Provision of addition/alteration and allied works in building No P/77 at ICGS Mandapam under GE (I) (CG) Chennai

Amount

Demolition of brick work or stone / boulder masonary, built in cement mortar including removal of debris off the premises not exceeding 100 m complete all as specified and as directed.

Material and labour for half brick work with flyash bricks bricks straight or curved on plan to radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down wooden chowkats or frame with shutters not exceeding 1.50sqm each(without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Demolition cement concrete (un reinforced) of any description in ground floor n. exc 15 cm thickness (below or above ground level) including removal of debris off the premises not exceeding 100 m complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (stiles) with wood free EPS with 4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face including fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube with wood grain printed PVC sheet and edges will be painted to match with printed sheet as per specification & drawing complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors,window and ventilators with shutter side hung type without sash bars including necessary joining cleats,glazing clips ,aluminium anodised snap beading screws with anodised aluminium fittings such as peg stays 100 mm long suitable handle and locking system etc and glazing cleats .neoprene rubber beading fixed in frames and making good the disturbed surface in CM (1:3) complete all as specified and as directed. Make : Jindal/Hindalco/Indal Note :-(i) Thickness of powder coating shall not be less than 50 microns.(ii)Make of aluminium frame/Track : Jindal/Hindalco/Indal

Supply and fix Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to aluminium frames complete al as specified and as directed .Make:Tiger brand/India wire mesh

Supply and fix 75 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.Make:CROWN/JINDAL/ESS&ESS

Supply and fix 75 mm long aluminium handles cast type anodised complete all as specified and as directed. Make:CROWN/JINDAL/ESS&ESS

Supply and fix stainless steel Butt hinges 100mm size fixed to PVC frames with suitable screws complete all as specified as directed.

Supply and fix MS flat iron small articles such as clamp including bolts if required etc conforming to Fe 290 Gde -E-165 complete all as specified and as directed.

Material and labour for Removal of existing treatment and repairs to sunken portion of toilet of floor area not exceeding 5 sqm and side of wall up to a height of 100 mm from floor level and applying a polymermodified bonding agent and plastering with 15 mm thick CM 1:4 mixed with water proofing compound as per manufacturers instructions and applying one coat of bituminuous primer confirming to IS-3384 @0.3 litres/sqmand laying Acrylic Polypropylene modified membrane (APP) reinforced with non woven polyester of weight 3.50 kg/sqm (minimum thickness 3mm )with minimum 75 mm side overlaps and 100 mm end overlaps,sealing the all pipe connections with polymer/elastometric chemicals and filling with water and tested for 48 hrs and filling with PCC Lean concrete1:5:10 using 40 mm graded aggregate including making slope towards spouts in the bottom surface,providing 02 nos spouts of 50 mm dia PVC pipedown and connected to manhole complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises not exceeding 100 metres complete all as specified and as directed

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying tilescomplete all as specified and as directed. Note: Make of ceramic tile:Johnson/Khajaria/Somany

Supply and fix in repairs PVC (SWR) pipes of dia 110 mm single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.Make: Finolex/Tru bore/Supreme

Supply and fix in repairs 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.Make: Finolex/Tru bore/Supreme

Supply and fix PVC SWR junction single (Single T) equal 110 mm dia provided with access door complete all as specified and as directed.Make: Finolex/Tru bore/Supreme

Supply and fix in repairs 75mm dia PVC SWR floor trap, with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base complete all as specified

Supply only integral water proofing compound ISI Marked . Make: Impermo/Roff.

Taking down cement mortar plaster of any description on wall in patches of area not exceeding 5 sqm including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 10mm rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15mm rendering in two layer, 10mm thick in cement mortar (1:6) as dubbing coat and 5mm thick in cement mortar (1:4) using water proofing compound @ 2% by weight of cement as finishing coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete. Note :- Water proofing compound shall be measured and paid separately

Material and labour for 5 mm rendering in cement mortar (1:3) on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant priming paint etc complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Supply and fix in repairs vitreous chinna wash hand basin ,white flat back of size 550x400 mm including cutting for and pinning in end of brackets including brackets and 32 mm dia chromium plated waste fittings with32mm PVC waste pipe , 900mm long complete all as specified and as directed.

Supply and fix in repairs Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make:GEM/JAGUAR/PARKO

Supply and fix in repairs PVC lowlevel flushing cistern 10 litres capacity with complete accessories fixed with in let/out let ball valve , float and necessary mild steel brackets and fixing of chain and pully or lever and connecting with flush pipe to pedestal pan complete all as specified and as directed. Make:Parryware(Slim line)/Cera/Neycer

Supply and fix in repairs fancy type Chromium plated Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule , concealed complete all as specified and as directed.Make:GEM/JAGUAR/PARKO

Supply and fix in repairs fancy type Chromium plated stop valve 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for unions, concealed complete all as specified and as directed.Make:GEM/JAGUAR/PARKO

Supply and fix in repairs Brass CP mixer for mixing hot and cold water screwed down for iron pipe of 15 mm bore dia of pipe complete all as specified and as directed.Make:GEM/JAGUAR/PARKO

Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.Make:Prayag

Supply and fix in repairs vitreous china wash down water closet pan ,Pedestal pan white colour and trap including connection to trap or outgoing pipe and to flushing pipe ,antisyphonage pipe etc including plastic water closet seat,white,closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including making good the existing floor surface complete all as specified and as directed.

Taking up or down GI water tubing and connections including cleaning for re-fixing or removing from site and taken as credit of size 15 mm dia bore of pipe complete all as specified and as directed.

