SPECIAL REPAIR TO BLDG NO P 110 AND P158 MES OFFICE AT AFSSR UNDER GE AF GURGAON

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

Demolition of cement concrete (reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.

Demolition of reinforced cement concrete of any description & in any position not specifically provided etc complete all as specified and as directed. (Note : Rate are deemed for G+1 Storey)

M & L for brick work using sub class 'B' old size bricks straight or curved on plan exc 6m meanradius built in CM 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on any type of face of brick work or concrete surfaces including surfaces to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on any type of face of brick work or concrete surfaces including surfaces to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:3 on celling complete all as specified and as directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat after applying a coat of anticorrosion chemical coating upon exposed reinforcement and also fix chicken wiremesh where reqd necessary or directed at RCC Chaaja, Parapet, facia, roof projection etc upto G+1 storey of building complete all as specified and as directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for Washed marble stone grit plaster (With white cement and pigment) on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 white cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 marble stone chipping 10mm nominal size, in colour code) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. (Rates of providing grooves as per pattern decided by GE shall be included in quoted rates of this item).

M&L for preparing plastered surface applying two coat of oil bound distemper on wall white or any tint over a coat of primer etc) complete as specified and as directed.

M&L for preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces as of walls and applying two Coats of acrylic Weather Coat Exterior Paint over a one coat of acrylic co-polymer exterior primer achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparation of new rough cast plastered surfaces as of walls and applying two Coats of acrylic Weather Coat Exterior Paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 20 mm agg. ) as in plinth protection / path/ any paved area complete all as spd and as directed.

M & L for Non Skid ceramic printed coloured jointless tiles 300 x 300 x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.

M&L for Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed.

M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and as directed.

M&L for marble 18-20 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade of the floor slab / staircase / steps,riser incl rubbing and polishing incl rounding to edge of marble if any complete all as specified and as directed.

M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushion complete all as spd and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade except tiles over 25mm thick sand cushion complete all as spd and as directed.

M&L for complete removal of existing treatment of wall, celling, chajja, projection, plastered surfaces by grinder, scruber , Washing, rubbing down and stopping of distempered, cement based paint , white wash, putty and painted surfaces complete all as specified and as directed. (Note : Complete removal to be done with meachinal angle grinder using sand paper/scrubber )

M&L for preparing old / new plastered surface and applying 2mm thick Birla/Asian wall care Putty to external / interal surface complete as specified and as directed.

M&L for preparing new plastered surface/ old surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and as directed.

M&L for preparation of old surfaces of walls applying two coat of oil bound distemper on walls over a coat of distemper primer complete all as specified and as directed.

M&L for preparation of old plastered surfaces as of walls and applying two Coats of acrylic Weather Coat Exterior Paint over a one coat of acrylic co-polymer exterior primer achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of concerete surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC framecomplete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc as in railing, gates, shed in any shape as curved, round , straight as reqd, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as spd and as directed.

M&L for Design, Supply, Fabrication and installation of Glass Railings Systems (H - 1200mm) as per approved drawings complete using SS 304 Top handrail 65mm dia, anchor bracket Alum/SS. U Channel / mechanism including Cover Profile & Silicon Grip as mentioned below with all necessary hardwares along with 10 mm thk toughened Glass as per specifications etc including providing all fixing arrangement and fixing of all accessories as per manufactures standard, and instruction as per instruction of engineer incharge complete all as spd and as directed.

S&F 12mm thick WPC Louvers incl WPC corner profile 25mm wide and 2mm thick fixed with SS fastner 0.5mm thick clip in any colour and design at Wall and Celling as specifed and directed. Necessary opening / groove to be provided for profile lighting complete all as specified and as directed.. (Note : Colour & Pattern as approved by GE). Make : ALSTONE, LEBEN or equvialent out of makes spd in list of makes.

S&F LED Profile lights for WPC louvers for wall / celling with following specifications and as directed :- (a) Aluminium Profile Case : 15/17mm wide and 6/8mm deep (Heavy Duty Quality) rectangular / angular shape incl all fixing clips and screws. (b) LED Strips : 120 LED Bulb / Mtr (Note : Necessary Adaptor as reqd with respect to Load of LED Bulb to be included in quoted rate of the above items).

Supply,fabrication and fixing of stainless steel 304 grade letters incl vowels smooth finish as per sample provided ( Hindi/English) on granite wall/steel sheet made out of 1mm thick stainless steel sheet (minimum size not lesss than 40mm thick, 40mm in width and 300mm high) and 10mm dia, 75mm long MS studs weld with back side of letters as per site requirement fix on granite wall/ steel sheet making holes by drilling machine and studs fix with epoxy adhesssive/nut bolts complete all as specified and as directed.

S&F stainless steel 304 logo of size 500x500x40mm made out of 1mm thick SS sheet as per sample provided and directed by Engr-in-Charge fixed on MS sheet/Granite by making holes drilling machine and studs fix with epoxy adhessive/nut bolt complete all as specified and as directed.

