ELECTRIFICATION WORK ON TURNKEY BASIS UNDER EDD III MAINPURI

Amount

Steel Tubler Pole 11 mtr. Long GI Bottam

PCC Pole 8.5 mtr. Long

Stone Pad 300×300×75mm

MS Top Channal (125*65*3200 mm.)

MS Angle Iron for Bracing with Clamp, Bolt & Nut (65x65x6x4300 mm.)

MS Dropper Channal (100*50*2028)

M.S. T-off Channel (125*65*1300mm.)

Clamp with Nut & Bolt FOR T-OFF CHANNEL

11 KV disc insulator B&S Type 7000 KG with Fitting

11 KV Pin Insulator with Pin & Nut

11 kV T.P.M.O.

Danger board with Clamp for 33/11 KV.

Holding Clamp for PCC Pole

Suspension Clamp with I-Hook

Dead End with I-Hook & clamp For PCC pole

Piercing Connector for AB Cable.

PG Clamp for weasel / Dog Conductor

LT Distribution Box (3 P, 4w) with Clamp

Connecting cable for Distribution Box.

LT XLPE cable 1x400 Sq.mm.

LT XLPE cable 1x120 Sq.mm.

LT ABC CABLE (3*120+1*95*+1*16) Sq.mm.

LT ABC CABLE (1x16+1x25Sq.mm.)

Henley type tail less unit 500A

Aluminium Buswar 65x10x900 (Tailless)

Clamp with Nut & BOLT For Top Dropper and Base

Bolt, Nut & washer

Guarding Angle with Clamp (size50x50x6mm length 1.4 mtr. For 33/11 KV line )

G.I. Barbed Wire 6 SWG

Aluminium Binding Wire 6 SWG

Clamp for X-Arm for 33 KV with Nut & Bolts

G.I. Wire 8 SWG for Guarding

G.I. Wire 10 SWG for Guarding

X arm (65x65x6mm.) for 11 KV with Clamp

F- Clamp for 11 KV.

ACSR Weasel Conductor

Earthing of Pole by MS Earthing Rod of 20*2500 mm. & 6 SWG Earthing wire etc.

Stay Complete (Stay Rod 16*1800mm., Stay Wire 5 Kg., Stay Clamp, Bolt and Nut with Grouting/Concreting)

Concreting of Pole As per Norms (0.268 Cu.m.each)

400 KVA Copper wound Tranformer

LT incomming Pannel with metering equipment & Fixing arrangment

4 Core LT MCB Box.

Copper L Piece 50x225x10 mm.(LS)

LT Cable 1x630 Sq.mm.

Luge long barrel off Size/630 Sq.mm.

11 KV Fuse Set

Number Plate

Earth wire Clamp with Nut & Bolt

Outdoor equipment (earth mat)

Indoor equipment

Barbed wire fencing with gate etc. (switchyard)

Outdoor switchyard & Approach Road lighting

11 KV cable jointing kit outdoor 185&300 sq.mm.

33 KV Pin Insulator with Pin & Nut

33 KV disc insulator B&S Type 7000 KG

33 KV disc fitting Dog/ Raccon 7000 KG

33 kv Line Isolator

33 KV Bus Isolator

Structure for above

33 KV Lightening arresters Set.

Structure for above

90 Ibs rail pieces for transformer (44.64Kg/M)

Plinth of transformer

Sundries (LS)

33/11 KV 5 MVA Transformer

33 KV VCB with single T/F control pannel & CT 600/300/1 A with Structure (ii) Control Pannel I/C for 33 KV Single T/F (iii) CT 600/300/5 A (iv) Steel Structure

Plinth & Foundation for VCB

11 KV VCB I/C CTR 600/300/5 A

11 KV VCB O/G FDR CTR 200/100/5 A 250 MVA

185 mm sq XLPE Cable for 11 KV 3 Core

300 mm sq XLPE Cable for 11 KV 3 Core

HDPE Pipe PN-8 160 mm dia suitable for 33 KV Cable, Laying under

G.I. Pipe Heavy 150 mm dia for Double Pole Structure (6.0x2) x 2 Nos. = 20 Mtr.

Clamp for Fixing of Cable (2.0x2) x 4 Nos. = 16 Nos.

