ROAD SIDE PLANTATION INCLUDING ONE YEAR MAINTENANCE IN VARIOUS SCHEMES

Amount

Road side plantation in various scheme/non scheme including one year maintenance as per below details. 1. Digging of pits size 0.60x0.60x0.60 cm including removal of stones , manuring , application of insecticides and planting of healthy evenue plant like Neem, Sheesham, Amaltas, Kachnor, Gulmohar, Jacranda, Cordia etc. & watering atleast 15 litrs per plant after planting. Providing & Fixing the welded mesh tree guard as per following specifications: 1. Welded Mesh Size 25mmx25mmx10 gauge Height 6'-0" and dia 1'.6" 2. 3 Nos. flats rings of size 20mmx3mm welded at top middle and bottom of Tree Guard 3. 3 Nos. angle of size 25mmx3mm welded with middle ring of 4'.6" Length and Engel 4. 1 No. MS plate of size 10cm x 5cm x12mm thick fixed on top ring/tree guard for numbering detail 5. One coat of red oxide of approved brand should be done 6. Two coats of enamel paint as per direction should be done 7. Write the UIT & Sr. No. on MS plate as per direction by oil paint 8. Transportation of all Tree Guards for fixing as per direction should be done on his own cost 9. All work should be done as per direction of in charge up to fully satisfaction 10. Tree Guard should be fixed properly in CC 1:1.5:3 Maintenance of plants upto one year by the contractor including of pits/bids watering preparation of Thavala Hoeing weeding etc. & application of insecticieds etc. & security if the plant die during maintenance contractor has to replace same height plant at his own cost.

Providing welded mesh tree guard as per following specification 1. Welded Mesh Size 25mmx25mmx10 gauge Height 6'-0" and dia 1'.6" 2. 3 Nos. flats rings of size 20mmx3mm welded at top middle and bottom of Tree Guard 3. 3 Nos. angle of size 25mmx3mm welded with middle ring of 4'.6" Length and Engel 4. 1 No. MS plate of size 10cm x 5cm x12mm thick fixed on top ring/tree guard for numbering detail 5.One coat of red oxide of approved brand should be done 6. Two coats of enamel paint as per direction should be done 7. Write the UIT & Sr. No. on MS plate as per direction by oil paint 8. Transportation of all Tree Guards as per direction should be done on his own cost 9. All work should be done as per direction of in charge up to fully satisfaction

Providing HDPE NET tree guard as per following specification Width 1200mm Length 1830 mm All joint Thickness 6mm Regular Filament Thickness- Horizontally 3.5mm Regular Filament Thickness- Vertically 3.5mm All Reinforcement thick filament (two bars) Thickness Min. 3.5 mm Regular mesh gap should not more than 45mm x 55mm All Reinforcement thick filament Mesh Gape should not more than 20mm x55mm Reinforcement thick filament (two bars) shall be placed at - Horizontally Min 3 Place in sheet/pcs Reinforcement thick filament (two bars) shall be placed at - Vertically Min 4 Place in sheet/pcs Wight of the sheet or per not (1200mm x 1830mm) 1.00 Kg (Tolerance5%) Nos of cable tie or locks in black color with min 100 mm length 15-18 Nos

M/S KRISHNA CONSTRUCTION