PROVISION OF DEFICIENT INFRASTRUCTURE AT DOLLUNGMUKH RANGE UNDER GE(AF)TEZPUR

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

Construction of GUARD REST ROOM complete all as specified and as shown on drawings.

Construction of OPEN SHED FOR GYPSY complete all as specified and as shown on drawings.

Construction of STEEL TOWER complete all as specified and as shown on drawings.

SCHEDULE 'A' PART-II (EARTH WORK ) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-V (ROAD) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART-VIII (SECURITY WALL, FENCING AND GATE) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-IX (RETAINING WALL) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-X (PYRAMID) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-XI (BOMBING RANGE) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-XII (BOULDER FILLING ) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-XIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-XIV (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART-XV (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART -XVI (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES.

M & L for bringing approved earth from outside MOD land and forming embankments including raising (or lowering) earth, spreading in layers exc 30 cm thick, watering, ramming / rolling as per MORTH and finishing to required size, shape etc not exc 1.5 m high from base complete all as specified and as directed. Note:- The rate of the item shall include for excavation out side MD land and bringing approved soil to site including royality if any and nothing extra shall be admissible on this account.

S & F for ceiling fan 1200 mm sweep 240 volt AC, 5 star rating including down rod of suitable size, connected with twin core twisted flexible wire copper conductor cable with suitable size from ceiling rose to ceiling fan complete all as specified and as directed. Make: HAVELLS CAT NO. ES-50 5 Star or equivalent approved make as per list of make

S & F for LED street light luminaries of 30 watt white light pressure die cast housing with epoxy power coated , heat resistant toughened glass with individual LED lenses, electrically connecting up with three core 2.5 sqmm PVC insulated stranded copper wire with and including bracket made out of GI tubing light grade upto 1.50 meter long 25mm including bend into shape or welding as required and making holes and flat iron clamps 50x6mm thick with two nos nut, bolts and washers of suitable size to fix with steel tubular pole complete all as specified and as directed. Make : C&S electric cat No. LTESS12X2.5HP LED or equivalent approved make as per list of make.

S & F for Exhaust fan 300 mm sweep with suitable size louver, 1400 RPM, 240 volt, AC and including connected with twin core twisted flexible wire copper conductor cable with suitable size from ceiling rose to exhaust fan complete all as specified and as directed. Make: Havells Cat No. Turbo Force SP or equivalent approved make as per list of make.

S & F for 1 x 9 watt B22 standard cap colour temparature 6500K LED bulb at places compete all as specified and as directed.

S & F for LED light fitting, 1 x 10 Watt , 230 Volts indoor decorative aluminium extruded T5 LED Battens-integrated type, with bipin holders , connector block, etc.complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 22/0.0076 all as specified and as directed . Make : C&S electric cat No. LTTB2F10WLED/W or equivalent approved make as per list of make.

S & F for LED light fitting, 1x20 Watt , 230 Volts indoor decorative aluminium extruded T5 LED Battens-integrated type, with bipin holders , connector block, etc.complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 22/0.0076 all as specified and as directed . Make : C&S electric cat No. LTTB4F20WLED/W or equivalent approved make as per list of make.

S & F for MCB SP 6 to 32 Amps (C-Curve), breaking capacity 10 KA, 240 volts with cable connection and copper lugs complete all as specified and directed

S & F for MCB TPN 06 to 32 Amps (C-Curve), breaking capacity 10 KA, 240 volts with cable connection and copper lugs complete all as specified and as directed

S & F for factory made double pole sheet metal enclosure double door designed for mounting one SPN MCB including one 6-32 Amps, 10 KA, C-curve, SPN MCB and cable connection with copper lugs complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized steel wire 4mm dia earthing lead upto 7.5m from testing point fixed by means of galvanized iron or steel bolts nuts check nuts and washers, GI earth wire protected by 15mm bore light grade galvanized iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore medium grade galvanized iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness)all around the earth electrode with concrete earth pit in PCC (1 : 3 : 6) type C-1, (using 20 mm graded stone aggregate) ,cast iron frame, 50mm thick pre-cast RCC M-25 design mix cover slab size 450x450x50 mm reinforced with 8mm dia TMT bar 10cm C/C and suitable handle of 10mm dia round bar and MS angle iron 50x50x6 mm frame including two coats of painting over a coat of red oxide primer to exposed steel surface including necessary excavation, earth work in soft/loose soil and disposal off spoil to a distance n.exc 50m and necessary testing complete all as shown in Electrical Plate No 3 of SSR Part I and as directed.

