Interior Fit-out Renovation work for office space of NPST at B-302, 3rd floor Tower-B WTC Nauroji Nagar, New Delhi.

BILL OF QUANTITIES (BOQ)

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

2 ELECTRICAL WORKS 23,33,344.00 37,72,226.43

3 AUDIO- VIDEO WORKS - 1,42,68,186.33

4 PLUMBING & FIREFIGHTING WORKS 1,12,331.70 1,93,876.43

5 CIVIL & INTERIOR WORKS 25,34,014.70 92,22,092.34

6 FURNITURE - 97,59,444.09

B TOTAL i/c GST 4,42,16,566.00

Digitally signed by AMIT

SINGH 17:27:36 IST

DSR -2022 NON- DSR

Sno. DSR Ref No. Description Units Qty Rate DSR Total amount Rate

Sno. DSR Ref No. Description Units Qty Rate DSR Total amount Rate

A Chilled water

1 MR Replace AHU canvas connections Nos 1.00 5,231.41 5,231.41

2 Supply, Installation, Testing Balancing & Commissioning of G.S.S square/ rectangular ducting

complete with gaskets, elbows, splitters, vanes, supports adjustable dampers, etc. as per

drawings and as required for dehumidified air distribution of following thickness as per

approved working drawings and requirement .

3 Supply and fixing of external thermal insulation on supply air ducts with 19mm thick chemically

cross linked closed cell polythene (XLPE) fire retardant grade insulation of density not less

than 30kg per cum in single layer with factory lamination of 30 micron aluminium foil or

16.23.1 19mm thick insulation as per CPWD specifications

4 Suply, installation, testing and commissioning of GI volume control duct damper complete

with neoprene rubber gaskets,nut,bolts,screws linkages,flanges etc. as per specifications Sq.m 45.00 7,046.00 3,17,070.00

5 Supplying, fixing, testing & commissioning of powder coated extruded aluminium section

supply air grills with aluminium volume control dampers, as per specifications. Sq.m 12.00 9,105.00 1,09,260.00

6 Supplying, & fixing, of powder coated extruded aluminium section return air grills with louvers

but without volume control dampers, complete as per required.

7 Supplying, fixing, testing commissioning of supply air diffusers of powder coated aluminium

with aluminium volume control dampers. ( 23Nos of 600x600mm)

8 Supplying, fixing, testing, commissioning of return air diffusers of powder coated aluminium.

9 Supplying, fixing Acoustic lining of supply air ducting complete with G.I frame, tissue paper,

28G perforated al. Sheet, 25mm thick 32kg/cu.m fibreglass insulation as per CPWD Sqm 10.00 708.00 7,080.00

16.21 specifications.

10 Supplying, fixing , testing and commissioning of fire dampers in supply air duct/ main branch

and return air path as & where required of required sizes including control wiring. The damper

shall be motorised and spring return so as to close the damper in the event of power failure

automatically and open the same in case of power being restored .the spring return action

shall be built mechanism and not externally mounted . The damper shall also be closed in the

event of a fire signals complete as required as per specifications .

b 16.20.2 Motorised Actuator No. 2.00 9,948.00 19,896.00

Digitally signed by AMIT

SINGH 17:27:36 IST

Supplying, fixing, testing commissioning of Inline Fan of GI Casing Circular / Rectangular Type

with light weight dynamic balanced GI Impeller, suitable forSingle Phase Motor (Without

MR Speed Regulator, Bird Screen and Louver) for toilet/ dinning / pantry exhaust.

7 Control & Trasmission Wiring

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in suitable

conduits between indoor and outdoor unit.

Low side Airconditioning works including chasing, Copper piping, insulation of copper pipe,

and repairing of chased area with cement and mortar wherever required to match existing

plastered surface. Specified brand for insulation Superlon with wall thickness of minimum

13mm. SPecified brand for copper piping RAJCO or equivalent. (FOR HIGH WALL SPLIT UNITS).

Only One (1) length between indoor and outdoor unit shall be measured for payment.

SITC of 1.0 T split with rotary compressor of 5 Star rating Inverter technology approved make

make inclusive of 5 year warranty on compressor all complete. (Note- Indoor and outdoor unit Nos. 2.00 47,186.53 94,373.06

MR should have copper Condensor and cooling coil.)

Supply, installation, testing and commissioning of dia 32mm uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories as Rmt 30.00 225.58 6,767.26

MR per specifications, drawings.

MR Timer for Split ac for Server Nos. 1.00 3,719.59 3,719.59

Providing and fixing lockable MS cage for outdoor units primered and painted black.

MS Standard for ODU

Providing and fixing MS Stand for ODU along with vibration pad as per approved drawing.

Digitally signed by AMIT

SINGH 17:27:36 IST

SUMMARY OF BOQ FOR ELECTRICAL WORKS

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL & DISTRIBUTION BOARD Rs. 4,53,530 Rs. -

2 CABELS / MAINS Rs. 3,13,709 Rs. 2,488

4 LIGHTING FIXTURES Rs. 7,61,765 -

5 WIRING FOR DATA AND VOICE OUTLETS Rs. 4,69,626 Rs. 4,55,300

6 CABLE TRAY.& RACE WAY. Rs. 3,35,782 Rs. 49,915

7 ACCESS CONTROL SYSTEM Rs. 3,86,626 -

8 FIRE ALARM & PA SYSTEM Rs. 6,526 Rs. 7,51,199

9 UPS & INVERTER SYSTEM Rs. 6,68,368 Rs. -

10 CCTV System Rs. 3,65,535 Rs. 1,02,400

GRAND TOTAL Rs. 61,05,570

GRAND TOTAL Rs. 61,05,570

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

DSR-2022 Description

S.No Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

1.1.1 Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free standing

floor mounted indoor MV panel made out of 14 SWG sheet after seven tank process and

painting with epoxy powder coating MV electrical panel shall be dust and vermin proof

,hinged and locable doors.The panel shall consist of suitable rating TPN bus bar at the rating

of 0.8A /SQMM Supported by DMC/SMC insulator and color coded with heat shrinkable

sleeves. Metering shall be provided as specified .The panel shall have short circuiting with

standing capacity of minimum 36KA and consist of the switch gear as mentioned below .The

panel shall got fabricated from manufacturer with CPRI test certificate .The panel shall be

mounted on U channel including supply and fixing of the same.(including Capacitor banks)

− 250 Amps 4P On Load change over switch. -1No.

− 250 Amps 4P 36KA MCCB. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

− Digital V A F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED indicating

lamps and control SP MCBs.

Outgoing Section

− 63 Amps FP MCB_C curve -4Nos.

− 80 Amps FP MCCB -1No.

− 125Amps 4P25KA MCCB-3Nos.

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps TP MCB -3Nos.

− 32 Amps TP MCB -4No.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

− Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No

− Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

− Control Blocks_7 Nos

Enclosure, 300A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

MR Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 1.00 2,40,465.81 2,40,465.81

1.1.2 Supplying the following MCCBs in sheet steel enclosure. For Ups Input & Output

Digitally signed by AMIT

SINGH 17:27:36 IST

125A 4P MCCB in sheet steel enclosure surface mounted on the wall along with incoming &

a) MR outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable. (For Ups Input ) No. 2.00 13,160.98 26,321.96

b) UPS Output panel

- 125 A 4P Onload changeover switch in sheet steel enclosure surface mounted on the wall

along with incoming & outgoing Cable Box, suitable for Termination of Aluminium / Copper

- Outgoing Section

- 80 Amps FP MCCB -3No.

- Spreaders-3Set.

- Extended Rotary Operating Mechanism.-3Set

Enclosure, 200A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

MR Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 1.00 31,605.95 31,605.95

1.2 DISTRIBUTION BOARDS.

Supply , installation ,testing and commissioning of 'MCB double door Distribution Boards

dust and vermin 'proof protected and AC supply operation including incoming

MCB/ELCB/RCBO/MCCB as per specifications and required capacity Neutral bar and Earth

Terminal complete as required and installed in concealed in wall after necessary chase

cutting with finishing /surface on wall including all fixing materials required.

12Way VTPN MCB DB with 80A 4P MCCB(36KA) as incoming and 36 nos (6-32A)SP MCB as

outgoing.(For UPS DB)

12Way VTPN MCB DB(Vertical type) with 63A 4P RCCB as incoming and 36 nos (6-32A-10KA

)SP MCB as outgoing.(For LPDB)

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-32A-10KA )SP

MCB as outgoing.(ACDB)

12Way SPN MCB DB with 40A DP RCCBas incoming and 10nos (16-20A-10KA )SP MCB as

outgoing.(For Server)

Total of Main Panel/ DB carried over to summary 4,53,530.02 0.00

3.0 CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC insulated cores under ground PVC

tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown

at site and further as directed by Engineer-in charge

a MR 185 Sq.mm 3 1/2 core Aluminium cable mtr. 50.00 1,741.42 87,070.94

b MR 35 Sq.mm 3 1/2 core Aluminium cable mtr. 50.00 434.66 21,733.13

c MR 16 Sq.mm 4 core copper cable mtr. 80.00 308.72 24,697.67

d MR 25 Sq.mm 4 core copper cable mtr. 80.00 397.31 31,785.16

Digitally signed by AMIT

SINGH 17:27:36 IST

e MR 04 Sq.mm 3 core Copper cable (For AC Units) mtr. 300.00 474.14 1,42,242.55

Supply & fixing of end termination for above mentioned cables including compressed type

3.1 brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with

earthing of glands in following sizes

Total of Cables / Mains carried over to summary 3,13,709.30 2,488.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose ,

and anodised GI switch box with modular switch ,modular plate and the box covered with

a 1.3.3 One light point controlled by one 6A switch Per Pts 92.00 1,845.00 1,69,740.00

Secondary light point controlled by same switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 280.00 327.00 91,560.00

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

4.3 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 1.00 1,845.00 1,845.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable Per Pts 1.00 1,981.00 1,981.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 10.00 122.00 1,220.00

d 1.24.5 6 pin 15/16 A socket outlet Each 15.00 197.00 2,955.00

Digitally signed by AMIT

SINGH 17:27:36 IST

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 65.00 47.00 3,055.00

existing surface/ recessed steel/ PVC conduit as required.

