameter PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing 1 labour T&P and all complete fittings. As per si no. 43 UPPWDSOR

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard 1 board backing. Rectangular shape 453x357 mm.

C.P. brass towel rail 750x20mm together with pair of C.P. brass bracket to fit the towel rail.SI.N 32 UPPWDSOR

Providing and fixing C.P. Brass- stop Cock (concealed) of standard design and of approved make conforming to 1 IS:8931.(15 mm nominal bore) As per Si No. 18.52.1

Providing and fixing C.P. Brass Bib cock of approved quality conforming to IS:8931.(15 mm nominal bore) As per Si No.18.49.1

Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to 1 IS:8931.(15 mm nominal bore).

Providing and fixing 75mm diameter PVC pipe conforming to IS make working pressure 4 Kg/SqCm incuding testing 1 labour T&P and all complete fittings. As per si no. 42 UPPWDSOR

Providing and fixing 20mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps,including cutting and 1 making good the walls etc.

Providing and fixing 15mm dia" nominal bore G.I. Pipes complete with G.I. fittings and clamps, including cutting and 1 making good the walls etc.

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and 1 T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent.

Adding GST 18%

Please Enable Macros to View BoQ information