S & F for 15 mm bore angular stop cock cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle with long shank and cup, screwed for iron pipe complete all as specified and as directed.

M & L for 200mm thick GSB (Granular sub-base) grade V as per MORTH, IRC specification spreading in two layers not exceeding 100mm thick each, watering, ramming/ rolling by tandom vibrator roller & transverse gradient and required camber for achieving field compaction at least 98% of MDD (Maximum Dry Density) determined using modified proctor density determination method as per IS code and CBR (Minumum 30) as per MORTH complete all as specified and as directed.

M & L for 150 mm thick (compacted thickness) (in two layers of 75 mm compacted thick each) Wet Mixed Macadam (WMM), using gradings requirement of aggregate as per Table 400-II of yellow book of MORTH in layer using mechanical paver and rolled with power roller of 8-10 tonne capacity of required camber and gradient complete all as speicified and as directed.

Construction of LLDPE (Linear Low Density Polyethylene) septic tank for 10 users complete all as specified and as shown on drawings.

Construction of soakage well for 10 users complete all as specified and as shown on drawings.

S & F for Ornamental designer gate made out of precast designed cast iron ornaments section fabricated and framed with other section with gusset plates, braces, etc including hanging or sliding with hooks and hinges and locking arrangement, handles complete all as speicified and as directed.

S & F for 1000 mm dia (Unstretched) conseczal super razor punched barb tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and as directed. No of circles - 51 turns per coil, Weight of each coil with hessian pack - 14.50 Kg (+ 0.7), Coverage per coil - 10 RM, Central core wire :- Made from 2.5 mm dia (+ 0.05 mm) GI - H.T.S.S wire as per IS -4454 Part I grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanised as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm per Sqm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethene of 2-5 micron thick and final paint top coat of certified green shead (BSL 139) by hot dipping process of 15 micron thick. Length of barb 23.5 mm (+1 mm), Width of barb 18.6 mm (+ 1 mm), Centre to centre pitch 36 mm (+ 1 mm), Centre width 7.4 mm (+ 1 mm), GI fixing accessories "C" Clip 2 mm wire diameter, 40 mm long, 15 mm centre dia "U" Clip 1 mm thick, 28 mm straightened length, " J" clip:- 31 mm length, 8 mm width, 1 mm thick.

Material and Labour for Drilling of bore hole by reverse rotary rig / ODEX method or any other suitable method, through any kind of soil, boulders, rocks for a bore of 150 mm dia suitable for lowering (Including lowering) of 100 mm casing pipe with provision of space for filling pea gravel all round the housing pipe for the depth from ground level upto a depth of 50 mtr including making of initial bore hole manually including disposal of spoil from the site complete all as specified and as directed. Note: Depending upon the availability of water bearing strata, if drilling beyond 50 metre is required, the same shall be carried out as per direction of GE and shall be measured and paid separately under respective item of BOQ

Material and Labour for Drilling of bore hole by reverse rotary rig / ODEX method or any other suitable method, through any kind of soil, boulders, rocks for a bore of 150 mm dia suitable for lowering (Including lowering) of 100 mm casing pipe with provision of space for filling pea gravel all round the housing pipe for the depth from above 50 mtr of ground level including making of initial bore hole manually including disposal of spoil from the site complete all as specified and as directed.

Supply and packing washed pea gravels round or sub-rounded of size 3 mm to 8 mm as approved in packed thickness all around the housing and strainer pipe complete all as specified and as directed.

S & F for MS threaded well cap suitable for 100 mm dia housing pipe and cut rounded shape for passing column pipe of required size and submersible cable including painting complete all as specified and as directed.

Supply, lowering and welding in position ISI marked ERW fine cut MS black pipe 100 mm bore with minimum 7mm wall thickness as per IS: 4270 (1992) with socket and jointing length of pipes by mild steel socket threaded and by electric arc welding joints with MS coupler ring around the pipes with MS flat iron 50 mm x 6 mm including painting with two coats of black bituminous paints externally and internally complete all as specified and as directed.

