SPL REPAIR TO OR MD ACCN IN JAGJIT ENCLAVE AT NIWARU MIL STN

Amount

Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid dry or laid dry and pointed complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick masonary or concrete surface & sides of sunken portion, finished even and smooth w/o using extra cement incl mixing of water proofing compund as per manufacturers instructions complete all as specified and directed. Note : WPC shall be measured and paid seperately

Supply only integral water proofing compound complete all as specified.

M & L for priming surfaces and applying normal treatment (for moderate conditiion) using glass fibre base bituman felt, grade 2 complete all as specified and directed.

M & L for applying evently a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed.

M & L for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torched application complete all as specified and directed. Note : The WPT work shall be executed through approved authorised manufacturer only.

M & L for PCC 1:5:10, type E2 (using 40mm graded stone aggregate) as in, foundation filing and mass concrete and filling of sunken portion and other similar work complete all as specified and directed.

M & L for matt finish coloured jointless non skid ceramic tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge

M&L for coloured Glazed ceramic tiles 300x450 x 7-8mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl cutting and polishing (half mirror polish) over and incl over & incl 10 mm screed thick in CM 1:4 complete all as specified and directed .

M&L coloured joint free non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surface such as dado, skirting etc over & including 10 mm thick backing coat on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and refixing in same opening complete all as specified and directed.

M&L for 2nd class hard wood, plain, solid, straight chowkats or frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

M&L for cutting holes exceeding half brick but not exceeding one brick in stone/concrete block masonry built in cement mortar for inserting hold fasts and making good dismantling portion in CM (1:3) or PCC (1:2:4) type B1 as required complete all as specified & directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts; clamps, hold fasts, wall ties; plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M&L for preparing surfaces of small steel articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc area not exceeding 0.10 Sqm each and treated with tar or coal tar black paint complete all as specified & directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19 X 19mm MS square tube of 1.25 mm thickness. The profile shall be mitre cut at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed, suppling & fixing in opening as per specification & drawing given in SSR Part-I complete all as directed and specified.

S&F of Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F Pressed steel frames of size 105 mm x 60 mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

,--ditto-- all as per srl item No 24 above but size of frame 165 x 60mm complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F 18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

S&F second class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area n.exc 3 sqcm complete all as specified and as directed

S&F magnetic ball catcher for cupboard of approved make complete all as specified and as directed

S&F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as secified and directed by Engineer- in -Charge

S&F channel for sliding drawer, of approved make in cupboard all as specified and directed by Engineer -in- Charge

S&F Factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F continuous (piano) hinges, 30mm width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed.

S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed.

S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Dismantling boarding, plywood etc of any description and in any position fixed with screws etc complete all as specified & directed.

S&F for 2nd class hard wood, 20 mm thick boardings, planed both sides and both joints are chamfered and boarding are matched fixed with screws fixed at any situtaion / position/height complete all as specified & directed.

M&L for prearation of new or previously untreated steel and iron surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & as directed.

M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description ot otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 3mm thick (avg thickness) wall care putty on newly plastered wall surafce incl rubbing by sand papper to obtain smooth surface complete all as specified & as directed.

M&L for preparation of new plastered surfaces of walls, pillar, cornices etc and applying two coats of Acrylic washable distemper of approved shade/tint over a coat of primer complete all as specified & as directed.

M&L for complete removal of existing treatment on wall by mechanical means, preparing surfaces and and applying two coats of Acrylic washable distemper of approved shade/tint over a coat of primer complete all as specified & as directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling including brooming down and cleaning the surface and applying two coats of white wash complete all as specified and directed

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 25 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

Fixing only 20 mm dia old steel water tubing and connections in new or old positions fixed to walls, ceiling or in floor etc incl new fittings complete all as specified and directed. Note : (i) Steel tubing obtained from dismantling shall be used under this item (ii) Quoted rate shall be included new fitting

Fixing only 25 mm dia old steel water tubing and connections in new or old positions fixed to walls, ceiling or in floor etc incl new fittings complete all as specified and directed. Note : (i) Steel tubing obtained from dismantling shall be used under this item (ii) Quoted rate shall be included new fitting

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects, flushing pipe complete all as specified & as directed.

S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore two way taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down and refixing 15mm bore angle/stop valve, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm angle/stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Taking down and refixing existing 32 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Taking down and refixing chromium plated tubular towel ring included new chromium plated brass screws & plastic rawl plug complete all as specified and directed.

S&F in repair WHB mixer, 15mm bore, brass, fancy type, chromium plated, single lever, swan neck with crutch or butterfly handle, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Taking down and refixing WHB mixer, 15mm bore, brass, fancy type, chromium plated, single lever, swan neck with crutch or butterfly handle, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm angle/stop valve, fancy type, chromium plated, cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed for iron pipe or for unions complete all as specified and directed.

Taking down and refixing 15 mm angle/stop valve, fancy type, chromium plated, cast copper alloy, with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handle, screwed for iron pipe or for unions complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete all as specified and directed.