4.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 35.00 307.39 10,758.70

1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Supply and fixing of 3 nos. 6A socket with 6M modular GI box, base plate and cover plate

below worktop, along with 1no. 6A socket, 1 no. 6A switch and 1 no. 16A switch(for 3 nos.

sockets) in 4M modular GI box, base plate and cover plate above worktop complete as per

drawings and instructions of engineer in charge.

Total of Wiring carried over to summary 10,758.70 9,72,042.00

5 LIGHTING FIXTURES

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600

lumen. The product should be SMD based and have non integral isolated driver with 2KV

inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour

at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have

teflon coted multi strand wires and external wire should have PVC coated multistrand wires.

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights

with maximum 12 Watt with minimum 1320 lumen.The product should be SMD based & have

non integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF >0.9,Product

5.2 MR should have life class of 50K burning hour at L70 B50 parameter, Luminiare operating temp 0 Nos. 37.00 857.41 31,724.30

D to 45D. Internal wiring should have teflon coted multi strand wires and external wire should

have PVC coated multistrand wires.

SITC of Extruded Aluminium surface mounted 36Watt, 4000 lumen LED batten with PC Diffuser

and Spring Steel Clamps for Surface Mounting arrangement. Driver THD<15%, PF >0.9,with

5.3 MR 2KV inbuilt surge protection. Internal wiring should have teflon coted multi strand wires and Nos. 130.00 996.54 1,29,550.35

external wire should have PVC coated multistrand wires.

Digitally signed by AMIT

SINGH 17:27:36 IST

SITC of 7W recessed mounted COB light fixture with dia cast aluminium body, having 95

5.4 MR lumens/ watt, with minimum of 35,000 burning hours, 32-40 degee focus beam complete Nos. 54.00 1,250.65 67,535.21

with all accessories as required.

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed type linear

Luminaire of size 72mm (N.S.), Linear ultra modular fixture made up of extruded aluminium

housing with luminare efficasy more than 100 LPW, CRI >80, CCT of 5700K. suitable for 220 V,

50 Hz, The luminare rated life (L70) >50000 Hours with High efficiency driver with inbuild surge

protection, over voltage protection, short circuit protection and operating at >0.95 .making

suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. The price shall

include all accessories including jointing kit for uniform continuous lines of light across ceiling

etc complete in all respect

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated

with polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2.

thickness of 0.3mm. The appearance of fabric is Matl. smooth and uniform with blance color

and ligth transmission of 50%. The tear strength of febric should be accordance to CH.

4.5daN; TR: 6.5 daN. The fire Railing should be accordance to B-S1, do. The febric should be

humidity ressistant and free of cercinogenic subtance (CMR) or volatile organic compounds

(VOC's). At lableing in accordance with the French decree no, 2011- 321, Oeko -Tex

standar100 certified. The fabric should be paintabe/printable with approved manufacturer

5.6 MR guidelines with 10-year manufacture guarantee. the Installation of fabric should be dry Sqm 3.60 12,296.99 44,269.18

installation 7done at room tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-

C10QS/P-C11QS/P-CCB022/P-B1/P-CC1P. There are several lighting options available

including various LED options and fluorescent lighting. When Positioned properly. LED

Lighting modules provide an even light flow, casting no shadowns or hot spots. coverings

are used for a variety of aluminated applications, including but not limited to walls, ceiling,

lightboxs or wall frames. coverings can enhance your door with a variety of spacial effects

fiber optics or changinglights, or create a statement piece incorporating custom printing.

The cost of electrical cove light fixtures is included in the same.

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Providing & Fixing of 7W - 10W cylindrical surface/ suspended light fixture having a minimum

5.8 MR of 630 lumens of dimensions - 35(L) x 20(w) x 20(h) mm as per the approval of the engineer In each 8.00 1,839.47 14,715.76

Total of Light Fixture carried over to summary 7,61,765.05 0.00

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-

III) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Digitally signed by AMIT

SINGH 17:27:36 IST

Supplying and drawing of UTP CAT 7 LAN Cable in the existing surface/ recessed Steel/ PVC

conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in

wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 75.00 148.00 11,100.00

7.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring

a MR shuttered front access for preventing ingress of dust, dimension as per commercially Nos. 5.00 90.54 452.69

available modular office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (RJ45 for data ) and (RJ-11 for voice) or as

b. MR required square plate having spring shuttered front access for preventing ingress of dust, Nos. 75.00 90.54 6,790.39

dimension as per commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

7.6 MR generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or in mtr. 180.00 457.81 82,406.22

existing pipe as required and includig making terminal joints, complete as required.

Supplying, installing, testing and commissioning of 24 port Cat 6 patch panels available with

block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded

CAT6 U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less

connector U/UTP unit in a block.

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D'

Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass

Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C

90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets

with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2

Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling

Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels

(without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP

foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as

Total of Data & Voice carried over to summary 4,69,626.32 4,55,300.00

8 CABLE TRAY.& RACE WAY.

Digitally signed by AMIT

SINGH 17:27:36 IST

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated

out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with

providing of Anchor fastners and all necessary hardwares as required for fixing, including

cutting, bending, welding, drilling, bolting etc. as per design as required and painted with

one coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required for

fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth

strips complete as per specifications, as required and as below.

8.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes, tap off boxes and

cross over as per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

a) MR 300 mm wide x 38 mm deep raceway RM 10.00 2,503.77 25,037.68

b) MR 225 mm wide x 38 mm deep raceway RM 10.00 2,108.01 21,080.15

c) MR 150 mm wide x 38 mm deep raceway RM 75.00 1,600.04 1,20,003.25

d) MR 100 mm wide x 38 mm deep raceway RM 50.00 1,156.27 57,813.36

Providing and fixing 400 x 400 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 3,35,781.98 49,915.00

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

Sr. No 2022. Description Unit Qty Unit Rate DSR Total amount

Sr. No 2022. Description Unit Qty Unit Rate DSR Total amount

7 IP BASED CCTV SYSTEM

7.1 1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

including painting in case of surface conduit,or cutting the wall and making good the same in

case of recessed conduit as required

7.2 MR Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm wide angle fixed lens IR

Dome Camera 1/3" Progressive Scan CMOS; H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux

@(F1.2, AGC ON), 0 lux with IR; 25fps/30fps(2560×1440, 1920×1080); 3 VCA functions; 3 streams; 3D

DNR; ICR; EXIR 2.0, up to 30m; DC12V&PoE; Built-in micro SD/SDHC/SDXC slot.

7.4 MR Supply, installation testing and commissioning of Network Video recorder Linux based to manage

and control all the cameras from control room. Software shall support maximum 32 channel with

joystick controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 4 SATA Interfaces, alarm I/O:

16/4, 1.5U case,19" with 4x6TB i.e. 24TB HDD inside Nos. 1 Rs. 1,27,957 Rs. 1,27,957

7.5 MR Supply, installation testing and commissioning of Network Video recorder 16-Ch, 8 SATA interface,

2U, H.265 & 4K, Dual Network interface, RAID 0,1,5,6,10,16 X 1080P, 8X 4MP, 4X 4K, 320 MBPS.with

4x6TB i.e. 24TB HDD inside Nos. 1 Rs. 32,047 Rs. 32,047

7.6 MR Supply, installation, testing and commissioning of Video Management software enabling security

related personnel to easily and remotely gather video evidence, monitor live situations, and

configure and maintain a video surveillance system over Ethernet consisting of digital video

recorders (DVRs), hybrid digital video recorders, network video recorders (NVRs), analogue video

cameras, and IP video cameras should support Detachable Viewers –users have the ability to

detach Viewer panels and move them to other (or the same) monitor(s). A maximum of two (2)

Viewers can be detached for a total of 75-up video tiles [two (2) detached and one (1) core

Viewer. Nos. 1 Rs. 25,648 Rs. 25,648

7.7 MR Supply Installation Testing & Commissioning of 21 inch Full HD LED monitor including wall mount

brackets/ clamps/ desk mounting stand. Nos. 1 Rs. 6,879 Rs. 6,879

7.8 MR Supply and fixing of RJ45 Connector Nos. 12 Rs. 363 Rs. 4,356

7.9 MR Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face plate

complete as required. Nos. 12 Rs. 90 Rs. 1,080

7.10 MR Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6, Termination of

Catergory-6 UTP Cable, UL listed, Shall conform to Category-6 as per the EIA/TIA-568C.2, Shall

support network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and

strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius

of the cable, Shall have minimum durability of 750 mating cycles and 200 termination cycles. Shall

be certified by independent labs like ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall

be fixed in existing box & cover plate in wall/furniture/floor complete as required.