Taking up or down GI water tubing and connections including cleaning for re-fixing or removing from site and taken as credit of size 20 mm dia bore of pipe complete all as specified and as directed.

Supply and fix in repairs 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.Make:CROWN/JINDAL/ESS&ESS

Supply and fix in repairs150 mm size aluminum handles, cast type anodised complete all as specified and as directed.Make:CROWN/JINDAL/ESS&ESS

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying tiles complete all as specified and as directed. Note: Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Joint free glazed ceramic coloured tiles of size 300 x 450mm x 7mm thick /350 mmx250 mmx 7 mm thick on vertical surfaces such as skirtings, dados and riser to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.Note: Make of glazed ceramic tile:Johnson/Khajaria/Somany

Supply and fix soap dish,vitreous china white of size 160 mmx160 mmx90 mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fix chromium plated shower rose with swivel joints, 125 mm size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix toilet paper holder of vitreous china fixed to wall with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs cast iron floor/Nahani trap of 75 mm outlet with grating including jionting to waste pipe in cement joint complete all as specified and as directed.

Supply and fix in repairs brass chromium plated tabular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed. Make:CROWN/JINDAL/ESS&ESS

Supply and fix in repairs CP towel ring Make: Jaguar/Cera

Supply and fix in repairs Hand shower health faucet Abs body with wall hook and 1.50 metre long easy flex tube in chrome finish hose pipe for EWC including hinges with fitting complete all as specified and as directed.Make : Jaquar/Marc.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16& PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed to walls,ceilings or in floors etc (ISI Marked) complete all as specified and as directed. Make:SFMC/VECTUS

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16& PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings lfixed to walls,ceilings or in floors etc (ISI Marked) complete all as specified and as directed. Make:SFMC/VECTUS

Material and labour for 20mm thick Granite tiles( machine cut, table rubbed and polished) in steps,jamps,pillars,window cills , cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement using marble dust ith admixture of pigment to match the shade of granite stone including grinding and polishing complete,over and including 15mm thick rendering in cement mortar 1:4 and pointing in white cement 1:2 complete all as specified and as directed.

Material and labour for preparation of ol plastered surfaces of walls and applying two coats of oil bound distember complete all as specified and as directed.

Material and labour for preparation of plastered surfaces of walls including 3mm thick Wall Care Putty on wall surfaces and cleaning the wall surface with the help of sand paper,putty blade or wire brush to obtain glossy surface complete all as specified and as directed. Note : (i) Make of wall care putty :JK White cement/Birla white cement

Material and labour for Providing cement concrete 1:2:4 using 12.5 mm graded aggregate as in roof kerbs, rounded or chamfered edges including necessary form work complete all as specified and as directed.

Supply and fix aluminium wardrobe hooks (single)50 to 60 mm complete all as specified and as directed.

Supply and fix Exhaust Fan 300 mm sweep,Heavy Duty ,metallic body ,1300 to1400 RPM complete with Louvers including making suitable opening at a required height and provision of nuts,bolts and washer for fixing of exhaust fan and making good the surface to match with the existing surface complete all as specified and as directed.Make:Almonard/Khaitan

Material and labour for Cutting holes in brick wall built in cement mortar and making good in cement mortar (1:3) including painting as per exixting surface for fixing exhaust fan complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 2mm thick terminal boxes MS sheet flush mounted with 3mm thick laminated hylem sheet for mountling switches, socket, fan regulators etc complete for one exhaust Fan point controlled by one switch complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian/RR Kable Make of PVC conduit : Avon plast/ Kon seal / Garware.

All as per item No.61 here in before but 4 Sqmm single core PVC cable for phase,geyser metal socket outlet on independent board.

Supply and fix switch piano flush type single pole one way 5 A 240 Volts complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix ceiling rose , 3 phase , PVC/Polycarbonate ,isolated body , 2/ 3 terminals 6A 230Volts complete all as specified and as directed. Make : Anchor/Legrand/SSK

Supply and fix in repairs Metal clad socket single pole and netural enclosure with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 230 Volts complete all as specified and as directed. Make : Indo Asian/L&T/Siemen

Material and labour for Cutting chases in brick wall, girth not exceeding 10cm for concealed conduit wiring and making good in cement mortar (1:3) to match with the existing surface including finishescomplete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings such as switches, sockets, ceiling roses, pendants,regulators etc complete including removing material from wall/ceiling etc and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of 20 mm dia along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 2mm thick terminal boxes MS sheet flush mounted with 3mm thick laminated hylem sheet for mountling switches, socket, fan regulators etc complete for one light point controlled by one switch complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian/RR Kable Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply and Fix wall/surface mounted LED batten 20W ,4 feet and luminous efficacy more than 100 lm/W with integrated sleek extruded polycarbonate Endura LED Channel available with 4000 K CCT with white acrylic cover and mounting accessories,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips Cat part No:Cat part No: BN 021 LED20S- 6500 PSU GR S1 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj

Supply and Fix wall/surface mounted LED batten 10W ,2 feet and luminous efficacy more than 100 lm/W with integrated sleek extruded polycarbonate Endura LED Channel available with 4000 K CCT with white acrylic cover and mounting accessories,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips Cat part No:Cat part No: BN 021 LED10S- 6500 PSU GR S1 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj

Note: Orginial GST paid PV's/TC for the materials procured for the above BOQ items shall be produced alongwith the payment claimed by the contractor.

MURUKAN BUILDERS

VVM CONSTRUCTIONS

CHANDRASEKRAN ENTERPRISES