S&T work in c/w (1) Repl. of steel girder with RCC slab of Bridge No.102 UP&DN, 111 UP&DN, 119 UP on JUC-ASR sec., B.no.180 on ASR-ATT & br. no.103 on VKA- DBNK section. (ii) Construction of LHS of internal size 5 m X 3.5 m LHS in lieu of LC C-7 at KM 4/13-14 on JUC-NRO section under ADEN-JUC over firozpur division. (iii) Construction of LHS of internal size 5.0 X 5.0m at manned L-xings No.A-5 on VKA- DBNK section by pushing method in the section under ADEN-I/ASR. (iv) Construction of RCC box (2 nos. twin boxes) bridge in lieu of steel trough bridge no.158 in PHR-LNK section.

Description:- Supply of Electric point machine IRS type, Non-trailable type, 220 mm. throw and clamp point lock 60Kg, rated voltage 110V DC (Thick web switch point machine), internal locking

a min. AC immunity level of 160 V (r.m.s), 50 Hz. It must contain ground connections including all type of insulation, crank handle, clamp lock etc. as per drawing no. RDSO/S-11000, RDSO/S-3395 & RDSO spec. no. IRS: S 24-2025 Rev. 3.0 or latest if any. (Inspection: RDSO for Point machine & Ground connections and accessories by Consignee)

RDSO/SPN/208/2012 Ver 2.0 with Amendment-1 or latest with four Limit Switches including Dual Limit switch for Boom Lock Proving/closing as per new Design of Make: Global. (Inspection: RDSO)

Make- Exide or similar. (Inspection: RDSO)

Description:- Supply of complete set of point rodding (Ground connection including clamp locking

specification IRS: S 24-2025 Rev. 3.0 or latest and as per drg. No. RDSO/S-11000 and RDSO/S-3395 or latest as applicable. (coal Bangal for smithy work, all type of nuts & bolts and Lugs as required also to be supplied with each set).(Inspection: Consignee)

FEROZPUR DIVISION-S AND T/NORTHERN RLY

8800-01(Adv.) or latest complete consisting of insulation rail joint splice plate - 01 No. to drg. no. S-

as per spcn. no. IRS:S-40/84 material nylon type-66, washer - 04 Nos. to RDSO drg. no. T-10371 ALT-

Description:- Supply of Insulation for 'P' bracket for point fitting IRS type complete consisting of Rail Joint splice Plate for 'P' bracket LH side - 01 No. as per RDSO Drg. no. S-3266 Nylon Type -66 as

No. as per RDSO Drg. no. S-3265 Nylon Type -66 as per IRS-S-40/84 with latest amendment, Bush for 'P' bracket -04 Nos. to Drg No. S-23199 as per spcn. IRS:s- 40/84 material Nylon Type, Insulating washer for insulated 'P' bracket -04 Nos. to RDSO Drg. no. S-8640 as per spcn. no. IRS-S-40/84 nylon type-66.(Inspected by Consignee)

or latest and RDSO Drg. Nos. T-10367, T-10368 & T-10371 with latest amendments complete with nut bolts etc. (Inspection: Consignee)

RDSO drg. no. SA-23741A(Alt 4) & spec. no. IRS-S-75/2006 or latest as applicable. (Inspection: RDSO)

per RDSO Drg. no. RDSO/S-11500 or latest. (Inspection: Consignee)

Adjustable, Heavy Duty PP Base, DIY Installation Make: Godrej Model No.9u02r Bravo Or Similar of reputed brand. Inspection: Consignee

Description:- Supply of Floor mount Solid Engineered Wood Alston 2 Door Large File Cabinet with

Centimeters. Durable, Lockable, Multipurpose, Space Saving, Sturdy. (Balliness Pine & Cloud Ash Finish or as desired by Engineer in-charge of work) Inspection: Consignee.

mm size for drilling precise holes in rails or other. (Inspection: Consignee)

LED signal or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO)

LED signal or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO)

Siemens (Inspection: RDSO)

signal type or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO)

RDSO/S-11600 or latest. The material will be as per RDSO Specn. No. RDSO/SPN /208/2012/Ver.2.0 and Amendment 1 or latest. (Inspection: RDSO)

Long Backup & Low Maintenance | Leak Resistant | 36 Months Warranty. Model: Exide XP 1500 or better. (Inspection: RITES)

