Construction of toilet facility and repairing the building at Helan Nagar Community Hall, Udhaya Marthandam Govt. High School and Midalam Women Self Help Group Library building

Dismantling and removal of R.R. masonry/brick masonry/plain cement concrete work, etc. upto 5m height and dumping the debris within a lead of 500m etc. complete as per the direction of Engineer-in-charge.

Dismantling and removal of RCC foundation/ column/ slab/beam, etc. in all heights upto 5m from floor level including all necessary scaffolding and dumping the debris within a lead of 500m etc., complete as per the direction of Engineer-in-charge.

Supplying, providing and laying solid block brick masonry in CM 1:6 using cement concrete solid blocks of minimum size 400*200*150mm for superstructure walls upto 4.5m height from ground level including mixing and conveyance charges and all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Dismantling and removal of floor (Ellis Pattern)/terrace finish/weathering course, etc. upto 5m height including neat cleaning and dumping the debris within a lead of 500m etc. complete as per the direction of Engineer-in-charge.

Earthwork excavation for foundation in all types of loose/hard soil and depositing the spoils with an initial lead of 20m and lift upto 2m including refilling etc., complete as per the direction of the Engineer-in-charge.

Supplying, providing and laying PCC 1:4:8 mix for foundation/flooring work using 40mm and below grade hard blue granite jelly including all form works, mixing, laying, compaction, consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying PCC 1:2:4 mix for foundation/ flooring work/kerb wall drainage wall using 20mm and below grade hard blue granite jelly including all form works, mixing, laying consolidation and curing, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing & laying RR masonry foundation/wall/retaining wall in cement mortar 1:6 for construction of wall using hard blue granite stone, etc. complete from 1m below ground level to 3m height above ground level with neat finishing including proper pointing & necessary scaffolding work etc complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying dry rubble masonry for soak pit for construction of wall using hard blue granite stone, etc. complete as per standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x 11.2x 7cm for foundation/kerb wall/wall upto 4.5m height from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, plastering with CM 1:3 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls upto 5m height with neat finishing and necessary grouting, necessary scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Sika/ Perma) for flooring work only, etc. complete complying with standard specifications and as directed by the Engineer-in-charge.

Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/Agni/JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works as per standard specification and as per the direction of Engineer-in-charge.

Supplying, providing and laying cement concrete 1:1.5:3 for RCC works using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering/shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge.

Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc. for floors & walls upto 5m height with neat finishing and necessary grouting, necessary scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Sika/Perma) for flooring work only, etc. complete complying with standard specifications and as directed by the Engineer-in-charge

Dismantling and removal of floor tiles/wall tiles/ granite/ damaged plastering surface, etc. upto 5m height from floor level and dumping the debris within a lead of 500m etc. complete as per the specification and as per the direction of Engineer-in-charge.

Supply of paints and painting two coat with emulsion paint (Asian/ Berger/ Nippon) 1st quality of approved shade over a coat of cement primer for the external/internal masonry surface upto 20m height and above from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying putty touch-up works wherever required, etc. complete as per specification and as per the direction of Engineer-in-charge.

Supply of paints and painting two coat with 1st quality enamel/touch wood paint of approved shade (Berger/Asian/Nippon) matching to the existing for all doors, windows, false ceiling, etc. including thorough cleaning and removal of dirt and applying wood sealer/primer and putty wherever required including necessary scaffolding arrangements, etc. complete as directed by the Engineer-in-charge

Supplying, providing and finishing the floor with Somania/ Kajaria/Qutone make Anti-skid ceramic tiles of size 300mm x 300mm of approved quality and shade in CM 1:3 – 10-15mm thick and pointing the tiles with matching colour cement, etc. complete as per the direction of the Engineer-in-charge.

Supplying, providing and laying with 10mm thick Matte Finish Marbonite double charge tiles of size 1200mmx 600mm Kajaria/ Somania /Qutone brand with Cement Mortar 1:2 and pointing including finishing the joint and pointing flush with the surface, etc. complete as per specification and as directed by Engineer-in-charge.

Supplying, providing, laying, dadoing the walls with Somania/Kajaria/Qutone make ceramic wall tiles of size 450mm x 300mm of approved quality and shade fixing with CM 1:2 – 10mm thick, etc. including neat cleaning, grouting and finishing with shaded colour joint filler etc. complete as per the direction of the Engineer-in-charge.

Supplying, providing and fixing Sintex make PVC door of size 750x2100mm including hinges, handle and locking arrangements, etc. complete as per specification and as per the directed by Engineer-in-charge.

