CWE/P-12/2023-24

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Add to last item for every 3 cm or part there of above 15 cm average depth, complete all as specified and directed. Note :- Same rate shall apply in case of reduction in depth by 3 cm or part thereof.

Removing excavated material to a distance not exceeding 50 metre and depositing whre directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M&L rolling and consolidation formation surface in cutting using power roller exceeding 8 tonne and not exceeding 12 tonne, complete all as specified and directed.

M & L for soiling (or sub base) 150 mm thick (spread thickness) with broken boulder or quarried stone, surfaces formed and rolled and consolidated to required gradient and camber, with lime stone or sand stone, complete all as specified and directed.

Material and labour for 150 mm thick in two layers 75 mm each (compacted thickness) WBM with coarse aggregates of limestone, sand stone, Flint or Quartzite stone of grading 2 (63 to 40mm size) or 3 (50 to 20mm size), spread, rolled and consolidated to gradient and required with lime stone or sand stone, complete all as specified and directed.

Material and labour for preparing unsurfaced water bound macadum surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air pressure to remove all loose dirt etc and applying evenly priming/tack coat with bituminous primer (paving bitumen) (VG-10) Viscocity Grade -10 @ 10 Kg per 10 Sqm of road surfaces and providing for bituminous premixed asphaltic semi dense concrete, 40 mm thick (consolidated thickness) with 5.5% binder content of paving bitumen VG-30 by weight of total mix, by using self propelled mechanical paver, rolled and compacted to required smooth surrface, camber and gradient, complete all as specified and directed.

M&L for continuous brick edging with old size bricks with width equal to width of brick, laid dry on edge vertically, complete all as specified and directed.

M&L for painting lines, dashes arrows, letters etc on roads , pavement and the like using thermoplastic paint 2mm thick with glass beads @125 grams/Sqm using special applicator machine with heating arrangemen upto 160 C exc 10 cm wide white/black or golden yellow until desired result is obtained complete all as specified and directed by Engineer-in-charge.

S&F of Solar road delineator 3 LEDs colour red/yellow housed in plastic body LEDs, solar-cells battery and light sensor well protected inside polycarbonate sheet device proctected with power coated wire mesh cage. System mounted over 47mm dia steel tube powder coated of length 600mm having sheet foot for firm grip to ground Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge of 8 to 10 hours, complete all as specified and directed.

Supply and fixing solar cat eye alunimum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consitig of super bright LED with 10,000 to 18,000 mcd complete all as per manufactures instructions and all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

Sandeep Kumar

M/s Trade Linker Associates