M&L for use and waste of form work to soffits suspended slab, cloumn, beam & roof beam for finishing even and rough surfaces complete all as specified and as directed.

S&F TMT bars 10mm dia and over out to length bent to shape required (ranking,bending spirally and binded with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F TMT bars 8mm dia cut out to length bent to shape required (ranking,bending spirally and binded with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for RCC 1:1 ½ : 3 type A-1, (using 20mm graded crushed stone aggregate ) as in slab, roof beams, column Foundations, including rafts, footings, foundation, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete upto ground level complete all as spd and as directed.

M & L for hard core using broken bricks of gauge n.exc 63mm deposited,spreading and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as spd and as directed.

S&F for vitreous China, wash hand basin, counter top, white, of size 530mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as spd and as directed. Make: Jaquar Cat Part No. ECS-WHT-601 or equivalent out of makes specified in list of makes.

S&F wash hand basin table top of size 460x460x170 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc in repair. complete all as specified and as directed. Make Jaquar cat part No - JDS-WHT-25935 or equivalent out of makes specified in list of makes.

S & F vitreous china squalting pan 'Orissa' pattern size 580x440mm white with inttegral foot rest and cast iron 'P' or 'S' trap including provision cement concrete 1:7:12 type F-2 and jointing to flush pipe complete all as specified and as directed.

S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F CP Pillar cock with swan neck spout and aerator for 15mm dia bore pipe (Make Cera F2010104 or Equivalent) complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed.

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F 600mm long towel rail of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleat (min wt 190gm) complete all as specified and as directed.

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 1000 Ltr capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed.

Taking down steel tubing & connections 15mm / 20mm dia (walls, ceiling, floor) etc complete all as specified and as directed.

S&F tubes 15mm dia medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors bore pipe (including in short length) concealled/surfaced complete all as specified and as directed.

S&F tubes 20mm dia medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors bore pipe (including in short length) complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 110 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed.

S & F in repair 75 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

S &F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

Excavation in trenches in soft/loose soil n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete and getting out all as specified and as directed.

M & L for cement concrete 1:4:8 type D2 bed to drain pipes including haunching against the sides of pipes after they laid and tested in 150mm bore pipe complete all as specified and as directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed.

M & L for cement concrete !:2:4 type B-1 (using 20mm graded crushed stone aggregate as in surface channel, drain and bending of manholes finishes the surfaces even & smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and as directed.

M & L for reinforced cement concerete 1:2:4 type B-1 (using 20mm graded) as in precast cover slabs of manholes and similar articles and sctting in CM 1:6 including necessary form work etc. complete all as specified and as directed.

S&F mild steel work as in frame and chowkats fastering, welded and fixing including mild steel hold fasts& braces etc confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F factory made 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash, bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 35mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels and laminated type on both sides complete all as specified and as directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ S&F wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S&F stainless steel handles 300mm long for fixing in toughend glass complete all as specified and as directed.

S&F stainless steel Lock for toughend glass complete all as specified and as directed.

S&F double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet /stainless steel 304 grade foundation box, main body with stainless steel cover governing pivot made of brass and incl other parts as TOP Pivot, Top Patch and Bottom Patch made of heavy duty of load bearing capacity 80kg complete all as specified and as directed.

S&F double action TOP Pivot, Top Patch and Bottom Patch as in supporting of floor door closer to fix toughned glass of heavy duty of load bearing capacity 80kg made of Stainless steel complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed.

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed

S&F 3ways sliding powder coated / anodized aluminium glazed window frame of size 88mm x 32mm x 2mm thick complete all as specified and as directed.

Supply and fix 3ways sliding powder coated / anodized aluminium glazed window shutter with the following specification :- (a) Window Shutter with 18mm x40mm x 1.5mm section in stiles, rails (b) Supply and fix of rubber beading and with 4.8mm thick coloured glass pane one side mirror finished , area with aluminium handles and necessary locking arrangement. (c) S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.Note : Rates are included for glass, stainless steel wire cloth and all other necessary accessoires etc.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old existing usnv sheets complete all as specified and as directed.

S&F for pre-painted half circular factory made for chajja galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajja, roof projection etc at height upto G+3, fixed with self tapping screws as specified and incl dismantling of existing damaged RCC chaaja / roof projection and making good surface matching to existing before fixing of sheet incl dismantling of old existing usnv sheets complete all as specified and as directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh incl dismantling of old existing usnv ceiling,complete all as spd and as directed. Note : Rates are included for all metal frames and wiremesh and design and shape (flat / curved) of ceiling as approved by accepting officer)

S & F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S & F 250mm long 14-16mm dia Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 150mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm long aluminum handles ‘D’ type anodized complete all as specified and as directed.