7.11 MR Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring shuttered

front access for preventing ingress of dust, dimension as per commercially available modular office

furniture. Nos. 12 Rs. 85 Rs. 1,021

7.13 MR Supply & Laying in existing conduits/raceway/furniture of 4-pair Unshielded twisted pair cable with

a cross filler (+), meeting Category 6 standards as per TIA-568C.2. The cable shall be tested till 600

MHz or more from independent laboratories like ETL for 4 connections. Test Certificate from

independent labs like ETL shall be required. RM 425 Rs. 30 Rs. 12,899

Digitally signed by AMIT

SINGH 17:27:36 IST

7.14 MR Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO Jacks

(RJ45, TIA-568C Category-6), having integrated bonding bar or other mechanism for grounding,

loaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2.

Shall be 6 port module construction for better cable dressing at the rear. The jacks shall have RJ-45

type connector with bend limiting and strain relief boot for securing IDC contacts from external

forces and for maintaining the bend radius of the cable.

7.15 MR Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design flexibility with a clear strain relief

boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 2 Meter. Nos. 12 Rs. 215 Rs. 2,576

Digitally signed by AMIT

SINGH 17:27:36 IST

7.16 MR Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design flexibility with a clear strain relief

boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 1 Meter. Nos. 12 Rs. 110 Rs. 1,322

7.17 MR Supply Installation Testing & Commissioning of Managed Layer -2 Switch with Power on Ethernet

(PoE) enabled, 24 Port Fast Ethernet Web Smart Switch, including 2 Gigabit BASE-T and 2 Gigabit

Combo BASE-T/SFP. Nos. 1 Rs. 12,484 Rs. 12,484

TOTAL OF IP BASED CCTV SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 3,65,535 Rs. 1,02,400

20 kVA UPS with 15 minute backup

Supply, unloading, shifting, installation, testing & commissioning of micro processor controlled

following 20 KVA UPS capable of operating in parallel redundant mode so that if any one UPS fails

the other can supply 100% load, IGBT based rectifier to achieve input THDI < 4% and input power

9.1 MR factor of greater than 0.99 at 100% loading with 3 level Inverter Topology. True Online Double set 1 6,68,367.75 6,68,367.75

Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology , 3 Phase input and 3 phase

415 V output UPS system; and comprising of the following complete as required and as per

Fully rated Rectifier cum charger unit and 100% rated Invertor unit Integrated in UPS module.

Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the

static bypass line integrated in UPS module.

Web-enabled Monitoring and Management through SNMP protocols for multi-OS environments

with below features.

Giving notifications like e-mail, paging notification, broadcast notification, battery replacement

notification, run event-based scripts.

Event logging, data logging and action logging (with date, time, description of fault and event).

Fully rated Inbuilt Maintenance Bypass Switch for the continuous operation of the load during

Local notification through audible alarm.

Fully rated Battery Circuit Breaker with under voltage coil & deep discharge protection to the

One time cost of replacement of PCBs to be considered, in case conformal coated PCBs are not

(Vendor to specify the cost considered)

Battery Banks comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries of

minimum 5years design life to provide 15 minutes backup at 20kVA ,0.9PF, ECV=1.7V with each UPS.

Minimum VAH required with each UPS 11232 VAH .The batteries shall be installed on shelves of rack

for quick replacement and servicing. The temperature sensor shall be provided in the battery

section for temperature compensated charging. The bank of batteries shall comprise of required

numbers of batteries connected in series.

Vendor to provide complete details of make of Batteries, ampere hour ratings, no. of Batteries,

Expected life, Final discharge voltage, Nominal float voltage, Battery recharge time &

configuration of back up time, Battery sizing Calculations

Digitally signed by AMIT

SINGH 17:27:36 IST

Supply, unloading, installation, testing & commissioning of open type MS racks including top fully

cover to protect from falling object to house SMF batteries for 30 kVA UPS system along with

suitable interconnecting links, moulded case circuit breaker having Ithermal, Imagnetic &

automatic U/V trip mechanics for Battery Banks etc. complete as required & as per specifications.

UPS Testing with External Load Banks (To be provided by vendor) for 8 hours at full load shall be

included in the offer incase Phantom Loading feature as specified in the data sheet is not

available in the UPS.

Supply, laying, testing & commissioning of flexible single core copper cable for interconnections

between UPS to UPS, UPS to batteries( 10 m) , complete as required for each UPS.

Supply, laying, testing & commissioning of flexible single core copper cable for

interconnections between UPS to UPS, UPS to batteries, complete as required for 50 kVA

TOTAL OF UPS & INVERTER SYSTEM CARRIED OVER TO SUMMARY Rs. Rs. 6,68,368 Rs. -

Digitally signed by AMIT

SINGH 17:27:36 IST

ESTIMATED COST FOR ACCESS CONTROL SYSTEM

11 ACCESS CONTROL SYSTEM

Supply, Installation, Testing & Commissioning of Access Control System with RFID, Figure Print and Pin Authenication with 3,000 Fingure Print

1 Capacity, 10,000 Card Capacity, 50,000 Transaction Log Capacity, Built In Buzzer, 128X64 OLED Display, 3x5 Keypad and Bells, Weigand Nos. 2 51,486.23 1,02,972.46

Output, USB, TCP/IP Network Interface, IP 65 Weatherproof.

Supply, Installation, Testing & Commissioning of 2 Door/ 2 Reader IP Controller accommodates a card database of 55,000 cards, and a

transaction buffer of 45,000 transactions,TCP/IP, USB, Serial Interface unit, Relay Switching Port.

3 Supply, Installation, Testing & Commissioning of Proximity Cards. Nos. 100 322.63 32,263.22

Supply, Installation, Testing & Commissioning of Electromagnetic Lock 600 lbs, single leaf, LED Status Display, includes Door Sensor, i/c making

conection, integration, testing etc. complete as required on site

Supply, Installation, Testing & Commissioning of Power Supply 12V 2 A for Access Control Reader and Door Lock Unit, Complete in all respect

as required at site.

Supply, Installation, Testing & Commissioning of Alagtech U/L Clamp made of aluminium anodised for EM Lock on the surface of

frame/structure etc. i/c alignment etc. for smooth operation of EM lock etc.

Supply, Installation, Testing & Commissioning of 24 Port Gigabit Switch, Auto MDI-MDIX for all port,Link Status Detection, 4.8 Gbps Switching

Capacity, Rack Mountable, Complete in all Respect as required at site.

Supply, Installation, Testing & Commissioning of Access Control Software for with Advance Access Management Module & Advance

8 Attandence Mangement Module. It should support Multi company, Multi location, Multi department, Multi login with different rights, Muti Nos. 1 76,384.63 76,384.63

hierarchy of employee.

Total of Access Control System carried over to summary 3,86,626.27

Digitally signed by AMIT

SINGH 17:27:36 IST

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

DSR Total NDSR Total DSR

Sr. No Description Unit Qty Unit Rate

2018.No. amount amount

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including detectors) and minimum 120

detectors per loop and loop length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-

up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have

facility to connect printer to printout log and facility to have seamless integration with

analog/digital voice evacuation system (which is part of the schedule of work under SH: PA

System) and shall be complete with all accessories . The panel shall be compatible for IBMS

system with open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

3 17.2.9 rate of rise cum fixed tempreature thermistor complete with base as required. Pcs 1.00 2,713.00 2,713.00

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

7 17.2.5 having two LED, metallic cover complete with all connections etc as required. Pcs 15.00 263.00 3,945.00

Supply, installation, Testing & Commisioning of Conventional type Horn / Strobe wall mounted

type rated at 100 ± 5 DBA @ 1m for Audible annunciation,Fire Sires Sound ,ABS -

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

1 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as RM 600.00 141.00 84,600.00

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3

1 17.3.1 player (including 6 zone button paging station) with seamless integration facility with main fire Pcs 1.00 1,26,399.00 1,26,399.00

alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms

operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt

in ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Digitally signed by AMIT

SINGH 17:27:36 IST

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

1 17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections

and interconnections etc. as required.

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 375.00 51.00 19,125.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

Project - Boardroom and Mini Board Room Qty Unit Rate Amount

S. No. Function Tender Specifications

Supply, Installation, Testing & Commissioning of 4.5-inch, 2-way, Full Range, Ceiling-

mount loudspeaker. Frequency range - 70Hz-16kHz, Rated Power - 16Watts,

Sensitivity-89 dB SPL, Coverage Angle (-6 dB)-140° (500 Hz to 5 kHz), Maximum SPL

1.1 Ceiling Speakers Continuous/Peak-101dB/107dB, Rated Impedance - 8 Ohms. Transformer Tapping - 12 Nos 54,144 6,49,723

70V/100V(16, 8, 4,2 watts).Material - Painted ABS polymer Baffle and Power coated

steel grille. Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile

Supply, Installation, Testing & Commissioning of Quad channel class-D amplifier.

Power - minimum 100 watts/channel @8Ω/4Ω or better. Should support

70V/100V.Should have Power sharing between channels or Bridge/Parallel mode to

combine a pair of channel for maximum output . Signal to Noise ->100 dB or better,

1.2 Amplifier for Ceiling Speakers 2 Nos 2,66,076 5,32,152

Frequency Response-20 Hz - 20 kHz or better, Input Impedance->10 kΩ (balanced &

unbalanced) or better, Front Panel Indicators-Power, per channel Signal,

Protect/Limit etc. Better to have Energy Star rating for power saving. Shall include

rack and surface mounting brackets.

