NIT for Development of Two Rooms for Anesthesia Department at AIIMS Nagpur

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing 12 mm cement plaster of mix : (1:6) (1 cement: 6 sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size - Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. - Size of Tile 600x600 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as perdirections of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Supply, Installation, Testing, and Commissioning of floor-mounted AHU. . Capacity: 12 TR, Air Flow: 4800 CFM, Cooling Technology chilled water coil, and hot water coil for (dehumidification ) Accessories Butterfly valve, PIBC valve with actuator on thermostat based, Y-strainer, manual thermometer and manual gauge.

Existing 4800 CFM AHU to remove and reinstall with all its accessories to another area within the same building from 3rd to 2 nd floor.

Supply Installation testing commissioning of Mild steel class C pipe of required size as per site feasiblity, for 4800 CFM AHU with hot water coil including Nitrile Rubber Insulation of 25mm with required aluminum cladding FOR for chilled water coil and L type, 45 mm angle supports

Supply Installation Testing Commissioning of GI Duct 0.8 MM. Material: Galvanized Iron (GI), Thickness: 0.8mm, Duct Type: Rectangular/Spiral, Finish: Powder-coated to prevent corrosion

Supply Installation of Nitrile Rubber Insulation of 19mm. Material: Nitrile Rubber, Thickness: 19mm, Thermal Conductivity: 0.036 W/mK, Density: 180-220 kg/m³, Temperature Resistance: -30°C to +110°C, Fire Rating: Class O

Diffuser Supply with Key Damper. Type: Ceiling-mounted, Air Flow Control: Key damper, Material: Aluminium or Mild Steel, Finish: Powder-coated, Size: 600 x 600 mm, Airflow: 300-500 CFM per unit

Drain Pipe UPVC 40 MM. Material: UPVC (Unplasticized Polyvinyl Chloride), Diameter: 40mm, Pressure Rating: 4-6 bar, Length: 3 meters per piece, Installation: Horizontal/Vertical configuration

Supply Installation Testing Commissioning of MS Louvers. Material: Mild Steel (MS), Size: 600mm x 600mm (customizable), Finish: Powder-coated or Galvanized, Blade Type: Horizontal, Protection: Anti-corrosion coating

Supply and Installation of Electrical Power Cable (For Indoor and Outdoor Units). Type: Armoured/Unarmoured, Voltage Rating: 3 Core, 415V, Conductor: Copper, Size: 2.5mm² to 10mm² depending on unit load, Insulation: PVC or XLPE

Supply and Installation of Communication Cable (For Data and Control Wiring). Type: Shielded Twisted Pair (STP), Cable Gauge: 22 AWG, Length: As per requirement, Data Rate: Up to 10 Gbps, Voltage Rating: 24V, Shielding: Foil or Braided

Supply and Installation of Cable Tray (For Routing Electrical and Communication Cables) Material: Galvanized Steel or Aluminium, Width: 300mm to 600mm, Height: 50mm to 150mm, Load Capacity: 60-150 kg/m depending on size, Type: Ladder or Perforated Tray

Supply and Installation of Electrical Distribution Panel. Type: Metal Enclosed, Voltage Rating: 415V, Bus Bar Rating: 100A to 1000A, Incoming and Outgoing Circuits: 12-24, Protection: MCBs, MCCBs, Mounting: Floor-mounted

Supply and Installation of Circuit Breakers, Fuses, and Accessories (For Protection of Electrical Circuit). Type: MCB (Miniature Circuit Breaker), Rating: 10A to 100A, Type of Protection: Overload, Short-circuit, Fuse Type: HRC (High Rupturing Capacity), Accessories: Terminals, Glands

Miscellaneous Items (Connectors, Junction Boxes, Glands, Outdoor MS Stand, Scaffolding, Lifting shifting etc.)

Supply, Installation, Testing & Commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with accessories like rosset plate and SS flexible pipe fittings complete as required. (Make-NewAge,HD )

Supply, Installation, Testing & Commissioning of 6 Watt Speaker for PA system including integration with existing PA System. (Make-Honeywell,Bosch)

Supply, Installation, Testing & Commissioning of Smoke detector or Multi sensor detector with mounting base, LED, complete as per all requirements of technical specifications including integration with existing Fire Alarm System. (Make-Notifier system sensor)

Supply and laying of 2 core 1.5 sqmm Flexible Copper FRLS Cable with all accessories for Fire Alarm and PA system as required.(Make-Polycab)

SITC of 36W Recessed 2 x 2 Square Down Light

Supply and fixing of 16A Switch & 6/16A Socket Complete set - 6 module

Supply and fixing of 16A Switch & 6/16A Socket Complete set - 3 module

Supply and fixing of 6A 1W Switch Complete set - 4 module

Supply and fixing of 6A 1W Switch Complete set - 2 module

Supply, installation, testing & commissioning of 4 sq mm copper wiring through MS conduit (with color coding of Phase, neutral and Earth)

Supply, installation, testing & commissioning of 2.5 sq mm copper wiring through MS conduit (with color coding of Phase, neutral and Earth)

Supplying and laying of 25 MM size of MS conduit along with accessories

SITC of 10 Sq MM 4 Core Copper Armoured Cable along with accessories

SITC of 6 Sq MM 4 Core Copper Armoured Cable along with accessories

SITC of 4 Sq MM 4 Core Copper Armoured Cable along with accessories

SITC of 200 MM MS cable tray along with accessories

Electrical PDB with all accessories PDB - 63A, 4 Pole Isolator (1 Nos), 40A 2 Pole RCCB (3 Nos), 16A MCB (21 Nos)

Electrical UPSDB with all accessories UPSDB - 63A, 4 Pole Isolator (1 Nos), 40A 2 Pole RCCB (3 Nos), 16A MCB (21 Nos)

Electrical LDB with all accessories LDB - 40A, 4 Pole Isolator (1 Nos), 25A 2 Pole RCCB (3 Nos), 10A MCB (18 Nos)

Electrical ELDB with all accessories ELDB - 25A, 2 Pole Isolator (1 Nos), 25A 2 Pole RCCB (1 Nos), 10A MCB (10 Nos)

Supply and fixing of Celling mounted Projector Stand ( As per instruction of site engineer )