RE-CARPETING OF BITUMINOUS ROAD AT HASIMARA UNDER GE (AF) HASIMARA

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Scarifying or packing gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exc 50mm and n exc 100mm complete all as specified and as directed.

M & L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates (lime stone, sand stone, flint or quartzite) of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20mm size), spread rolled and consolidated to gradient and camber required with 8 to 10 ton power roller, complete all as specified and as directed.

All as per item No 1.02 here in before but except materials complete all as specified and as directed. Note:- Serviceable/ useable materials shall be obtained from item No. 1.01 here-in-before for re-use.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or by machnical means to remove all loose dirt etc complete all as specified and as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or by machnical means to remove all loose dirt etc complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with cationic emulsion primer (RS-1) @ 5.00 Kg/10 Sqm complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with cationic emulsion primer (RS-1) @ 2.50 Kg/10 Sqm complete all as specified and as directed.

M & L Bituminous premix semi dense asphaltic concrete (SDAC) 40mm consolidated thickness, with 5.5 % binder content (Paving bitumen VG-30) by wt of total mix in mechanical and hot mix plant and premixed materials laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 ton power roller/Tandem vibrator roller, complete all as specified and as directed by Engr-in-charge.

S&F retro reflector road cat eyes of size 118 x 70 x 20mm with fine grained micro glass particles of regular size with bottom portion with two shank embedded on road surfaces using epoxy adhesive complete all as specified and directed

S&F metal type Delinator, 50mm dia of height 750mm incl necessary earth work as in post holes and embedded in cement concrete 1:3:6 type C-0 and making good to disturbed surfaces complete all as specified and directed

S&F Sparkle Solar Road Studs (Bi-direction) embedded on road surfaces complete all as specified and directed.

M & L for 3 mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra crossing and the likes with thermoplastic road marking paint including applying type II glass beads dispensed from the in built dispenser unit @250-300 gms/Sqm complete all as specified and directed Note : Both the application shall be carried out by mechanical means by approved applicator of the paint including cleaning surfaces complete.)

Dismanting of brick work or stone/boulder masonry, (laid flat or or on the edge) or brick tiles in floor channels, kerbs, apron laid dry and pointed complete all as specified and directed. Note:- Segregating serviceable bricks and stack them for re-use.

M&L for continous brick edging with width equal to the width of brick laid dry on end vertically with burnt clay brick of sub class B brick old size incl necessary earth work complete all as specified and directed.

Labour only for continous brick edging (except brick) with width equal to the width of brick laid dry on end vertically brick old size incl necessary earth work complete all as specified and directed. Note:- Old bricks shall be obtained from item No. 1.13 here-in-before for re-use.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.

supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new plastered surfaces of cement concrete cornices etc and application of two coats of weather coat (exterior emulsion 1st quality) paint of approved colour and brand complete all as specified and directed.