Supply, Installation, Testing & Commissioning of Digital Signal Processor with

minimum 16 Mic/Line Inputs and 8 Line Outputs. AEC Channels - minimum 16

assignable & routable with minimum tail length of 200ms. Minimum 8x8 Dante

channels and support for up to 128x128 Network audio channels via Dante or

AES67. SIP Softphone integration for Audio conferencing and 16x16 USB Audio

1.3 Digital Signal Processor 2 Nos 8,84,860 17,69,720

channels supporting AV USB Bridging for software or web based conferencing

applications. The processor shall also have minimum 24 bit-A/D-D/A converters, 48

kHz Sample rate,Frequency response of 20 Hz to 20 kHz or better. 2xEthernet,

RS232 & GPIO ports for Third party device control. Third Party control can be added

as software license or Hardware (i.e., Crestron/Extron) to fulfill the requirement.

Supply, Installation, Testing & Commissoning of Wired Table Top boundary

microphone. Pickup pattern - Cardioid/Half-Cardioid. Programmable microphone

1.4 Boundary Microphone button for PTT, PTM, Toggle on/off, Permanent on and a two-color LED ring as a 19 Nos 59,559 11,31,614

status indicator. Nominal Imprdance - 200Ω, Frequency Response - 40 Hz – 20 kHz,

Max SPL-140 dB.

Supply , Installation , Testing & Commissioning of Wireless Handheld Microphone

set: having Dynamic cardioid or better polar pattern, 40 MHz or more switching

Bandwidth, Should have Signal to noise ratio >108dBA or better, Total Harmonic

1.5 Wireless Handheld Microphone Set 1 Nos 1,22,982 1,22,982

Distortion should be <0.9%, Frequency Response: 80 to 18000Hz or better, RF

Sensitivity: < 2.5 μV at 52 dB(A), Should have RF Power of 30mW or more, Should

have mute/unmute button, Operating time: up to 8 hours or better

Digitally signed by AMIT

SINGH 17:27:36 IST

Supply, Installation, Testing and Comissioning of 98" 4K UHD (3840 x 2160)

professional LED display With Built-in Android Signage Player, UHD upscalling min

2.1 Display - Main 500 nits brightess or better, Contrast ratio: 4000:1, Aspect ratio: 24:7 Commercial 1 Nos 19,33,696 19,33,696

grade, Viewing angle: 178° h/v Ports: minimum 2xHDMI, 1 x USB, RS232, LAN

Control, lifetime CMS license for the content to play during its ideal time.

Supply, installation, testing and commissioning of 86" Commercial display built in

Android OS, Native resolution 4k 3840x2160, Plug and play display with tempered

glass, alndscap and portrait orientation capability having display area minimum

1428mm x 807mm , brightness of 450 cd./sq.m,Contrat Ratio of 4000:1 minimum ,

display lifespan of minimum 70,000 hours, having built in PCARM Quad-core Cortex-

2.2 Display - Main A53 1.4GHz,2GB DDR3,16GB, Wifi and LAN, operating temperature of 0 °C to 50 °C, 1 Nos 11,60,217 11,60,217

Storage Temperature of -30°C to 60°C, with OEM warranty for 3years, USB x 2 Rear

Inputs, HDMI-In x 2, Audio In, USB x 2, TF Card, RS232 input, 24/7 commercial panel

temperature control fanless system for 0 °C to 50 °C , built in speaker 5wx 2 ,

8ohms, with built in Android signage player and lifetime CMS license for the content

to play during its ideal time.

Supply, Installation, Testing and Comissioning of 55" 4K UHD (3840 x 2160)

professional LED display With Built-in Android Signage Player, Toughened Glass,

UHD upscalling min 400 nits brightess or better, Contrast ratio: 4000:1, Aspect ratio:

24:7 Commercial Grade, Ports: minimum 2xHDMI, 1 x USB, RS232, LAN Control

Supply, Installation, Testing & Commissioning of suitable MS wall bracket for

2.4 Display Mount 5 Nos 66,209 3,31,046

bracket for LED Display mounting with standard accessories.

VIDEO,SWITCHING & INTERFACE SYSTEM

Supply, Installation, Testing & Commissioning of 1G HDMI Video Encoder. Inputs- 3

HDMI capable of streaming of 3-HDMI sources simultaneously.Resolution-upto

4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO, Audio

3.1 HDMI Encoder Inputs, Audio Output & USB port for HID Signal transfer. Content Protection: HDCP 1 Nos 6,18,783 6,18,783

2.2 compliant, EDID Managament. Dante/AES67 Audio Support.Mounting

accessories includedIf Encoder is capable of streaming only one input, match the

qty as per the requirement (6 Inputs).

Supply, Installation, Testing & Commissioning of 1G HDMI Video Decoder. Outputs-

2 HDMI capable of scaling and outputting 2 streams simultaneously.Resolution-upto

4K60 4:4:4, Power - PoE and AUX PSU. Ports Connections - RS232, GPIO, Audio

3.2 HDMI Decoder Inputs, Audio Output & USB ports. Content Protection: HDCP 2.2 compliant, EDID 1 Nos 6,18,783 6,18,783

Managament. Dante/AES67 Audio Support.Mounting accessories included. If

Decoder is capable of decoding only one stream, match the qty as per the

requirement(2 outputs).

Supply, Installation, Testing & Commissioning of Cable Manager with wireless

3.3 Cable Manager for Table charging spot, table mount modular multi-Connection Solution with retractable Lid 1 Nos 59,551 59,551

with cable pass through for 1 HDMI, 2 LAN, 2 Universal AC Power Outlet, etc.

Digitally signed by AMIT

SINGH 17:27:36 IST

Supply, Installation, Testing & Commissioning of Wireless Content Presentation,

Collaboration, and Conferencing Solution, Wireless content sharing and

collaboration applications, Optimized for video conferencing using room

3.4 Wireless Presenter 1 Nos 4,56,352 4,56,352

peripherals, Local video streaming output to large displays, Wireless sharing from

Miracast™ and AirPlay™, Powerful security features, Switched enabled wired input,

Centralized cloud management and control

Supply, Installation, Testing & Commissioning of HDMI Matrix Switcher 4x4, 4k 60

Hz with Deambbeded Audio

VIDEO CONFERENCE SYSTEM

Supply, Installation, Testing & Commissioning of Network PTZ Conference camera

with 20x optical zoom & 60-degree horizontal coverage. Low Noise CMOS 4K image

sensor with User-configurable resolution and quality for IP streams (up to 1080p).

HDMI resolutions up to 4K30 and SDI-3G resolution up to 1080p60. Image rotation

4.1 Network Conferencing Camera -Main controls to allow for inverted mounting using ceiling bracket. Minimum Illumination 1 Nos 10,85,963 10,85,963

- 0.5 Lux @ (F1.8, AGC ON), Horizontal Rotation Range - ±170°, Vertical Rotation

Range - -30° to +90°, White Balance controls- Auto, indoor, outdoor, one-push,

manual, specified color temperature. Power – PoE & AUX. Wall mounting bracket

Supply, Installation, Testing & Commissioning of Network PTZ Conference camera

with 12x optical zoom & 80-degree horizontal coverage. Low Noise CMOS 4K image

sensor with User-configurable resolution and quality for IP streams (up to 1080p).

HDMI resolutions up to 4K30 and SDI-3G resolution up to 1080p60. Image rotation

Network Conferencing Camera controls to allow for inverted mounting using ceiling bracket. Minimum Illumination 1 Nos 6,96,130 6,96,130

- 0.5 Lux @ (F1.8, AGC ON), Horizontal Rotation Range - ±170°, Vertical Rotation

Range - -30° to +90°, White Balance controls- Auto, indoor, outdoor, one-push,

manual, specified color temperature. Power – PoE & AUX. Wall mounting bracket

Supply, Installation, Testing & Commissioning of Software or Hardware based

5.1 Control System control system with required perpetual license and accessories to control room 1 Nos 5,32,153 5,32,153

equipemnts mentioned in this BOQ.

Supply, Installation, Testing & Commissioning of High Definition, Multi-touch Touch

Screen Controller with 24-bit color display. Viewable Screen Dimensions (diagonal)

5.2 Touch Panel – 7-inch, Resolution - 1280 × 800, Brightness - 400 Nits, Aspect ratio – 16:10, Power 1 Nos 4,64,086 4,64,086

– PoE, Mounting – Wall and Tabletop, Orientation - Vertical / horizontal.

Configurable LED’s on both side. Ambient Light Sensor, Proximity Detection.

Supply, Installation, Testing & Commissioning of 24 port L2 Gigabit POE+ Network

Swicth with Multicast support with IGMP V1/V2, QoS support, IPV4/IPV6 Support,

5.3 Network Switch 1 Nos 1,93,369 1,93,369

Switching Capacity in Gigabits per Second, 1 Gbps Non-blocking ports with standard

CABLE, CONNECTORS, ACCESSORIES

6.1 Supply, Installation, Testing & Commissioning of 18Gbps 9-feet HDMI Cable. 6 Nos 23,204 1,39,223

6.2 HDMI Cables Supply, Installation, Testing & Commissioning of 18Gbps 6-feet HDMI Cable. 6 Nos 18,564 1,11,383

Digitally signed by AMIT

SINGH 17:27:36 IST

6.3 Supply, Installation, Testing & Commissioning of 18Gbps 3-feet HDMI Cable. 10 Nos 13,923 1,39,230

Supply, Installation, Testing & Commissioning of 2 core 2.5 sqmm PVC Sheathed

6.4 Speaker Cable 285 Mtrs 928 2,64,566

loudspeaker cable.