Taking down and refixing vitreous china wash basin, white, flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete all as specified and directed.

S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

Taking down and refixing 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Taking down and refing Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

Taking down and refixing corner glass shelf any size incl chromium plated brass screws complete all as specified & directed.

S & F in repair 250 mm corner glass shelf with brass brackets incl chromium plated brass screws complete all as specified & directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

Taking down and refixing brass chromium plated tubular towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12CM wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Taking down and refixing PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors incl taking down complete all as specified & directed.

S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors incl taking down complete all as specified & directed.

S&F in repair 110 mm bore UPVC(SWR) ventilation and rain water pipes (type A conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls incl taking down complete all as specified & directed.

S&F in repair 75mm bore UPVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm dia UPVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair 110 mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and directed.

S&F 110 mm dia UPVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 110mm dia cockroch proof floor trap complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas and the like as in patch work of area n exc 2.5Sqm, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including cleaning of rusted reinforcement, providing fabric mild steel wire mesh 75mm X 75mm of 2mm dia as reinforcement to concrete surfaces, applying adhesive / admixture over steel mesh and providing 25mm thick (avg thickness) guinting mix using 1 part of ordinary portland cement and 2 parts of sand mixed wih adhesive / admixture as per manufacturers instruction and applied with gunting machine at a pressure of 2 to 2.5kgs per sqm incl necessary shuttering, scaffloding and othe T&P reqd for execution of the work complete all as specified and directed.

S&F 32mm bore galvanised iron tubing, medium grade with all necessary fittings as spout to sunken floor complete all as specified and directed.

S&F in repair wire netting of stainless steel wire 1.4mm dia, size of mesh 12mm, fixed with tinned tacks of stainless steel wire staples in steel door incl removing flat iron or fixed in welding complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty/screwed in square n exc 0.5 sqm in each pane complete all as specified and directed

Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated, unseathed, FRLSH multistranded copper conductor cable, single core, 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and 1.6mm thick cadium plate sunken box covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one light point controlled by one, one way switch incl making good the disturbed portion complete all as specified and directed.

,---ditto--- all as per item No. 105 above but for one bell point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 105 above but for one ceiling fan/ exhaust fan point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 105 above but for one 3 pin 5 Amp socket outlet controlled by one switch on independent board with other switches complete all as specified and directed.

,---ditto--- all as per item No. 105 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board with other switches complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated, unseathed, FRLSH multistranded copper conductor cable, single core, 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and 1.6mm thick cadium plate sunken box covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc one 3 pin 16 Amp socket outlet controlled by one switch on independent board incl making good the disturbed portion complete all as specified and directed.

Supply and fix ceiling rose PVC polycarbonate isolated body, 3 terminals 230 Volt complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush button single pole one way 6 Amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 Amp complete complete all as specified and directed.

S&F socket outlet, 2-in-1, 5 pin 6 Amps flush type compete complete all as specified and directed.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps combined flush type compete complete all as specified and directed.

S&F bell push, flush type 5/6 Amp complete all as specified and directed.

S&F door bell AC 240 volts, single pole complete all as specified and directed.

S&F stepped type electronic fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.

Taking down / dismantling of old tube light / ceiling light / wall light fitting and any other LED fitting carefully and deposit to safe custody for reuse complete all as specified and directed.

Fixing only LED tube light fitting 9/10 or 18/20 watt and connecting up incl provn of cable from ceiling rose / connector to tube light fitting complete all as specified and directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type includign taking down Complete all as specified and directed by Engr-in-charge.

S&F in repair LED bulb 10W, 230V edison screw type, energy saver, white warm / crystal white light, 5 star rating complete all as specified and directed by the Engineer-in-Charge

Taking down carefully storage type water heater (geyser) 25 ltr capacity, any make, from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and minor repair and replacement of damaged PVC connection, plug top etc complete all as specified and directed.

Taking down ceiling fan / exhaust fan / wall fan / fresh air fan, sealing cable end, dismantling blades and removing fand and blades and deposit to safe custody complete all as specified and directed.

Hanging only ceiling fan after assembling blades and minor repair and connecting up incl provn of cable from ceiling rose to fan complete all as specified and directed.

Fixing only Exhaust fan after assembling blades and minor repair and connecting up incl provn of cable from ceiling rose to fan complete all as specified and directed.

S&F in repair MCBs of 'C' curve single pole and neutral 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F in repair MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S & F in repair 20amp, single pole and neutral socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 Amps complete all as specified and directed.

Taking down carefully sub main wiring with PVC casing capping / PVC conduit and making good disturbed surfaces complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unseathed, FRLS multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 20mm dia ISI marked ivory colour along with conduit fittings / accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

MOGA CONSTRUCTION (BID ID -3366653)

Rakesh Choudhary Contractor (BID ID -3366329)

J.J.ENGINEERING (BID ID -3365989)