Stick Functions, Arc Force Control - 2 Year Warranty portable welding machine. Brand: iBELL M250-

FEROZPUR DIVISION-S AND T/NORTHERN RLY S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-Supply and execution items 2138212.50

Description:- Boring & trenchless, cabling along with supply and insertion of Double walled corrugated HDPE ducts as per RDSO spec. no. RDSO/SPN/SPN/204/2011 ver.1.1 and amendment 1

signaling/telecom/power cables under the track/road. The following required coupling arrangement should also be supplied: 1. Suitable snap fit couplers with rubber O ring 2. Spacers 3. Tees 4. Bend 5. End cap etc. to be supplied along with the pipe. Work at site shall be inspected by Site engineer & DWC HDPE pipe and associated material to be inspected by Consignee.

NR/S&T/CON/1.1/97-A and as per instructions of the site Engineer. (Bricks to be inspected by Consignee).

Description:- Supply and installation of earth electrodes pipe of 3 mtrs length and 50 mm dia. pointed on lower end by tapering for a length of 150 mm and connecting with lightening arrester or signaling gears as per std. Practice. The item includes digging of pit in earth, 3 Mtrs. Deep and fixing earth electrode pipe in it. Earth pipe shall be buried in the ground to the length of 2.7 mtrs. after welding 6 SWG wire at lower end and fixing through nut and bolt at top. Casting of cement of Cement concrete enclosures as per drg. No. NR/S&T/CON/6.4/97 or latest if any. The soil treatment

soldering of lead wires. The other end of the earth wire/mild steel flat to be connected to block instrument mild steel flat, cable sheath of power equipment , apparatus case, relay racks, other equipments as per the instruction of Engineer at site & IRSEM. Complete materials such as earth electrodes as per drg. No. NR/S&T/CON/6.3/97, cement, wiring material, soldering material, mild steel flat, soldering of lead wires etc. to be supplied by the contractor. The earthing lead shall be mild steel flat of size 35mmX6mm. In case conductor is buried underground, it shall be protected from corrosion by application of suitable anti-corrosive paint.(Material inspection: Consignee)

Description:- Supply, fabrication and installation of Water proof Galvanized Main Cover Assembly complete spare for Point Machine comprising of Main cover, Crank Handle Hole Sub assembly, KEY HOLE LOCK SUB. ASSY, DOOR LOCK, RUBBER GASKET of MAIN COVER ASSY, Rubber GASKET (C.H. HOLE LOCK ASSY.), CRANK HANDLE HOLE LOCK BASE, Crank Handle Hole Lock Lid, PIN (for C.H. HOLE LOCK Sub assembly), Rubber Gasket (C.H. HOLE LOCK ASSY. LOCKING CAM, KEY code 856051010-s along with Fixing material to trap accumulated air as per Drg. no R-ST-12161,

and rewiring of point machine with contractor's own material. Thickness of cover material: - 2mm, galvanized and power coating shall be done on cover. List of material to be provided in one set as following (1) I bolt M12 X 150 SS 304 - Qty 3 nos. (2) Wing nut for the above - Qty 3 nos. (3) Flat Washer 3 X 13 X 40 SS 304 - Qty 3 nos. (4) Flat Washer 2 X 13 X 25 SS 304 - Qty 3 nos. (5) Spring washer 2 X 143 X 20 SS 304 - Qty 3 nos. (6) Heat Shrinkable Sleeve 6mm, 14mm, 15mm (7) Aldrop - Qty. 1 no (8) Lock - Qty. 1 no. (9) Body Wall Clamp - Qty 3 nos. (10) Wall clamp fitting nut set - Qty 8 nos. (Inspection by Consignee).