Supply, Installation, Testing & Commissioning of 2 core shielded balanced

6.5 Microphone Cable 360 Mtrs 619 2,22,792

microphone cable.

Supply, Installation, Testing & Commissioning of Cat7 Cable for AV Network

6.6 CAT7 Cables 600 Mtrs 87 52,354

Preparation of complete set of shop drawings including finishing, MEP

services, details, design calcualtions etc. and any other details as and

when desired by Engineer In charge /client. A qualified professsional for the

purpose shall be appointed after due appproval from Engineer In-Charge

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 89,536.04

B WATER SUPPLY 50,184.00 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 37,996.70 5,750.00

D SPRINKLER PIPING & ACCESSORIES 24,151.00 98,590.39

Total Cost ( Carried Forward) in Rs. 3,06,208.13

Digitally signed by AMIT

SINGH 17:27:36 IST

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing glazed vitreous china single trap syphonic

pattern having back inlet ,supporting chair ,wall hung water

closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European type)

water closet with seat and lid, with C.P. brass hinges and

1.1 rubber buffers, adapter, rubber joints fixed to W.C., C.P.

brass screwed washers including cutting and making good

the walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete

in all respects

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 23,281.24 23,281.24

Providing & fixing glazed vitreous china wash basin with R.S.

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P.

brass bottle trap and union 32 mm dia C.P. pipes to wall

flange. complete including cutting and making good the

NS walls wherever required.

1.3.1 Undercounter wash basin (White colour)of size: 585x430 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 8,116.05 8,116.05

Providing & fixing 15mm C.P. brass single hole wash basin

1.4 mixer without popup waste system with 450mm long copper

NS pipes and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 4,272.92

Providing & fixing toilet paper holding including cutting and

1.8 NS making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 2,003.42 2,003.42

Digitally signed by AMIT

SINGH 17:27:36 IST

Providing & fixing Horizontal liquid soap dispenser with

1.9 stainless steel lid and brackets fixed to wooden cleats with

NS C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 3,554.69 3,554.69

Providing & fixing C.P. brass coat hooks fixed on toilet door

1.10 NS with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 619.55 619.55

Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

1.11 ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as

NS per design including polishing

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Sqm 4 2,488.70 9,954.79

1.12 Providing & fixing Hand Shower (Health Faucet) with 8mm

NS dia, 1M long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 1 1,735.47 1,735.47

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 19,059.85 19,059.85

Providing & fixing wall mounted 25 mm dia Stainless steel

1.15 coated grab bar including cutting & making good the

NS walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 1,017.06 1,017.06

Providing & fixing 15 mm dia C.P. brass bib cock with Hose

1.16 NS union of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 1,392.67 2,785.34

Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

1.17 NS wall flange of approved quality.

Digitally signed by AMIT

SINGH 17:27:36 IST

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 2 1,564.87 3,129.74

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and

'C' size battery (2 Nos) for operation fixed to wooden cleats

NS with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 4,494.66 4,494.66

Providing and fixing of stainless steel finish Paper Towel

1.19 Dispenser having capacity of 300-350 paper towels fixed to

NS wooden cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 5,511.26 5,511.26

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures

i. shall be selected by Architect/Interior designer/Project

manager and the same shall be binding for execution.

No additional fixing cost shall be paid for change in type of

sanitary fixtures.

Contractor to receive all the above mentioned items & store

at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 89,536.04

Digitally signed by AMIT

SINGH 17:27:36 IST

SUB HEAD B: WATER SUPPLY

SL. DSR - DSR Rate NS Rate

DESCRIPTION OF ITEMS UNIT Qty Amount Amount

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water

supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.

18.8 This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the the same including testing of joints complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 45.00 513.75 23118.75

18.8.3 25 mm nominal outer dia pipes. Metre 25.00 626.05 15651.25

18.8.4 32 mm nominal outer dia pipes. Metre 10.00 712.75 7127.50

2 18.16 Providing and fixing brass stop cock of approved quality complete.

18.16.1 15 mm nominal bore Each 2.00 303.85 607.70

18.16.2 20 mm nominal bore Each 2.00 327.95 655.90

3 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

18.17.2 32 mm nominal bore Each 1.00 589.90 589.90

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming

4 to I.S:8931 a) 15 mm nominal bore.

18.53.1 15 mm nominal bore Each 4.00 500.35 2001.40

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of approved quality

18.74.2 15mm nominal bore with 45cm length Each 4.00 107.90 431.60

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 50184.00

Digitally signed by AMIT

SINGH 17:27:36 IST

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down

or hinged grating with or without vent arm complete, including cost of cutting and

1 making good the walls and floors.

17.60.1.1 100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as per IS 3989. Each 1 1,604.10 1,604.10

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 15 1,077.40 16,161.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 5 1,042.20 5,211.00

Providing and fixing single equal plain junction of reqd. degree with access door,

3 17.43 insertion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 1 731.40 731.40

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 1 573.80 573.80

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 1 707.30 707.30

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 1 498.90 498.90

Providing and fixing bend of required degree with access door, insertion rubber washer

5 17.38 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 1 597.60 597.60

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 1 453.40 453.40

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 1 439.75 439.75

Digitally signed by AMIT

SINGH 17:27:36 IST

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 1 298.20 298.20

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 1 439.75 439.75

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 1 271.45 271.45

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe

embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement

: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting

8 17.37 holes and making good the walls etc.

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and

fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer

9 17.65 (of approval quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 15 69.55 1,043.25

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 5 52.90 264.50

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos. G.I. Socket 32 & 40

10 NS welded G.I. pipe and dipped in hot bitumen complete in all respect.

100 mm diameter pipe (Hopper ) Each 5 1,150.00 - 5750.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes & fittings

11 17.58 of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement mortar 1:2(1 cement: 2

12 17.36 fine sand) in SCI/CI pipes.

13 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 2 841.10 1,682.20

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 37,996.70 5,750.00

Digitally signed by AMIT

SINGH 17:27:36 IST

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

SL. DSR - DSR Rate NS Rate NS Amount

DESCRIPTION OF ITEMS UNIT Qty Amount

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's

specifications.

4.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 2.00 13,814.09 27,628.17

4.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 2.00 3,121.66 6,243.32

4.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 8.00 2,776.86 22,214.86

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with

required accessories :

5.4 21.4 Concealed Sprinkler NOS. 130.00 1,397.00 1,81,610.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on

reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male

thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of

following sizes complete as required.

Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as

base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with

proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts as diercted by Engineer-in-charge

Providing, jointing and testing of automaticaly operated Halotron fire extinguishers(cap-5kg,temperature rating-68degc,test

pressure-30bar) complete with all accessories/fittings. NOS. 1.00 16,423.69

TOTAL CARRIED TO SUMMARY 24,151.00 98,590.39

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar,

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

2 Masonry & Plaster

3 Paving, Flooring & Wet Works

4 Partitions & Wall Cladding

7 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 1,17,56,107.05

GRAND TOTAL (Carried Forward) 1,17,56,107.05

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

CIVIL & INTERIOR WORKS

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a

2.1 11.3 floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 777.00 545.00 4,23,465.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 87.00 1,018.05 88,570.35

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

2.4 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

2.5 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings,

balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five

level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size).

2.7 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

2.8 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 17.00 608.35 10,341.95

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding

all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 68.00 89.65 6,096.20

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over

cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of

cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This

2.11 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with SQM 8.00 516.60 4,132.80

water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of

all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and compacting Foam Concrete for raising

2.13 MR level of toilets and pantry and finishing in a coat of lean concrete screeding with waterproofing compound CUM 3.00 5,606.75 16,820.25

complete in all respects to take Tile Flooring as per flooring specifications.

SUB TOTAL OF MASONRY AND PLASTER 6,04,507.21 55,236.79

3 PAVING, FLOORING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

3.1 8.31 green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 SQM 40.00 1,063.45 42,538.00

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg Digitally signed by AMIT

per sqm, including pointing in white cement mixed with pigment of matching shade complete.

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey

3.3 11.41A cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently

b 11.41A.2 Glazed vitrified floor tiles polished finish of size

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

3.4 11.40 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement SQM 200.00 1,225.10 2,45,020.00

Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the

joints with white cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic

3.6 MR coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting

and finishing complete as per direction of Engineer-in-charge.

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite stone top

(with straight edge polished nosing) complete with base cabinet made of 20mm BWP board, outside

surface (shutters) finished in 1mm thick Laminate of approved shade. All internal surfaces to have balancing

laminate. The rate inclusive of necessary hardware, handle lock sets, self closing hinges, spring loaded

shutter, latch inside, all cabinet hardware complete as per Architects approval. (BR of stone to be taken as

Rs 1600/Sqmt). Width of work top counter 600mm/ detailed drawings.