Supply and fixing including lowering of bail plug of 100 mm internal dia, 3 mtr long and 7 mm thick threaded and continuous welded by electric arc welding at both ends and including two coats of black bituminous paint complete all as specified and as directed.

Supply and fixing including lowering in position 'V' wirewell screen of LCG of 100 mm internal dia with slot opening 1.5 mm with copper ring welded all round the pipe complete all as specified and as directed.

Supply and fixing for 80 mm bore galvanised steel tubing medium grade of 3 mtr long as in gravel filling arrangement to bore well, fixed to metre below groundlevel and 1 mtr above ground with PCC foundation block of size 1 mtr x 1 mtr x 1.2 mtr in PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) complete all as specified and as directed.

Supply and fixing and lowering 50 mm bore MS column pipe (seam less) both end flanged including fittings complete of heavy duty, wall thickness not less than 5.4 mm conforming to IS 1239 (each piece of 3 mtr length) and welded including nuts, bolts, washers, gasket complete all as specified and as directed (flanged should suitably grooved for passing submersible pump set with stranded steel flexible wire rope and cable). Make : Tata/Jindal/SAIL

Supply and fixing PVC insulated and sheathed flat 3 core copper submersible cable 6 sqmm 1100 Volt grade, heavy duty, water proof including necessary connection complete all as specified and as directed.

Supply and fixing Pressure meter 0 to 5 kg / cm2 complete all as specified and as directed.

Supply, install, testing and commissioning of LT Feeder pillar box of size 600 mm x 700 mm x 400 mm, outdoor type, platform mounted, totally enclosed, dust and vermin proof, openable from both front and rear side, made out of 3.15 mm thick CRCA sheet complete including inner chambers / partitions to mount the following electrical accessories and built upon 50 mm X 50 mm X 6 mm angle iron frame work, having front and rear hinged doors, lifting lugs (2 Nos), provision for earth strip connection, bottom detachable gland plates, connection using suitable size of zinc plated and passivated nut, bolts, springs and washers. The cabinet and all members should be chemically treated with anti-corrosive chemical and apply spray paint with two coats of synthetic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts, 50 Hz, 3 phase, 4 wire system, coloured heat shrinkable sleaving, internal connection should be provided with copper strip of suitable size and necessary grouting / foundation all as required at site and comprising following complete all as specified and as directed. a) Copper Bus bar of 100 Amp. b) LED Indicator lamp R-Y-B -01 Set of O3 Nos. c) Digital VAF meter with suitable CTs as required. d) MCB 40 Amps TPN, 440 Volts, 'C' curve – 1 No. e) DOL starter suitable for 5 HP pump. -01 No

Supply, install, testing and commissioning of submersible pumping set electric driven 3 phase, 415 volt AC motor of 5 HP capacity, cast iron pump bowls diffuser casing stainless steel pump shaft, bronze impeller, steel tube motor casing and carbon steel motor shaft complete all as specified and as directed. Make : Kirloskar/KSB/Jyoti/CALAMA

S & F for MCB SPN 40 to 63 Amps (C-Curve), breaking capacity 10 KA, 240 volts with cable connection and copper lugs complete all as specified and as directed

M & L for boring of holes carefully under road / pavement / hard standing by trenches using ultra sound technique (trenchless techonology) and necessary machine and Supply and Laying of 150 mm dia HDPE pipe suitable for 0.4 mpa working pressure complete all as specified and as directed.

S & F for cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 / 4 core XLPE, armoured, aluminium conductor cable of size 185 sqmm to 240 sqmm indoor / out door type complete all as specified and as directed.

S & F for 40 Watt LED post top lantern light fitting made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP-65 protection complete with all accessories pre-wired and including connecting up with suitable size three core twisted flexible copper conductor cable complete all as specified and as directed. Make:Bajaj Cat No BGCL 40W LED WH or equivalent make as mentioned in List of Makes.