Description:- Supply & installation of De-ionized water plant (Membrane based). Technical specifications for water plant are as follows: - 1. Discharge of water (purified) - 10-15 Litre/Hour 2. Accepted TDS - 0-5 ppm (mg/Litre) with zero Hardness. 3. Accepted pH - 6.5 to 7.2 4. Total output of water in one Installation - 15000-20000 Litre. 5. Specific electrical conductivity at 25C - 0 to 5.0 (Max) micro mhos per cm. 6. Mounting Type - Wall hanging in a Mild steel (Powder coated) cabinet

demand for one year from installation date. 10. Display Feature - Online TDS meter is required in cabinet which displays the TDS of discharge water from De-ionized water plant. It also includes the supply of a storage tank of capacity of 200 litre with the plant of reputed make only and one spare TDS meter is to be provided with each set. The switching of plant should be automatic, on filling of tank it will shutdown. It also includes supply of all the necessary items for making the plant functional. (Inspection- Consignee)

workstation table (per seat). Rectangular with pinboard along with seating arrangement, intal beech color or as desired by site engineer. (Inspection: Consignee)

by Site engineer. Electrolyte shall be prepared as per IS 266 (Acid) and IS 1069 (Distilled water) or latest. (Inspection: Consignee) FEROZPUR DIVISION-S AND T/NORTHERN RLY S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () D-Execution items 304642.80

Description:- Replacement Charges of Old Locking with new Locking. This includes foundation, installation & testing of lock post including excavation & casting of foundation of 1:3:6 for boom rest with contractor's own material including cement, anchor bolts, installation of boom locking devices,

wiring and other outdoor Works etc if required. All materials required for installation & wiring shall be supplied by the contractor. Entire work shall be caried out in accordance with the RDSO Spec. RDSO/SPN/208/2012 Ver.2.0 and Amendment 1 or latest, latest TAN no. STS/E/TAN/3030 Ver. 1.0 dated 02/02/2026 or latest. (Inspection: Consignee)

Description:- Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as per drg. No. NR/S&T/CON/1.1/97-A or latest so as not to form a drain 0.3 Mtrs. Wide & 1 Mtr.

signalling and cable plan. It also includes clearance of routes of trees & bushes. Lesser depth due to site conditions shall be paid proportionately after obtaining prior approval from not below than JAG officer.(Inspection: Site Engineer)

Description:- Laying of signalling/telecom/power cables by unwinding cables from drums of

the Railways. It includes Meggering of cable before and after its laying of all types of cables. Meggering to be done for each drum separately. Meggering sheets to be supplied and filled up by contractor and submitted to Railways. (Inspection: Site engineer)

Description:- Fixing, wiring, testing & adjustment of electrical point machine TWS high thrust per standard practice. This also also includes: (i) complete material for installation of point machine and fixing of ground connection/ switch extension P/D bracket insulator materials, Spipe, wiring materials, various nuts and bolts including casting NUTs and spring washer etc., adjusting the correct opening of switches and adjusting the point machine with crank handle. (ii) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction box/hut as per NR practice and instruction of site engineer. (iii) Supply & Fixing of GI pipes with flange for taking

point insulation material, GI Pipe/gland pipe, wiring material, nut & bolts of various sizes, MS channels 2 Nos. of length(350*125*50 mm) etc. as per site requirement for fixing the machine ,lugs for the point rodding and insulation material for the stretcher bar 90R/52kg/60kg as per RDSO Drg. no. SA-23171 (Adv.) Alt. 1,SA-23172 (Adv.) Alt. 1 will be supplied by the contractor (v) Smithy and fitting work required at site for complete installation, installation of gauge tie plate and insulation of GTP as per Drg. No.NR/S&T/CON/7.6/97 and william stretcher bar(if required) will be done by the contractor .Also Machine will be overhauled by the contractor if required. (vi) This includes removal of existing gears and fixing the machine at raised level on channel as per standard practice to avoid flooding wherever required. (Inspection: Site Engineer)

Description:- Casting, concreting and curing of foundation and erection of Apparatus Cases Large

anchor bolts shall be supplied by the contractor. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. All concrete work must be ratio of cement, coarse sand and aggregate 1:3:6. (Inspection: Site Engineer)

Description:- Preparation of Apparatus Case Large not involving wiring of relays. This involves following: Preparation & fixing of Bakelite hylum sheet 910x800x6mm and teak wooden shelf 900mm x 450mm x 25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mm x 25mm x 3mm. Angle iron frame will be fixed in location boxes secured by nuts & bolts. Fixing of fuses, ARA terminal shelf type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable

location boxes, location huts, JB's relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. Painting from outside as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn., non-deteriorating type HRC fuses, bases, nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the railways. (Inspection: Site Engineer) FEROZPUR DIVISION-S AND T/NORTHERN RLY