300 mm sq XLPE Cable for 33 KV 3 Core

33 KV Heat Shrinkable cable boxes for 33 KV XLPE cable 3x300 Sq.mm. I/D & O/D Type (1.0x2)x2 Nos.= 4 Nos.

Cable Marker (1.0x2)x2 Nos. = 4 Nos.

Wooden Bushes (1.0x2) x 2 Nos. = 4 Nos.

Laying of 11 KV Cable including cost of sand & Bricks

Making of 11 KV cable boxes mounted with switch gears & T/F (Kit)

Control cable 4x2.5 mm sq.

Control cable 2x2.5 mm sq.

Terminal Gantry

Main bus bar complete with structure

V type X-Arm for 33 KV

F-Bracket for 33 KV

E-Bracket for 33 KV

Aluminium Tape

Supply, Install, Testing and commissioning of Outdoor Non-seald type Mineral oil immeresed Distribution Transformer ISI Marked (IS-1180/2014) Step up/Step down, Copper wound, having primary side voltage at 11 KV, 3 Phase and secondary side having 3 Phase and neutral (4 wire system), 433 volts at 50Hz frequency of Capacity 250 KVA.

Supply, Install, Testing and commissioning of Outdoor Non-seald type Mineral oil immeresed Distribution Transformer ISI Marked (IS-1180/2014) Step up/Step down, Copper wound, having primary side voltage at 11 KV, 3 Phase and secondary side having 3 Phase and neutral (4 wire system), 433 volts at 50Hz frequency of Capacity 400 KVA.

Supply, Laying & Testing cable XLPE insulated, screened, PVC bedded, Galvanized Steel strip or wire armoured, electric power cable (Heavy Duty) with stranded aluminium conductor, 11000 volts grade of size 3 core 95 Sq.mm. complete all as specified and directed.

Supply, Laying & Testing cable XLPE insulated, screened, PVC bedded, Galvanized Steel strip or wire armoured, electric power cable (Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 400 Sq.mm. 3.5 core complete all as specified and directed.

Trolley 4 wheeler size 3658(L)mm.*1829(W)mm.*1900(H)mm. of weight approz. 1760 KG. with following specifications & detail. Main Chasis :- Made of M.S. Channel 150*75 mm.

Trolley 4 wheeler size 3658(L)mm.*1829(W)mm.*1900(H)mm. of weight approz. 1760 KG. with following specifications & detail. Main Chasis :- Made of M.S. Channel 150*75 mm. Side Runner:- Side runner and cross members Channel made of MS. 100*50mm. Leaf Springs:- 4 Nos Leaf Springs Size 70*11*900mm. Consist 13 Leaf each. Axle:- 2 Nos. Axles made of 75*75 mm. M.S. Square with water proof steel forged Hubs and Tapper Roller Bearings. Turn Table :- 2 Nos. Angle Ring 50*6mm. with male female Pipe Bushes with Locking Bolt 36mm. Draw Bar-Triangular Draw Bar, Detachable type made of M.S. Channel 75*40mm. Towing Arrangement :- Spring Loaded Steel Towing Hook of 36 mm. round Floor sheet :- Floor fully Covered with 06 mm. Thick M.S. Sheet.

Cable Jointing Kit for 11 KV Grade cable for Outdoor Termination, Heat Shrink Type, Joint complete with Jointing Material & accessories suitable for 3 core XLPE armoured, AI conductor cable of size 50 Sq.mm. to 95 Sq.mm. Complete all as specified & directed.

Earth Continuity conductor or main earthing lead made of PVC insulated single core copper multistranded cable 1100 volts grade 25 Sq.mm. of 15 RM long with copper Lugs at both and with provision of nut volts and washer complete as Specified and directed. (For Tranformer body and neutral earthing from existing earth point).

Supply and Laying insulated Rubber mat size 1m*2m*19m(WxLXT) suitable for electric supply 11000 volts as per specified by Engg-in-charge.

Supply and Laying insulated Rubber mat size 1m*2m*10m(WxLXT) suitable for electric supply 11000 volts as per specified by Engg-in-charge.

FRP fencing for 250/400 KVA Transformer

Interlocking tiles inside Transformer fencing for 250/400 KVA Transformer

Plinth of Transformer Size 2*2*1.5m. (As per Norms. For Transformer)

Boring type Earthing for 250/400 KVA Transformer (Delta type)

Received Back Safe carriage from site to Store center Mainpuri for 250 KVA T/F

Conductor ACSR Dog+5% sag, Jumpering & Binding

M/S Sushil Kumar