Loading
Loading…
Loading…
Tender Value
₹3.5 Cr
EMD Value
₹6.5 L
Closing Date
6 Jun 2026, 9:30 pmDue today
Directorate of Municipal Administration
Providing and laying 200 mm, 300 mm, 450 mm, 600 mm and 1200 mm dia UGD pipeline and construction of machineholes and drinking water supply development work at Siddartha nagar, K C Layout, J C Nagar, Agrahara, Chamarajapuram, Lakshmipuram, Jayanagara, Sunnadakeri, Vidyaranyapuram, Kuvempunagar and T.K Layout area in ward no.47, 48, 49, 50, 51, 52, 53, 57, 60 and 43, Mysuru
293466
DMA/2025-26/WS/WORK_INDENT55319/CALL-2
Open
Water supply/sewage lines
DMA City Corporation Mysuru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
3.2To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (b) Satisfactory completed, at least one similar work of laying of ugd pipeline of value not less than Rs. 215.00 Lakhs as a prime contractor
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (c) Executed at least min quantities of work as specified below for continuous period of 12 months during last 5 financial years - Earthwork excavation -13511.00 cum
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (c) Executed at least min quantities of work as specified below for continuous period of 12 months during last 5 financial years - RCC pipe (greater than or equal to 300 mm dia) - 1476.00 Rmtr
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (c) Executed at least min quantities of work as specified below for continuous period of 12 months during last 5 financial years - RCC pipe (greater than or equal to 600 mm dia) - 636.00 Rmtr
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (c) Executed at least min quantities of work as specified below for continuous period of 12 months during last 5 financial years - SW pipe (greater than or equal to 200 mm dia) - 6076.00 Rmtr
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (c) Executed at least min quantities of work as specified below for continuous period of 12 months during last 5 financial years - Machineholes - 196.00 Nos
3.3 Each tenderer should further demonstrate: availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O./ purchase invoice for own vehicle and hire/lease agreements for hire vehicle) shall be furnished- Excavator- 2 No - Minimum 1 Own (RC/Invoice Copy)
3.3 Each tenderer should further demonstrate: availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O./ purchase invoice for own vehicle and hire/lease agreements for hire vehicle) shall be furnished- Tipper - 2 No - Minimum 1 Own (RC Copy)
3.3 Each tenderer should further demonstrate: availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O./ purchase invoice for own vehicle and hire/lease agreements for hire vehicle) shall be furnished- Crane (Minimum 6 Ton Capacity)- 1 No - Own (RC Copy)
3.3 Each tenderer should further demonstrate: availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O./ purchase invoice for own vehicle and hire/lease agreements for hire vehicle) shall be furnished- Water tanker- 2 No - Minimum 1 Own (Invoice Copy)
3.3 Each tenderer should further demonstrate: availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O./ purchase invoice for own vehicle and hire/lease agreements for hire vehicle) shall be furnished- Soil compactor- 1 No - Own/Hire (Invoice Copy)
3.2 To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (a) Achieved in at least two financial years a minimum annual financial turnover of Rs. 860 Lakhs.
3.3 Each tenderer should further demonstrate: b) liquid assets and or availability of credit facilities of not less than Rs. 129.00 Lakhs (Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc. (Conditional Line of credit proposal will be rejected)
₹5,000
₹6.5 L
5 May 2026
5 May 2026
8 Jun 2026
29 May 2026
25 May 2026
Providing and laying 200 mm, 300 mm, 450 mm, 600 mm and 1200 mm dia UGD pipeline and construction of machineholes and drinking water supply development work at Siddartha nagar, K C Layout, J C Nagar, Agrahara, Chamarajapuram, Lakshmipuram, Jayanagara, Sunnadakeri, Vidyaranyapuram, Kuvempunagar and T.K Layout area in ward no.47, 48, 49, 50, 51, 52, 53, 57, 60 and 43, Mysuru
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work si...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joi...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Manufacturing, providing, trasporting, rolling, lowering, laying,jointing and commissioning of ERW (Electric Resistance Welded)/SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) conformi...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1....
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW 4 430.doc
Tender Document • 1.11 MB
Download all tender documents and submit your bid