Supply, install, testing and commissioning of LT Cubical panel of size 1500 mm x 1000 mm x 500 mm, indoor type, platform mounted, totally enclosed, dust and vermin proof, openable from both front and rear side, made out of 2mm thick CRCA sheet complete including inner chambers / partitions to mount the following electrical accessories and built upon 50 mm X 50 mm X 6 mm angle iron frame work, having front and rear hinged doors, lifting lugs (2 Nos), provision for earth strip connection, bottom detachable gland plates, connection using suitable size of zinc plated and passivated nut, bolts, springs and washers. The cabinet and all members should be chemically treated with anti-corrosive chemical and apply spray paint with two coats of synthetic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts, 50 Hz, 3 phase, 4 wire system, coloured heat shrinkable sleaving, internal connection should be provided with alumimium strip of suitable size and necessary grouting / foundation all as required at site and comprising following complete all as specified and as directed. a) Aluminium Bus bar of size 63 mm X 10 mm cross section on post Insulator = 04 Nos. b) LED Indicator lamp R-Y-B -01 Set of O3 Nos. c) Digital VAF meter with suitable CTs as required. d) MCCB 63 Amps TPN, 440 Volts, 3 phase , 4 wire, 25 KA manual draw-out type, micro processer based, complete – 1 No. e) MCCB of 4 pole of capacity 32 amps with breaking capacity of 16 KA. -02 Nos

S & F for Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure including LED lamp, complete with all accessories pre-wired and including connecting up with suitable size three core twisted flexible copper conductor cable complete all as specified and as directed . Make: BAJAJ Cat No BGAV 302 LED or equivalent make as mentioned in List of Makes.

S & F for 80 watt LED fitting of endura Bay Brite Energy saving, environment friendly, long life , exclusive innovative pressure die cast aluminum (IP 66) Bay light with high power LEDs as light source, suitable for highlighting architectural feature or retail spaces including LED lamp with all accessories pre-wired and including connecting up with suitable size three core twisted flexible copper conductor cable complete all as specified and as directed. Make: Havells Cat No lHELANU7PG6J080 or equivalent make as mentioned in List of Makes.

Materials and labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized steel strip of size 32 mm x 6 mm as earthing lead upto 7.5m from testing point fixed by means of galvanized iron or steel bolts nuts check nuts and washers, GI earth wire protected by 15mm bore light grade galvanized iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore medium grade galvanized iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness)all around the earth electrode with concrete earth pit in PCC (1 : 3 : 6) type C-1, (using 20 mm graded stone aggregate) ,cast iron frame, 50mm thick pre-cast RCC M-25 design mix cover slab size 450x450x50 mm reinforced with 8mm dia TMT bar 10cm C/C and suitable handle of 10mm dia round bar and MS angle iron 50x50x6 mm frame including two coats of painting over a coat of red oxide primer to exposed steel surface including necessary excavation, earth work in soft/loose soil and disposal off spoil to a distance n.exc 50m and necessary testing complete all as shown in Electrical Plate No 3 of SSR Part I and as directed.

Supply, install, testing and commissioning Silent type Diesel Engine Generating set 415 volts 110 KVA/ nearest higher size available KVA, 3 phase 0.8 power factor, 50 Hz, 1500 RPM self exicited self regulated brushless AC generator installed including acoustic enclosure suitable for ambient condition at TEZPUR and conforming to condition under IS: 10001 / 10002, 13364 Part I 1992, BS 5514/5000, complete, all as specified and directed.

All as per item No 16.41 here in before but of capacity 10 KVA.

Supply, installation, testing and commissioning of maintenance free chemical earthing station using single spikes 17.2mm dia, 3000 mm long high tensile low carbon steel circular rod, molecularly bonded with copper on outer surface (minimum copper bonding thickness of 250 microns) meeting the requirements of under writers laboratories (UL) 467-2007 or latest with 250mm long copper strips of size 50 mm X 3 mm, exothermally welded on top of electrode complete including augering (boring) 100 to 125 mm dia hole as required for electrode in any type of soil and back filling with carbon based ground enhancing compound (GEC) compound (with minimum qty 35 Kg per electrode) conforming to IEEE / BS standards complete all as recommended by OEM to achieve the required result complete all as specified and as directed. Make : JEF Techno solution Pvt Ltd / Tercel/ McML / Macmet / Erico / Reslow JK earth electrode Note :- (i) The work of earthing shall be carried out by authorized trained rep of OEM. (ii) The acceptable earth resistance at earth busbar / test point shall not be more than 1.0 Ohm . (iii) Loop conductor with 32x6mm strip shall be measured and paid separately. (iv) The Earthing Result should be achieved less that 1 Ohm, otherwise the Payment will not be made if the result are more than 1 Ohm.)

Phoenix Infra

M.P. Khaitan

City Promoter and Buildwell Pvt. Ltd.