Carpet- Supply and installation of modular carpet (including skirting) of approved model and shade and

made with 100% nylon 6/6.6 tufted textured tiles of minimum 500mm x 500mm in size, stain resistant, anti

microbial, and having colour fastness to water, fastness to light, rubbing fastness and castor chair suitability

as per relevant standard for heavy commercial usage, with 100% PVC free Wellbac Function Backing with

having average density 6000 oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile weight – 16-18

oz/ sq yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content complying to

GRIHA requirement, including fixing with GRIHA compliant adhesive of approved make, minimum 15 years

manufacturer's warrantee, all complete as per drawings, manufacturer's specifications.

Providing and Fixing of floor tiles with wear layer is of 0.5mm, made up of Stone Polymer composite, 100%

Water & Termite proof, Scratch/ Flame/ UV resistant, anti-microbial, 100% recyclable Green product having

click system with suitable skirting. Classification of abrasion resistance (Abrasion wheelfromH-18 Calibrade,

loadApplied 1000 grams, No. of Cycles 14,400). " ( Along with Matching Profiles)

TOTAL FOR PAVING & WET WORKS 9,90,684.00 11,69,639.95

4 PARTITIONS AND WALL CLADDING

Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel

50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing

of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

4.1 9.105 fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a

spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of

partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450

mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal

joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing

to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25

mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification

and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG)

plaster board conforming to IS: 2095:

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using board of

required thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm and two

flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one

flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.

4.2 9.133 Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully

threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head

screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-incharge, the joints of the

boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide

seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with anodised

Aluminium frame fixing glass with snap on option consisting of top, bottom and side frame measuring 40-

46mm x 18mm-25mm complete with glazing rubber as per manufacturer's specifications and instructions of

4.3 MR Engineer- in-charge. Rate include supply & Installation of 12 mm thk toughened glass with double sided SQM 70.00 5,584.34 3,90,903.58

adhesive tapes for glass to glass butt joints. Partition system from FFL to False Ceiling level, inclusive of cost of

support required for fixing in the ceiling. The frame to be powder coated in desired shade as per the

instructions of the Architect.

PARTITIONING- Partition using 12mm HDHMR board fixed on both sides on aluminium Studs Frame 50mm x

4.4 MR 50mm x 1.5mm & 50mm x 60mm x 1.5mm as per approved sample and architectural drawings placing SQM 325.00 3,113.62 10,11,927.65

the same 600mm c/c . Aluminuim frame to be fixed to floor and RCC Ceiling using fastners.

PANELLING- Panelling using 12mm thick HDHMR board fixed on one side on Aluminium Frame 50mm x 25mm

4.5 MR x 1.5mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor SQM 110.00 3,978.32 4,37,614.92

and RCC Ceiling using fastners.

4.6 MR Cladding using 12mm thick HDHMR board on existing frame/ surface. SQM 10.00 1,148.57 11,485.74

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved design and

4.6 MR shade , cladded on to existing partitioning. Complete Cladding to be finished using mellamine polish SQM 146.75 3,978.32 5,83,824.06

(gloss/matt) as approved by the architect. (base rate Rs. 1450/- sqm)

4.7 MR LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood surface. SQM 554.00 1,453.97 8,05,501.97

Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183,

having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel

plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-

Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and

length 2400 mm or as specified by the Architect/ approving engineer, made of a high density fibre board

with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and

a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where

the visible surface has a “Helmholtz” fluted perforation of 3mm width and 5mm/13mm/21mm of visible

panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation.

The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of

0.52-0.63. The panels shall be mounted on special aluminium splines using clips. The works to be done

complete as per drawings and satisfaction of engineer-in-charge.

Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 9 mm

thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A

4.10 MR as per ASTM E-84, fabric as per the selection of the Architect of approved size providing a minimum sound SQM 20.00 4,526.34 90,526.79

absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers and construction adhesives as

per the instructions laid down by the manufacturer.

Making and fixing in place designer partition made by using CNC router cutting of slats of 18mm thick birch

ply. The partition to be fixing on floor and ceiling using hardwood of required section. The cost to include

finishing using sealer and clear coat of melamine. The Works to be done as per the detail drawings and as

per instructions of the architect. (Surface area of Birch ply to be measured for payment).

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded

wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade

I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be

painted with polyurethane primer (fittings to be paid separately).

Cabinet Carcass- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or

based on graded wood particle board IS : 3087 marked, with one side decorative and other side balancing

9.18.2 lamination Grade I, Type II exterior grade IS : 12823 marked, in cabinet carcass with screws and fittings

wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick complete with all necessary nails,

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of

approved quality including necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc.

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer

particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one

4.16 9.129 side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 SQM 15.00 1,982.70 29,740.50

mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as

per direction of the Engineer-in-Charge

Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 19mm

Commercial Plybaord finished in 1mm Laminate of base cost Rs. 380 per sqmt. Shutters to be fixed to a

frame. Rigidly fixed on both sides and top finshed in laminate. No internal carcass required. All Hinges of

hettich or equivalent. Internal Surface of the shutter in balancing white laminate. All shutters to be provided

with Stainless steel louvers at the top and bottom of the shutter as per the site requirements and instrcution

of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 1,84,687.75 35,55,125.47

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

5.1 12.45 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of

10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of

the Engineer in Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 571.00 1,145.95 6,54,337.45

300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of mineral fiber ceiling tiles, with hot dipped

galvanized steel grid work (Silhotte) , surface chemically cleaned capping pre-finished in baked polyester

paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre to centre to form a grid of size

1200 X 300 mm and suspending the grid from RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J

bolt at every 1200 mm intervals. And laying mineral fiber Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20

OCR mm over the formed grid having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of

> 85%. Noise Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity

Resistance up to 99% at 50’C. The grid to be used is Silhoutte type as per approval of the architect

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan "pre-laminated board with

5.4 MR hardwood framing, dead locks, lapping all around including all hardware, hinges etc. complete as per SQM 3.00 1,09,402.19 3,28,206.56

design and drawing.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings

5.5 MR hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm RMT 48.00 1,033.59 49,612.29

thk. Commercial ply on horizontal surface (straight & curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing Natural Teak Veneer on

12mm Underlay commercial Ply fixed to a subframe made using 50mm X 50mm Kiln seasoned and

5.6 MR chmeically treated hollock wood fixed to RCC ceiilng using Fastners . The cost to inlcude the finishing of the SQM 72.00 6,637.82 4,77,922.71

Veneer using wood stain and clear coat of PU (Gloss/ Matt) as per the instructions of the Engineer In

Charge. (base rate Rs. 1450/- sqm)

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the

specifications same as gypsum ceiling. Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the

specifications same as gypsum ceiling.

Providing the wooden cove of 150mm x 150mm having a facia of 75mm to macth the specifications same

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum

5.9 MR ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm RMT 165.00 363.57 59,988.44

as per drawings. (visible surface of gypsum band to not exceed 100mm) including plastic emulsion paint.

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape

panels in wooden finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and

length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre

panel gap will be 100 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80

MR mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 SQM 155.00 9,249.29 14,33,640.20

m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with

special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or

ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site

dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

SUB TOTAL OF CEILING 6,54,337.45 30,75,697.23

6 DOORS/ WINDOWS

6.1 35MM THICK LAMINATED FLUSH DOOR WITH FLOOR SPRING- 35mm thick flush Doors of size upto 2400mm x

1050mm complete with Hardware including floor spring, Door Closer, dead Lock with inbuilt key, D-Handle

etc. including cost of teak lipping all around with melamine/ duco finish. The item to include installation of

all kinds of latches as per the requirement.

Supply & Installation of Single leaf anodized aluminium profile door frame of section 45-50 mm x 20-25mm

with a set of Pivot hinges with FS nut at top & bottom & Single Leaf Glazed shutter of 10mm thick

MR Toughened glass & Hard wares like H type pull handle handle 25mmx450mm , Half moon door stopper , Nos 1.00 68,147.71 68,147.71

bottom corner lock & Floor machine for self closing complete with required accessories.As the door is

frameless, the edges will be visible Size Considered 900 x 2400mm.

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other frames,

6.2 9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold

fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 0.15 1,31,576.95 19,736.54

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

6.3 9.21 decorative type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 6.00 2,015.75 12,094.50

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked

flush door shutters conforming to IS: 2202 (Part I)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be measured)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and

priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts

6.6 9.53 and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse EACH 6.00 194.35 1,166.10

sand : 6 graded stone aggregate 20mm nominal size). Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg

and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and

screws etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses & Escutcheon

6.9 MR in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder for all flush EACH 3.00 3,443.93 10,331.79

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as per IS :

1868 ), transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with necessary

screws, etc. complete.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 900x2400. with vision panel using

wired glass complete with Fire proof door frame. One side to be finished in fire retardant paint and one side

to be finished in Laminate of approved shade. All Frame to be finished in fire retardant paint. All hinges and

hardware to be thermatically sealed and 120 mins fire rated.

SUB TOTAL OF DOORS 50,824.64 4,58,034.56

7 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

surface. Water thinnable cement primer.

ACRYLIC EMULSION PAINT: Painting of wall, ceiling, POP/ plastered, Gyspum etc. surfaces with smooth and

even finish velvet touch paint of approved brand and manufacture to give an even shade. Two or more

coats on new work complete to the satisfaction of the Engineer- in -charge complete with the preparation

of the base etc.