S&F 300 mm mild steel,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and with oil putty in square n exc 0.5 sqmin each pane complete all as specified and as directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed.

M & L for PCC 1:2:4 type C-2 (using 20 mm agg. ) as on roof flooring using WPC complete all as spd and directed.

M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

M&L for two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed.

M&L for Black Granite (or any other colour as approved by accepting officer) 18-20mm thick black colour (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform, floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and as directed.

Dismantling of old / unsv wall lining / clading complete all as specified and as directed.

M&L for Designing providing and fixing 3mm thick Aluminium Composite Panel Cladding over RCC/Brick surfaces either segmental/straight in plan wherever specified with extruded aluminium U sections, angle, cleats, weather silicon sealants, backer rods of required size stainless steel screws, rivets, brackets, drilling and fixing the cladding to either masonry or reinforced cement concrete including repairing of wall with plaster CM 1:4 where required to fix aluminium setion as the case may be manufacturer's specifications, complete the work in all respect including all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable. On horizontal surface, the size of sheet should be maximum available of size complete all as per manufacturer's specifications and as directed. (Note : Rate are deemed for G+1 Storey)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

Takig down unserviceable sub main wiring of any type/size including wire.conduite/battens etc complete all as specified and as directed.

Takig down unserviceable MCB DB's box of any size/rating complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size( Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS 694 for phase and neutrel drawn in and includin less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth doily drawn in same concealed conduit complete all as specified for the following;-

(a) One light point /bell point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed.

(b) One fan point/Exhaust fan controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed.

(c) One 5 pin socket outlet 5/6 Amps on same board including singal core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily complete all as specified and as directed.

(d) One 5 pin socket outlet,5Amps,independent,with cable 1.5 Sqmm size complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 4 Sqmm size( Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS 694uit confim drawn in and including medium grade concealed PVC conduit confiming to ISI marked not less than 25 mm dia with concealde sunk-in pressed steel terminal boxes of required size less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 4 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth doily drawn in same concealed conduit complete all as specified for one 6 pin socket outlet two in one 16/6 Amps on an independent board.

All as per item No 126 hereinbefore but with cable 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm stranded copper unsheathed complete all as specified and as directed.

Supply and fix in repairs switch piano type one way 6 Amps flush type ,240 volt AC complete all as specified and as directed.

Supply and fix in repairs socket outlet 2 in 1,3 pin 5 Amps complete all as specified and as directed.

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and as directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint complete all as specified and as directed.

Supply and Fix in repair stepped type electronic fan regulator 120 watt ,240 olt flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply & Fix Singal pole neutral enclosure with a two pin and earth plug and socket complete with singal pole MCB 20 Amps and ncluding taking down all as specified and as directed.

Supply & Fix exhaust fan, steel body AC singal phase 230 V of size 300mm sweep with,blade,and frame and louvers and including taking down complet all as specified and as directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt (2ft long) colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complet all as specified and as directed.

Supply & Fix wall mounted extruded aluminium housing high quality indoor batten LED tube 10 watt (4ft long) colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complet all as specified and as directed.

Supply & Fix Recess mounting LED flat panel light fitting 36 watt, 2 x 2 , 600mm x 600 mm size with efficient LEDs lumen 2000 -3000, PF> 0.9, THD less 15% including taking down unserviceable fitting of any type and including taking down complet all as specified and as directed.

Supply & Fix Bldg security light Supply and fixing in replacement of LED building light luminaire 35 watt,pressure dia cast aluminium housing with heat resistant toughened glass & IP 66 protection and including taking down complet all as specified and as directed.

Supply & Fix lamp holder,PVC/Polycarbonale type with black plate suitable for batten fitting including taking down complet all as specified and as directed.

Supply and fix in repairs Bell push, flush type, 6 Amp flush type ,240volt AC and including taking down complet all as specified and as directed.

Supply and fix in repair electric bell Ding Dong, AC 230 volts and including taking down all as specified and as directed

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complet all as specified and as directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted 4 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complet all as specified and as directed.

S & F sheet metal enclosures for double door Vartical type distribution board factory made duly painted 4 way TPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complet all as specified and as directed.

S & F MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type and including taking down complet all as specified and as directed.

S & F MCCB 100 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type and including taking down complet all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and as directed..

Supply and fixing miniature circuit breaker (MCB) of SPN and current carrying capacity 40 AMP240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and as directed.

S & F steet light bracket made out of 40 mm dia light grade GI pipe 1.5 Mtr long bend to shape including necessary fixing arrangement with clamp of suitable size made out of 35x 4 mm MS flat suitable shape to pole including nut bolt 03 nos and washer complete all as specified and as directed

S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20 mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one runs of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB and ncluding taking down all as specified and as directed. Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. 2. Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one runs of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. 2. Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

PAWAN KUMAR

k k enterprises

M/S Rohit Enterprises

Chaudhary Constructions

P R Constructions