Supplying, providing and fixing door of size 0.90x 2.10m consisting of heavy type 40mm G.I. square pipe (IS:4923) all-round, middle two horizontal 25mm G.I. square pipe, a middle vertical 25mm GI square pipe and top portion welded with vertical 25mm x 25mm GI hollow section of height 450mm & 125mm equal spacing. Bottom portion(below 450mm high 25x25mm GI hollow sections) covered with 2mm thick aluminium chequered sheet fixed with 25x5mm MS flat welded with outer frame on one side of Aluminium sheet including all supply and fixing MS kondy, locking arrangements and painting the gate with two coats of enamel paint over a coat of Zinc-chromate enamel yellow base primer, etc. complete as per specification and as directed by Engineer-in-charge. ( Thickness of all the GI pipe sections should be of 1.6mm and make : TATA/ JINDAL/ KALUNGA).

Supplying, providing and fixing RCC Jally of 600mm x 450mm size & 3inch (75mm) thick complete as per specification and as per the directed by Engineer-in-charge.

Supplying, providing and laying 20/25mm CPVC Astrol/Ashirvad pipes including all specials CPVC/brass such as bend, elbow, reducer, tee, solvent cement, MTA & FTA etc. complete as per the direction of Engineer-in-charge.

Supplying, providing and laying 20/25/32mm ID PVC finolex/Ashirvad/Astral super thick pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of Engineer-in-charge.

Supplying, providing and laying 40/50/63mm dia ID PVC finolex/ Ashirwad/ Astral super thick pipes including all specials such as bend, elbow, reducer, tee, solvent cement etc. complete as per the direction of Engineer-in-charge.

Supplying, providing and laying 110mm dia ID PVC finolex/Ashirwad/Astral (6Kg) pipes including all specials such as bend, elbow, reducer, tee, solvent cement, etc. complete as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP sanitary fittings: Parryware Bib cock as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP sanitary fittings: Parryware Pillar tap with necessary accessories as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP sanitary fittings: Parryware Push cock as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP sanitary fittings: Angle valve as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP & sanitary fittings: Parryware Wall Mounted Basin (Ultra White JOY Model No. C042B1C) with necessary accessories (waste coupling, waste hose, etc.) as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP & sanitary fittings: WHITE PARRYWARE URINAL - Niagara with spreader and waste pipe including suitable Azhirwad/Supreme/High count make PVC gully trap, urinal bracket, urinal cock, etc. as per the direction of Engineer-in-charge.

Supplying, providing and fixing the CP & sanitary fittings: Parryware Ceramic Sanitary ware Indian Toilet/Orissa Pan with required trap and Slim Flush Tank Combo Pack (Standard, White) (23 Inch Indian Toilet) etc.as per the direction of Engineer -in-charge.

Supplying, providing, laying and fixing electrification concealed (polythene pipe) point with required wire (make: Finolex/Havells/Polycab), switch box, switches (Make: Polycab/Havells) with all required necessary fittings including chipping, routing, clamping and all other incidental charges, etc. complete as per the specification and as per the direction of Engineer-in-charge.

Dismantling and removing of damaged roof sheet and side cladding fully/partly at all heights using proper tools and plants without damaging the adjacent structures, lowering carefully and stacking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding and safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge.

Supplying, providing, laying and-fixing A.C. corrugated/ Trafford (Everest/Ramco brand) roof sheet with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per sqm.) (Aargee associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including providing necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 15cm).

Supplying, providing and fixing AC ridges/AC corner ridges (Ramco/everest brand) with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per m) (Aargee Associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only), including edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 15cm).

Supplying, providing, hoisting and fixing of roof trusses including purlin, rafter, sleeves false rafter, base plate bracing and lacing, etc. fabricated out of G.I tubular square/rectangular heavy (C-class) pipes (purlin-1 1/2"; rafter - 1 1/2"; bracing -1") (TATA/Jindal) conforming to relevant I.S. code and providing G.I. tubular square/circular post heavy (C-class) (2.5"x2.5") (TATA/JINDAL) and proper welding with base plates and base fixing with concrete including painting with two coats of approved enamel paints (Asian/Berger/Nippon) over a coat of zinc chromate primer etc. complete. Over the roof truss fixing with 0.47mm thick powder coated sheet/ powder coated end curved sheet [TATA - Durashine /HINDALCO] (blue / red) with proper slopping, necessary ridges and drain arrangements, around side cladding and fixing 8mm dia G.I. polymer coated bolts & nuts (Aargee Associates/equivalent make), washer and bolt cap, necessary fittings etc., complete as per the direction of Engineer-in-charge.

Supplying, providing and fixing 500 ltrs. capacity Sintex water tank with all inlet and outlet pipe fitting arrangements and 20mm brass float valves, ball valve, etc., complete as per the direction of the Engineer-in-charge.

Engagement of Mason for miscellaneous works complete as directed by the Engineer-in-charge (Required materials will be issued by company on free of cost).

Engagement of labour (Mazdoor) for miscellaneous work complete as directed by the Engineer-in-charge. (Required materials will be issued by company on free of cost).

B&B Engineering Constructions

SPPS CONSTRUTCION INDIA PRIVTAE LIMITED

CIS GLOBAL INFRATECH PRIVATE LIMITED

SWANIP INFRACON PRIVATE LIMITED