Construction of Day care cum sub centre building at Nuagaon SC under OMBADC

Earthwork in excavationin of foundation in hard soil including rough dressing and levelling the bed etc complete

Filling foundation and plinth with sand well watered and rammed etc complete

Cement concrete (1:4:8) using 4cm size b.h.g metal etc. Complete as per EIC.

Fly ash Brick work (1:6) in foundation including all labour and material etc complete.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (Base)

grade beam

Column ground fllor

Column 1st floor

Column 2nd floor

Lintel ground fllor

Lintel 1st floor

lintel 2nd floor

Chajja

1st floor

2nd floor

window sill

1st floor

Staircase ground fllor

1st floor

Roof slab

1st floor

2nd floor

Labour for cutting,bending, shifting to site,tying and placing in position HYSD Bar etc. complete.(in Ground Floor)

1st floor

2nd floor

Fly ash Brick work (1:6) in superstructure including all labour and material etc complete.

1st floor

2nd floor

12 mm thick Cement Plaster in CM (1:4) with neat cement punning for Skirting etc complete,

20mm thick plaster (FF)

2nd floor

12mm thick cement plaster in C.M (1:6) including all labour and material etc complete.

1st floor

2nd floor

16mm thick cement plaster in C.M (1:6) including all labour and material etc complete.

1st floor

2nd floor

Vetrified tile fixing on floor on 25mm thick bed of CM(1:4) (GF)

1st floor

Fixing glaged wall tiles in dados,skirting and riser of steps on 12 mm thick cement plaster 1:3 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles,all materials,labour.t&p,all taxes of materials etc complete.

Supplying Fitting and Fixing Chequerrd Tiles in Floors in Cement Mortar (1:4) including all complete as per EIC

1st floor

Providing & laying granite slab over prepared base.

Supplying and fitting and fixing of M.S shutter of approved design including all labour and material etc complete.

1st floor

2nd floor

Dressed seasoned Nonsalwood work framed and fixed in trusses,purlins, door, window, ventilaters and beams (Ground floor)

1st floor

Providing 32mm thick factory made one side laminated flush door shutter with as per IS-2002/92 with splid core BWR Block Board from seasored and treated 2nd class hard wood ,batten binded with phenol formal delite synthetic resigne pressed over suitable adhesive including providing stainless steel hinges,locking arrangement and other fittings and fixed complete in all respect as per direction of Engineer in charge.

1st floor

Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , T&P including cost of glass etc complete as per the direction of Engineer-in charge.

1st floor

Painting two coats over a coat of priming on new wood & iron work etc, complete.

1st floor

2nd floor

Acrlic wall Putty to inside plaster surface including all compllete

1st floor

2nd floor

Plastic emulsion paint two coats to walls with any approved shade on new work to on ever shade including cost of all materials, labour T&P sundries etc. complete.(gf)

1st floor

2nd floor

Wall painting two coats with approved colour of weather seal coat to out side surface of approved shade on new work to give an ever shade including cost of all materials, labour T&P sundries(gf)

1st floor

2nd floor

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed.

Branding for HWC as per specification in outer plaster surface including all complete

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) 1st depth-

2nd depth-

Supplying all materials,labour,T&P and filling in F&p with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C. (a) Ground Floor

First Floor

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour, T&P and providing PCC(1:1.5:3) with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP(1:3)on brick work with punning for skirting including watering,curing,conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC (1:1:5:3) with 12mm size HG chips for RCC works including hoisting, laying, watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/ Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour T&P and providing 50mm thick pre cast RCC baffle walls in cc(1:1.5:3)with 12mm size bhg chips fitted and fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cement flush pointing (1:3)to brick masonry including watering, curing, conveyance of all materialsto worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Filling in F&P with excavated materials,including watering and ramming as per the direction of the E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc(1:1.5 :3)using 12mm size hbg chips,placing the cover on the MH/S.Tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. (a) Ground Floor

First Floor

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floors, treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. (a) Ground Floor

First Floor

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/ kodappa tiles on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of EIC. (a) Ground Floor

First Floor

Supplying all labour materials T&P fitting fixing of AL. door frame with OEL Anodized Al. Door section of 9202 as vertcal member,9201 as top member and 9200 as bottom and middle member and 12 mm thick pre-laminated board in bottom portion fixed on door frame by meams of tapered clip NO-4660 and the frame by means of jointing angle NO-185 including all cost of labour ,T&P ,hire charges of drilling machine ,labour etc all complete as per the dir of EIC.

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC S/J/D

110mm dia.PVC D/J/D

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC offset

110mm dia PVC Y Tee

110mm dia PVC Cowl

75mm dia PVC pipe

75mm dia.PVC Door Bend

75mm dia PVC Plain Bend

75mm dia PVC Tee

75mm dia.PVC Door Tee

75mm dia.PVC Y Tee

75mm dia PVC offset

125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall

Roof cutting

Supplying all materials,labour,T&P for fixings water closet, squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 580mm Orissa Pan(White)

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB

Pedestrial for WHB

Supplying all labour,T&P,materials & fixing Wash Kitcken Sink with C.I/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C. (a) 450mmx400mmx200mm size

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3: 6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6), moulding & shapping the channel inside&benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick cp(1:3) with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1;1.5:3) using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C. Size (760mmx760mmx460mm)

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches(to level or slope) and jointing with supply of approved rubber lubricant by nonheat application method using 40mm bhg metals on bed of the trenchand hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc.and testing all complete as per approved drawing,design,specification and direction of E.I.C. (A)110mm dia PVC pipe with allround encasing

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top, 12mm thick CP(1:4)inside and outside over masonary brickwork gravel packing in the rear of well steining, RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron wirk, watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. (a) 1.20m dia x 2.00m deep Inside Size

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20m dia x 1.80m deep RCC Ring Soak Pit

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 1000 lits capacity on the roof of ground floor

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 25mm dia PVC PVC Pipe (Internal)

32mm dia (ASTM )PVC Pipe

15mm dia PVC inlet Connection Pipe

32mm dia PVC Waste Pipe

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. a)upto 300mm wide

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber). 15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib Cock(S.B)

15mm dia C.P Twin Bib cock

15mm dia C.P Health Fuccet

15mm dia C.P Pillar cock Elbow Action

15mm dia Angle Stop Cock

15mm dia Concealed Stop Cock

15mm dia CP Flange

15mm dia CP Extension Piece

32mm dia PVC Ball valve

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Glass self

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail

CP towel ring

Supplying all materials,labour,T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C. (a) 15mmx100mmlong

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A

Group B

Group C

Recessed wiring to Fan Point in Group B

Recessed wiring to Call Bell Point in Group C

Recessed wiring to Exhaust Fan Point inGroup B

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of Angle holder replacing Ceilling Rose

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type socket, 32A Modular Starter switch & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover

4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of SP MCB 16 way double Door (2.3.8 )

S/F of MCB 12 way Double door (2.3.7)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab)

Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS )

S/F step type modular fan regulator

Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 )

Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )

Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 10w Watt LED Bulb

S/F of 15w Watt LED Bulb

Please Enable Macros to View BoQ information