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 10.00 142.30 1,423.00

7.4 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: SQM 20.00 131.45 2,629.00

13.61.1 Two or more coats on new work

Providing & fixing imported decorative Poly décor fabric Wall Paper (on walls and ceiling) of weight 475

7.5 MR g /sqm as per approved shade & design including prepration of surface with 2 coats of Nubin Glue based SQM 35.00 4,261.73 1,49,160.68

Digitally signed by AMIT

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top tube of 38mm diameter, powder

coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The Roller Blind fabric

should possess the below mentioned specifications with fabric made up of 85% Polyester and 15% Catonic

Polyester. Roller blinds with Solar protection fabric of high

tenacity Polyester Yarn & Fungi static Treatment and should block the light flux & offer elimination of glare

and sunlight / heat radiance. Fabric shall have visible light & solar properties. 1st weave of thickness 0.32mm

±5% (ISO 2286-2) and weighing 210g/sm±5%. Flame Retardancy as per AS301.3-1999. Fabric Protected by

teflon fabric protector for water and stain resitance. Harmful substance standard Oeko-tex standard 100.

Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium profile should have temper WP

consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile

strenghth of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit

7.7 MR engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking SQM 105.00 1,750.07 1,83,757.06

plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating

Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal.

Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a

ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch

gear ratio of 1.75:1 for reduced operating force on larger blinds.. Mounting hardware brackets universal

brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated

metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium

tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy

63400 and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless

ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-

stable compounds available white.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty

as approval of the Architect. (Only film surface area shall be measured and paid).

Reception Table:-Providing & Installation of Reception table of of size upto 2.0m x 0.75m x 0.75m/ 1.2m (ht),

made out of 19mm thk. Commercial Board finished in Acrylic Solid Surface of approved shade and colors

7.8 M.R. complete as per design. One (1) number Drawer pedestal with 3 lockable drawers and channels (all Nos. 1.00 2,25,461.35 2,25,461.35

hardware from Hettich) to be provided under the table to be finished in Solid Acrylic surface. All visible

surfaces to be finished using Acrylic solid surface as per details.

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially by

curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall)

conforming to EN 16477 standards for back painted glass , of approved color by Architect/ Client fixed with

compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of

10 to 30 mins compatible for installation of mirror and lacquered glass / Foam based double sided adhesive

tape for instantaneous adhesion, compatible with mirror and lacquered glass having Shear bond strength

7.9 M.R. (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Nos. 15.00 4,034.73 60,520.92

Mineral fibre board which is mounted on the RCC wall/any other structure. The contractor should submit test

reports for backpainted glass from manufacturer - High humidity Resistance (conforms to BS EN 1036 1999);

Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross

Hatch Test ) standard The manufactured backpainted glass should be environmentally friendly (no lead, no

arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using approved

Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per shape, pattern & details given in the

drawing. The rate includes providing & fixing beading, cutting, scaffolding, nails, all materials, labour, lead,

lifts, HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be approved by Architect).

Digitally signed by AMIT

SUB TOTAL OF FINISHES AMIT 48,973.65 SINGH 9,08,358.35

SINGH 17:27:36 IST

DSR-2022 Ref. RATE (DSR

S.No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Digitally signed by AMIT

SINGH 17:27:36 IST

Interior Fit-Out Works in The Office Space of the NPS Trust, Tower-B, 302, 3rd floor, World Trade Centre, Nauroji Nagar, New Delhi

Sno. Item Specifications Qty Rate Amount Reference Image

Supplying and placing in position Main desk of the following specifications. The Main table shall be of size 3000 Width mm x

900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished

with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile

1 chairperson Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium 1 5,22,228.94 5,22,228.94

density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished

with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The

main desk is provided eith the wire management system also there is perfect storage side unit .

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded

polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-

53cm, H-95.4cm & size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back

which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The

seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and

the armrest top. The armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and

chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced

with M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. It shsall have front Pivot synchro

2 Main Chair tilt mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee Tilt system, Seat & back 1 93,389.42 93,389.42

tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 5-position

locking with antilock back mechanism which should prevent the backrest from impacting the user when the lock is released,

Static seat depth adjustment 5.0 +/- 0.5cm with 5 position locking. The chair shall be provided with pneumatic height

adjustment which shall have stroke of 9.0 +/- 0.3 cm. The bellow should be single piece duly blow moulded in black

polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel

castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel castors

shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth

of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 128.0 to max 137.0 cms. Seat height -

min 49.9cm to max 58.9 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded

polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-

53cm, H-73cm & size of seat shall be W-54.6cm x D-49cm. High Resilience (HR) foam should be used in making seat & back

which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The

seat and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should be powder coated

in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should be made up of armrest tube, PU armrest and

the armrest top. The armrest tube assy. shall be made of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and

chrome plated. The P.U armrest shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced

with M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. The mechanism of the chair shall

have following features : 360⁰ revolving type without back tilt. The chair shall be provided with pneumatic height adjustment

which shall have stroke of 12.0 +/- 0.3 cm. The beloow should be made up of 3 piece telescopic type & injection moulded in

black polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin

wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel

castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall be, Width of Chair - 77cm,

Depth of Chair - 77 cm as measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat

height - min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Digitally signed by AMIT

SINGH 17:27:36 IST

Providing and Placing in place of 3 seater sofa of dimensions 1820mm L x 920mm D x 890mm H. Seat height shall be 470mm.

The upholstery shall be 1.2mm thickness pure leather at all touch points and 1mm thick synthetic leather at other places. The

4 Sofa 3S frame shall be made from combinaton of plywood and solid wood. Plywood thickness shall be 12mm (moisture resistant and 3 1,00,839.51 3,02,518.53

trated). Seat foam shall be slab stock foam with density super soft 32 kg/m3. Webbing shall be double webbing of S spring

and nylon belt. Legs shall be PVC legs.

Providing and Placing in place of 2 seater sofa of dimensions 1410mm L x 920mm D x 890mm H. Seat height shall be 470mm.

The upholstery shall be 1.2mm thickness pure leather at all touch points and 1mm thick synthetic leather at other places. The

5 Sofa 2S frame shall be made from combinaton of plywood and solid wood. Plywood thickness shall be 12mm (moisture resistant and 2 82,992.60 1,65,985.20

trated). Seat foam shall be slab stock foam with density super soft 32 kg/m3. Webbing shall be double webbing of S spring

and nylon belt. Legs shall be PVC legs.

Overall Size : Width : 120cm Depth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated

particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board

.Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down

.Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high

gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge

banding 1.5 mm thickness.

Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies

with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos

Overall Size : Width : 60cm Depth : 60cm Height : 49.8cm Materials : All carcass panel are made of 18 mm prelaminated

particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board

.Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down

.Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high

gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge

banding 1.5 mm thickness.

Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies

with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x

750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box

are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF

one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge

banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thickolstered with foam & leather. It shsall

have front Pivot synchro tilt mechanism. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee

Tilt system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension

adjustment, 5-position locking with antilock bac

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

9 Back Unit laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters 3 67,519.73 2,02,559.19

have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for

Digitally signed by AMIT

SINGH 17:27:36 IST

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density

=45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an armrest top. It shall

have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt

tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of

10 Main Chair polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be 3 22,679.54 68,038.61

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in

height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR

sheet chrome plated and assembled with injection moulded moulded black polypropylene hub cap. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. This shall come along a headrest assembly

consisting of polypropylene pad with lumbr support and covered with polyester fabric. Neckrest assembly has an adjustment

stroke of 4.2cm and otation adjustment stroke of 76 degrees.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon &

upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density

=45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of

8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an armrest top. It shall

have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt

11 Visitor Chair tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of 9 21,167.74 1,90,509.65

polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in

height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR

sheet chrome plated and assembled with injection moulded moulded black polypropylene hub cap. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density

32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

13 Center Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions 3 19,289.52 57,868.56

of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Digitally signed by AMIT

SINGH 17:27:36 IST

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht -

1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric

magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb +

3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of

aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle

14 board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming conduit 37 67,691.41 25,04,582.15

for passing cables. These blocks are located in the mid segment of the panels and can be provided with cutouts for

mounting switch boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The fins along the

depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size

1200mm x 600mm x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs- pedestal flat metal

front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried

out as per the instructions and guidance received from engineer incharge.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane

foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR

polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly

connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just

with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded

15 in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine 37 14,658.04 5,42,347.39

structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt

limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly

consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height

adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin

wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be

76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Main worktop shall be of size 1500mm x 600mm x 750mm. Side unit shall be 900mm x 450mm. Main worktop and Return Unit

top shall be made from 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire

management. Modesty panel shallbe made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved

shade. Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as

per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop.

managerial ws These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating.

1500 x 1500 At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment

with partitions of the height upto 50mm. Cross Members are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are

all around coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws.

There are always two cross members for one table. Soft closing access flap is used with provision for standard size of 8

module electrical (Anchor Roma) is offered. Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module

cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Made of 18mm Thick

Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2

mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with

ebco metabox slide and lock for security.

Digitally signed by AMIT

SINGH 17:27:36 IST

2Worktop shall be Made of 36mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and

having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available as per

layout. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved

shade Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels

together. Modesty panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade Edge banded with

matching 2 mm thick PVC lipping. An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder

17 coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for 24 23,701.92 5,68,846.14

electrical fittings in Straight two seater and single seater modules below access flap per seat. The table is equipped with

Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head

module, 150° head module and 165° head module. For straight two seater and single seater modules, provision to mount AV

cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow

between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal

Microphone wires running from table top to wire tray.

