ward no. 07 me sector K me Sai Baba mandir ke pichhe wale park (open space me) vibhinn civil marmmat evm logo ke vyayam ke liye gym sthapna evm khel upkaran ka karya (vidhayak kosh)

Amount

(G Schedule Amount) Please Fill BOQ2 Total Amount

(H Schedule Amount) Please Fill BOQ3 Total Amount

Bidder Name

Amount

MS MADRAS CONSTRUCTION (GSTN-08CADPM7161H1ZH) BID ID -3130314

Description of Work / Item(s)

Amount

Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement. POMMELO HORSE • DIMENSIONS: - 2150mm (Length) x 800mm (Width) x 800mm. (Height). • SAFE AREA: - 5Mtr x 3.5Mtr. • Pommel horse equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame of 80NB and 50NB made from “C” Class G.I. pipe. • The handle frame is of 32NB made from “C” Class G.I. pipe. • 40mm x 40mm CRC square pipes frame is placed on the 25mm x 25mm x3mm M.S. L Angle with 60 x 10m thickness flat is used for support. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • High tensile steel with galvanized nuts and bolts are used for assembly. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to70 micron thickness.

Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement.CHEST CUM SEATED PULLER:-• DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of “C” Class G.I. pipe. • The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. • The connecting pipes are made up from 25NB “C” class G.I. pipe. • The handle frame is made up from 32NB “C” class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for locking is made up of A24 & A16 • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints

Standarad See- Saw Roto Seat :- Rotation molded seats of thickness 60mm are used in these see-saw, it has been provided with bolts to fix it too see-saw frame which has a plates of 200x150x5 welded on to the frame. Handle has been provided on the frame made up of 20 NB pipe and also conforming to EN standards. Frame :- Frame of standard see - saw is designed using 15 NB 20NB & 25 NB G.I. pipe and it has been given radius by suitable bending techniques. Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangment. Standard see saw clamp is used in FRP see saw so as to provide required motion for the see saw. Tyre :- Tyre is used in FRP see saw to avoid breakage of the FRP cover while it is coming down with certain force while in use. Foundation Angle 25x25x5 Pipe 50 NB hot dip Galvanized pipe. of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. • A16 , A 24 mm circlips are used for assembly. • Bolt M8X16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect

S/f of DOUBLE SWING as per following Specification -50NB hot dip galvanized swing top pipe of length 2950mm conforming to IS 1239 with GI thickness of 60 1730-1961 welded at its one ends (to be bolted over MAPS swing attachment deck pipe) -Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. -225mmx103mm junction box made from 3mm thick.

S/f of Wave Slide 2.1 m as per following Specification - Ladder Frame 25NB & 20NB Frame GI Pipe conforming to IS 1239(Part 1):1979- Hand Grip conforming to EN1176- 1:1998 (4.2.4.6) - Ladder Step - Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 (4.2.9.1) conforming to -16 SWG GI Plated Platform of size - 500x450x60mm -80NB hot dip galvanized center support pipe of length 2590mm conforming to IS 1239 with GI thickness of 60m - FRP Wave Slide Thickness 5mm * - SS Nut Bolts conforming to ASTM E-1086 : 1994 -Medium H-Support 25NB GI Pipe length 1490mmwith 10mm tor rod of length300mm for support & strong foundation -Small H-Support 25NB GI Pipe length 600mmwith 10mm tor rod of length300mm for support & strong foundation