Construction of Research and Development Laboratory over cookies block in product dairy, Ambattur

Amount

Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary , refilling the sides of foundations with excabvated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications.

Supplying and filling with earth for foundation and basement to required thickness and in lyers on not more than 30cm thick, watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications.

Supplying and filling with Msand for foundation and basement to required thickness and in lyers on not more than 30cm thick, watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications

Plain Cement Concrete 1:5:10 using 40 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications

Dismantling RCC with out affecting existing structure etc., complete as directed by the Federation officers and as per the technical Specifications.

Dismantling Brick work in C.M under 3m height with out affecting existing structure etc., complete as directed by the Federation officers and as per the technical Specifications.

Clean removal of C.M plastering from existing brick wall etc., complete as directed by the Federation officers and as per the technical Specifications.

Dismantling existing damaged Pressed Tiles & Weathering Course etc., complete as directed by the Federation officers and as per the technical Specifications.

Supplying, erecting steel centering using M.S. Sheet of size 90X60cm and BG 10 gauge stiffened welded with M.S. angel of size 25X25X3mm laid over silver osk/country wood joist of size 10X6.5cm spaced at about 90cm centre to centre and supported by casurinaprops of 10 to 13cm dia spaced at 75cm center to centre for all type of RCC roof slab, lintel beam,T,L,beam landing slab plinth beam, grade beam, column footing, column , sunshade, facia, sloped roof, waist slab, etc., Including necessary suppoerts with all cross bracings filling slits and holes in the surfaces(the retrieved materials should be taken back by the contrator) and side shuttering etc., complete as directed by the Federation officers and as per standard specification. - Column surface 5.30m to 6.30m

Column surface 6.30m to 7.30m

Column surface 7.30m to 8.30m

Plain surface 0m to 3.30m

Plain surface 3.30m to 4.30m

Plain surface 4.30m to 5.30m

Plain surface 5.30m to 6.30m

Plain surface 6.30m to 7.30m

Plain surface 7.30m to 8.30m

Reinforced Cement Concrete 1:1.5:3 M25 using 20 mm machine crushed hard granite broken stones excluding cost of centering and reinforcement but including compaction with mechanical vibrators and curing etc., complete as as directed by the federation officers and as per standard specifications. - Above Basement4.50m up to 9.00m height

Supply, fabricating and placing in position of reinforcement grills for all RCC works including cost of steel rods, binding wires, labour for bending, cutting and tying etc., complete as as directed by the federation officers and as per standard specifications.

Plain cement concrete 1:2:4 using 20 mm machine crushed hard granite broken stones excluding cost of centering and reinforcement but including compaction with mechanical vibrators and curing etc., complete as as directed by the federation officers and as per standard specifications. Above basement 4.50m to 9.00 m height

Brick work In cement mortar 1:5 (one part cement and five part sand) using second class ground moulded chamber burnt bricks of side9"X4.5"X3" to line, level and to plumb on one face including necessar scaffolding, racking out jenits, curing etc., complete as directed by the Federation officers and as per standard specification. - Above 4.50m to 9.00m

Plastering with cement mortor 1:5 (one part cemnet and five part sand) 12mm thick including scaffolding, neatly finishing and curing etc., complete as directed by the Federation officers and as per standard specification.

Providing epoxy flooring of 1.80mm to 2mm thick over treated surface with suitable admixtures and the rate inclusive of cost of material and labour (Quality, colour and desigh should got approved from the Engineer in charge of works before commencement of work) etc., complete as per standard specifications and as directed by the federation officers.

Supply & fixing steel rolling shutter (pull and push type with ISI monogram) of approved quality with MS laths 75 mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, springs, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, one coat of red oxide primer etc., complete as directed by the Federation officers and as per standard specification.

Supplying and fixing of powder coated Aluminium doors with partially panelled / Glazed with necessary fixtures hinges,rubber gasket, screws and fixing clips etc., including necessary filling up of gaps at junctions, at top, bottom and sides with sealent etc., Bottom 900mm height shall be with Prelaminated both side Bison lam sheet (Cement Particle Board) fixed to shutter. The door shall be provided with Aluminium handle, door closer, stopper, towerbolt, locking arrangement etc., The cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying and fixing of powder coated Aluminium window with Glazed with necessary fixtures hinges,rubber gasket, screws and fixing clips etc., including necessary filling up of gaps at junctions, at top, bottom and sides with sealent etc., Bottom 900mm height shall be with Prelaminated both side Bison lam sheet (Cement Particle Board) fixed to shutter. The door shall be provided with Aluminium handle, door closer, stopper, towerbolt, locking arrangement etc., The cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying & erecting structural steel of various section like Joist, channel section and purlin in suitable position inclusive of all labour charges for making joints, clit angles, welding, placing in position etc., as directed by the Federation officers and as per standard specifications.

Supply & fixing in position with 60 to 80mm thick Puff insulated powder coated GI roofing sheet of 0.47 mm thick corrugated of approved make for roofing, cantilevered canopies. The rate including the laps with necessary "GI", "J" bolts & nuts, screws, bitumen washers etc., complete as directed by the Federation officers and as per standard specification.

Supply and painting new iron work with 2 coats of anti-corrosive synthetic enamel paint of approved quality and colour over priming coat etc., complete as directed by the Federation officers and as per the standard specifications.

Supply & painting plastered wall surface with two coats of plastic emulsion paint of approved quality and colour including cost of priming coat, making the surface smooth with emery paper ,putty, necessary scaffolding charges etc., complete as directed by the federation officers and as per standard specification.

GST Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.

JPR ENTERPRISES