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood &

upholstered with synthetic leather and moulded polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D)

and that of back should be 51.8cm(W) x 75.2cm(H). High Resilience (HR) polyurethane foam should be used in making seat &

back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25%

compression.The adjustable armrests are designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height

adjustable armrest structure is chrome plated and fitted with PU moulded over metal insert fixed armrest top. The mechanism

of the chair shall have following features : 360⁰ revolving type, Single point control, Tilt tension adjustment, 4 position locking

with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort. The Back

can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast polished

Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With

castors).The twin wheel castors are injection moulded in black PP. Seat can be slide horizontaly as per user convienience.

Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of Chair - 67.5cm as

measured from pedestal below. Height from ground - min 102.0 to max 119.0cm. Seat height - min 45.0 to max 55.0cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with synthetic leather over moulded

polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x

65.7cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.The adjustable armrests are

designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height adjustable armrest structure is chrome plated and

fitted with PU moulded over metal insert fixed armrest top. The mechanism of the chair shall have following features : 360⁰

Confernece revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock feature, seat back tilt ratio 1:2,

Chair front pivot for tilt with feet resting on ground ensuring more comfort. The Back can be adjusted in 5 positions manually. Stroke

of height adjustable spine is 7 cm. The chair shall be provided with pneumatic height adjustment which shall have stroke of

10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The

pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel castors are injection moulded in black

PP. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be,

Width of Chair - 67.5cm, Depth of Chair - 67.5cm as measured from pedestal below. Height from ground - min 92.0 to max

110.0cm. Seat height - min 45.0 to max 55.0cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with synthetic leather over moulded

polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x

65.7cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The tubular frame is powder

coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a

connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Overall dimensions of Chair shall be, Width of

Chair - 57.5cm, Depth of Chair - 58.2cm as measured from pedestal below. Height from ground - 110.8cm. Seat height - min

Digitally signed by AMIT

SINGH 17:27:36 IST

The overall size of the wortop shall be 3900mm x 1200mm x 740mm. Worktop shall be made from 25mm thick MDF one side

prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access

flap provided for access to power supply and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-

laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm

21 thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The 1 1,16,745.68 1,16,745.68

product has a knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated

(DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor

Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg.

HDMI,VGA-A,etc).

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with synthetic leather over moulded

polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.6cm(W) x

65.7cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression.The adjustable armrests are

designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height adjustable armrest structure is chrome plated and

fitted with PU moulded over metal insert fixed armrest top. The mechanism of the chair shall have following features : 360⁰

revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock feature, seat back tilt ratio 1:2,

front pivot for tilt with feet resting on ground ensuring more comfort. The Back can be adjusted in 5 positions manually. Stroke

of height adjustable spine is 7 cm. The chair shall be provided with pneumatic height adjustment which shall have stroke of

10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The

pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel castors are injection moulded in black

PP. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be,

Width of Chair - 67.5cm, Depth of Chair - 67.5cm as measured from pedestal below. Height from ground - min 92.0 to max

110.0cm. Seat height - min 45.0 to max 55.0cm.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density

32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density

32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam

with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Providingin place of main table with overall size of table 1800 x 1800 x 750mm. The main table shall be of size 1800 x 900 x 750mm. The side unit

shall be 900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC

membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is

made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty

panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The

understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick

PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal

construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have

a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Digitally signed by AMIT

SINGH 17:27:36 IST

The Back Unit shall be of dimensions 1650 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade

and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided

for ease of opening. Storage is provided with lock for security.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using

Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness 16± 2

kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest

structure is chrome plated and fitted with an armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving

type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

27 Main Chair lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be 6 22,679.54 1,36,077.22

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic

height adjustment has an adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet chrome plated and assembled with

injection moulded moulded black polypropylene hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer

Incharge. This shall come along a headrest assembly consisting of polypropylene pad with lumbr support and covered with polyester fabric. Neckrest

assembly has an adjustment stroke of 4.2cm and otation adjustment stroke of 76 degrees.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using

Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =45+/-2 kg/m cube and hardness 16± 2

kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest

structure is chrome plated and fitted with an armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving

type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The pneumatic

height adjustment has an adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet chrome plated and assembled with

injection moulded moulded black polypropylene hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer

Providing and placing book shelf with specs : STRUCTURE :

The side panels are made with a combination of 18mm High Density High Moisture Resistant Fibreboard (HDHMR) and FSC-

certified seasoned Teak-Wood. The Back Panel is made of 18mm High Density High Moisture Resistant Fibreboard (HDHMR).

29 All panels are individually PU painted. The Book-shelf has a knock-down construction and assembly is done using Knock- 1 39,785.23 39,785.23

down fittings. The Bookshelf has two variants, namely, the RH Bookshelf & the LH Bookshelf.

2. MOUNTING: The Book-shelf can be mounted in either parallel to the ground or tilted at an angle of 30° to the ground. The

Back panel is provided with mounting brackets (03 nos.) for the purpose. It is mounted on the walls using Anchors.

Providing and placing planter with specs :planter has a 3-piece construction. The Outer-Shell, Inner-Pot, and Drain-Storage

Tank (Capacity 4 litres) are all made from Fibre-reinforced plastic and finished with PU paint. The Drain-Storage Tank is

connected to the Inner-Pot with Stainless Steel Bolts and Nuts. The opening from the Inner-pot into the drain-storage is

covered with strainer. This shall prevent any large solid particulates from entering & clogging the Drain- Storage Tank. The

Drain-Storage Tank can be emptied at regular intervals through an on/off valve nested in the Outer shell and connected

using a flexible hose.

Providing and placing bench with specs :• Top and side panels are made of 25mm thk Rubber- Wood (As per IS:14960)

finished with a clear matt coat of PU lacquer. The product has a knockdown construction. It is assembled using alloy steel

hardware (blackened & coated with rust preventive oil). • The Connecting Brackets are made with 3mm thk Hot Rolled Steel

Plates (HR) (As per IS:2062). They are Epoxy Polyester powder coated (DFT 40-60 microns).

Digitally signed by AMIT

SINGH 17:27:36 IST

Providing and placing orbital seat with specs : STRUCTURE The structure consists of Top & Bottom Ring made of 025.4 x 1.6thk

Round Electric Resistance Welded Tubes (ERW), and connected by Vertical Members made of 019 x 1.6thk Round Electric

Resistance Welded Tubes (ERW). The Understructure is welded together using Tungsten Inert Gas (TIG) Welding. The whole

structure is Epoxy Polyester Powder Coated (DFT 40-60 microns). The Frame rests on a base made of 18mm thk Plywood (As

per IS:303) . The Seat Base is also made of the same. Both are fixed with the understructure using welded Brackets made of

3mm thk Hot Rolled Steel Plates (HR) (As per IS:2062). It is assembled using alloy steel hardware (blackened & coated with rust

preventive oil). A 3mm Flexi-ply envelopes the tubular frame, pop-rivetted to Brackets made of 1mm thk Cold Rolled Close

Annealed Steel Sheets (CRCA) (As per IS:513) and welded onto the understructure. The Flexi-ply is covered with a layer of

12mm PU Slab-stock foam. The entire structure is upholstered with a combination of Mesh Fabric & Leatherette.

The Seat is made of 100mm PU Slab-stock Foam pasted onto a 9mm thk Plywood (As per IS:303) with a dual layered

upholstery of Mesh Fabric and Leatherette.

3. NECKREST: The Neckrest is made up of multiple layers of 12mm PU Slab-stock Foam pasted onto together and upholstered

with Mesh Fabric and Leatherette. The adjustable position and Ergonomic shape provide extra comfort.

Supplying & placing of round table of Dia 900*1020 H

WORKTOP -corian;Hardness on top surface is 2H & is made up of combination of 12mm & 6 mm thk corian & 18 mm marine

ply with 0.6 mm backing laminate;corian is made up of acrylic resin & natural minerals which makes it non prous ,non toxic ,

waterproof & seamlesswith resitance to scratches & mould. The worktop is available in Circle.

UNDER-STRUCTURE:

The under-structure consists of an InnerTube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with

Round Bottom Plate of 550 mm dia. The Inner & Outer Tube Assemblies are telescopically connected. The Top Plate is made

of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates

(HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As

per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding.

The Outer Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and

8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole

structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is

assembled using alloy steel hardware (blackened & coated with rust preventive oil).

The overall size shall be 2025(H) x 450(W) x 500(D). The add on units are stacked width wise to form a row of storage having

common side panel. The legs shall be of 45mm height and fitted with screw type leveler.The material shall be a combination

of CRDA 0.5mm and 0.8mm thickness. Each full shelf shall have a load capacity of max. 40 Kg UDL . The coating shall be of

34 full ht storage Epoxy Polyester Powder of 50 microns(± 10 microns) thickness. The wooden door shall be of size 448(W) x 18(T) x 1978 (H). It 4 47,911.19 1,91,644.78

shall be a 3 way locking door made of MDF and Honeycomb covered with decorative and backing laminate. the locking

shall self closing hinges. the handle shall be made of Mazak. 2mm thick lipping is done on all edges. It shall have Self closing

Grand Total 97,59,444.09

Grand Total 97,59,444.09

Digitally signed by AMIT

SINGH 17:27:36 IST