Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹32.7 L+₹2.9 L (9.61%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹38.1 L+₹8.3 L (27.8%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹39.4 L+₹9.6 L (32.1%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹40.3 L+₹10.5 L (35.2%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/REPLACEMENT OF JOINERY WORK IN THE MD OFFR ACCN AND FAFA ACCN AT URBAN VILLAGE AND CASSEL ROAD IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2022_MES_538605_1
GE/DE-23/2022-23
Open Tender
Coal Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹89,000
Yes
4 Nov 2022
16 Jul 2022
8 Sept 2022
16 Jul 2022
5 Sept 2022
22 Aug 2022
Amount
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.
All as per Srl item No 1 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr complete all as specified and as directed by Engr-in-Charge.
Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and as directed by Engr-in-Charge.
S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified and as directed by Engr-in-Charge.
S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work conform-ing to Fe 290 (Gde E-165) complete all as specified and as directed by Engr-in-Charge.
M&L Providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, hold fast, chamfered, water through and the like including weathering slightly rounded or chamfered and throating complete all as specified and as directed by Engr-in-Charge.
S&F 35mm thick 2nd class hard wood glazed and sekeleton shutter's open rebated prepare to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass gauge etc size of member of shutters as per SSR Part-I sec-8 clause 8.24(a) complete all as specified and as directed by Engr-in-Charge.
S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides complete all as specified and as directed by Engr-in-Charge.
S&F galvanised mild steel wire clothe 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed by Engr-in-Charge.
S &F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed by Engr-in-Charge.
S&F 100mm long butt Hinges, medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge.
S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed complete all as specified and as directed by Engr-in-Charge.
S&F in repair 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Aluminium handles, 150mm size cast type anodised complete all as specified and as directed by Engr-in-Charge.
S&F in repairs for mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge.
S&F Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm overall length of cover plate complete all as specified and as directed by Engr-in-Charge.
S&F in repair Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm overall length of cover plate complete all as specified and as directed by Engr-in-Charge.
S&F powder coated aluminium frame for ventilators, doors with one or more rebated incl jointing cleats for fixing etc complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type without AC opening incl 3mm thick glass and stainless steel wiremesh (02 shutters with glass and 01 with wiremesh), without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including frame/fittings complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type with AC opening(with shutter) incl 3mm thick glass and stainless steel wiremesh (02 shutters with glass and 01 with wiremesh and balance portion with fix glass), without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including frame/fittings complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2No.) ,aluminium tower bolt 100 mm long (2No.),suitable handle (1 No.) complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
S&F Sheet glass, 5.5 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and as directed by Engr-in-Charge.
S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.
S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and as directed by Engr-in-Charge.
Dismantling boarding, any description, fixed in any position with screw complete all as specified and as directed by Engr-in-Charge.
Providing & Fixing of factory made kitchen cupboards (lower and upper unit) made up 18 mm thick HDHMR Board (Century/Action Tesli/ Kitply) with both side comany pasted (any colour) mild and 10mm HDHMR board with white colur on both sides. Front shutter/partitions shall be made of machine cut18mm MDF board with laminates (merino/century/kitply) duly lipping (edge bending) complete all the factory with G Profile handle of approved colour and soft closing hinges (Hettich/ Godrej/ IPSA). (Note: No edge bending will be allowed at site and measurement shall be of front face only).
Providing & Fixing 18mm thick MDF board with approved lamination all machine cut & pasted, lipped (edge bending) factory made used as shutter along with all soft close hardware (Hettich) required and frame to cover area under WHB/ Sinks as directed on ground.
S&F 50mm size cup board locks of brass including keys set, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm stainless steel complete all as specified and as directed by Engr-in-Charge.
Stainless Steel (SS-304) perforated Cutlary basket (6161/6160) product code made of min 4mm dia stainless steel wire and bottom of S S perforated sheet (sheet grade 304) approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godreg Cat Part No 6132 or IPSA/ Hettich as approved by Engr-in-Charge.
Stainless Steel thali basket of size (6163/6164) made of min 4mm dia stainless steel wire (sheet grade 304) approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godreg Cat Part No 6136 or IPSA/ Hettich as approved by Engr-in-Charge.
Stainless Steel basket (plain) of product code (6120/6121) made of min 4mm dia stainless steel wire (sheet grade 304) approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godreg Cat Part No 6121 or IPSA/ Hettich as approved by Engr-in-Charge.
S&F in repair aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom of door complete all as specified and as directed by Engr-in-Charge.
M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of surfaces complete all as specified and as directed by Engr-in-Charge.
M&L two coats of synthetic enamel painting on new wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
Hacking out old brocken glass (any thickness , size , quality or description) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane complete all as specified and as directed by Engr-in-Charge.
All as per serial item No 41 above but figured glass pin head type complete all as specified and as directed by Engr-in-Charge.
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sq.m. in each pane complete all as specified and as directed by Engr-in-Charge.
Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for prepration of newly plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over one coat of primer from the same manufacturer complete all as specified and as directed by Engr- in-charge.
M&L for applying two coats of acrylic emulsion over one coat of primer and one coat of 1mm thick oil putty on newly plastered surfaces of wall incl preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Drapery rod 25mm dia stainless steel pipe with steel finish 1 mm thick incl steel end bulbs, steel brackets etc incl connected items complete all as specified and as directed by Engr-in-Charge.
S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed by Engr-in-Charge.
M&L in replacement tiles any type/size and thickness in patches, area n exc 5 sq.m. including taking out old screed/rendering and proving new base in lieu , and laying or setting, jointing and pointing in while or coloured cement so as to match the existing tile work complete all as specified and as directed by Engr-in-Charge.
M&L for filling glass putty to old/existing window glass panes n exc 0.5 sqm each incl removal of old loose glass putty complete all as specified and as directed by Engr-in-Charge. (Note : The work will be executed at High rise bldgs and necessary provision for T&P, scaffoling and safety measures etc is deemed to be included in unit rate quoted by the tenderer for the same.)
M&L Taking down existing celing any type and any description for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw incl frame work of aluminium snap grid and GI Hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge.
Taking down existing old rolling shutters area exc. 4 Sqm but not exc. 9.00 Sqm each in any position and description and removing from site of work complete all as specified and as directed by Engr-in-Charge.
S&F Steel rolling shutters ,with 1.25mm thick laths without ball bearing , as specified including top cover , anchoring rod,springs, hasp and staple erected in position as indicated ; push pull or manual type including making good to dismantelled portions complete all as specified and as directed by Engr-in-Charge.
M&L for repair to existing steel rolling shutters area exc. 4.00 Sqm but not exc. 9.00Sqm each by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs complete all as specified and as directed by Engr-in-Charge.
S&F in repair 1.25mm thick plain black steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and as directed by Engr-in-Charge.
sunil traders
Vipul Construction
POONAM ENTERPRISES
imran construction company
S GOURAV PRAKASH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .