SPECIAL REPAIRS TO B TYPE MD ACCN IN DRDO TOWNSHIP PH II CV RAMAN NAGAR BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for coloured non-skid joint less ceramic tiles of grade B II a / B II b of size 7 to 8 mm thick area of each tile exc. 0.06 sqm but n.exc 0.11sqm in floor etc set and jointed in neat cement slurry and pointed in epoxy grout to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M&L for glazed coloured ceramic joint free tiles of grade B III in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in epoxy grout to match coloured tiles, including 10mm thick backing in cement mortar (1:3) complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by GE.

Roughening surface of old concrete floor by picking,sweeping clean and washing with water to remove dust complete all as specified and directed.

M&L for Coloured Non Skid Joint less ceramic tiles of grade B II a / B II b of size 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set over 5mm thick Polymerised adhesive bed and pointed in epoxy grout to match, complete all as specified and directed . Note: The colour / shade / design of tiles shall be as approved by GE.

M&L for Coloured Non Skid Joint less ceramic tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in epoxy grout to match as in skirting over 10mm thick backing in cement mortar (1:3) complete all as specified and directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M&L for Machine cut Kota stone slab 20-25mm thick in as tread and riser of steps, skirting, dado and pillar laid over cement screed / backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

M&L for Rendering 10 mm thick CM (1:3) on fair faces of brick work or concrete surfaces as in backing of kota stone skirting etc, complete all as specified and directed.

Taking down cement plaster on walls any description including racking out joints hacking for key and scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 (river sand) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on brick masonry surface in two layers, base layer 10mm thick in CM (1:6) and top layer 5mm thick in CM 1:6 (with river sand) mixed with WPC as per manufacture's instructions, finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of akali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 13489:2004, Alkali & fungal resistance, dirt risistance exterior paint of required shade with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm, complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

Complete removal of existing treatment including preparating surfaces on walls and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 13489:2004, alkali & fungal resistance, dirt risistance exterior paint of required shade with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over old surfaces, complete all as specified and directed.

Complete removal of existing treatment on wall surfaces including preparation and applying one coat of primer and two coats of oil bound distemper on walls including applying 2 mm thick wall putty in two layers, complete all as specified and directed.

Complete removal of existing treatment on ceiling surfaces including preparation of surface and applying two coats of white wash, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 ltrs capacity low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

Refixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete complete all as specified and directed.

Supply only 100 mm bore cast iron trap 'P' or 'S' type suitable for IWC complete all as specified and directed.

S&F in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but inluding fixing of supply and waste pipe and coupling complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick SS sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs chromium plated fancy type angular stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed.

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed.

S&F in repairs Bib Taps 15 mm bore cast copper alloy fancy type Chromium plated, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15mm complete all as specified and directed.

All as per item No. 34 above, of size 20 mm.

All as per item No. 34 above, of size 25mm.

S&F, Steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified and directed.

All as per item No. 37 above, but of size of 20mm bore Steel water tubing medium grade

All as per item No. 37 above, but of size of 25mm bore Steel water tubing medium grade

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

All as per item No. 40 above, but of size of 20 mm bore Steel water tubing medium grade

All as per item No. 40 above, but of size of 25 mm bore Steel water tubing medium grade

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed.

Removing & Refixing of Old Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Demolition and breaking out drain pipes of any dia / type including necessary bend, 'T' and other accessories etc, complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid intrenches or in floors incuding necessary clamps etc complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incuding necessary clamps etc to fixing on walls complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) bends with access door complete all as specified and directed.

S&F, 75 mm bore PVC (SWR) branch piece, double (double 'Y') equal or unequal complete all as specified and directed.

S&F, PVC SWR reducer one end 110 another reduced 75mm complete all as specified and directed.

S&F, PVC in repairs (SWR) floor trap diameter of out let 75mm, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed. Note: Cement concrete shall be measured and paid separately.

Dismantling water tanks exc 500 Ltrs capacity & n exc 1000 Ltrs and removing to store complete all as specified and directed.

S&F, rotational moulded polyethylene water storage tanks, 3 layered (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position complete all as specified and directed in SSR Part I.

Disconnecting existing tanks, of capacity exc 500 ltrs but n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m but nexc 2 Sqm each and removing to store complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in bed plates, kerbs, hold fast concrete etc, complete all as specified and directed.

S&F, Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F, Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L for PCC 1:3:6 type C0 using 12.5mm graded stone aggregate as in filling the chowkats / frames complete all as specified and directed.

S&F, 35 mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&F, 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered, complete all as specified and directed.

M&L for preparation of new wood / wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over a existing paint complete all as specified and directed.

S&F, butt hinges, 100 mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F, 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F, 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F, 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F curtain rail, chromium plated steel with fixing brackets, stops, rollers etc fixed in repairs complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Dismantling of composite steel windows / ventilators shutter of area n.exc 0.60 Sqm single leaf including glass panes, mosquito proof mesh etc, complete all as specified and directed.

Dismantling of composite steel windows/ventilators shutter of area exc 0.50 Sqm and not exc 1.00Sqm double leaf double shutter including glass panes mosquito proof mesh etc, complete all as specified and directed.

S&F, anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame / sliding tracks etc for windows with tracks including joining cleat for fixing etc, complete all as specified and directed.

S&F, anodised aluminium powder coated (minimum thickness of coating 50 micron) window and ventilator shutters sliding complete all as specified and directed.

S&F, anodised aluminium powder coated window and ventilator shutters, fixed / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F, aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F, MS framed work such as grills, gratings, railing, ladders, gate; wakways and similar works etc. confirming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for prelaminated particle board 18/19mm thickness, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F, continuous (piano) hinges width of flaps (when open 30mm), mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F, aluminium, anodised, barrel tower bolts of 100mm long extruded section and fixed complete all as specified and directed.

Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F, IInd class hard wood plain fillets, square, rectangular or triangular in section, wrought sectional area n.exc 3 Sqcm including polishing etc, complete all as specified and directed.

S&F, 100mm long aluminium anodised hasp and staples, safety type, with hinges including bolt to hingeplate and fixed with screws complete all as specified and directed.

S&F in repairs 20mm dia aluminium tubular rail as in curtain rods fixed in cup boards and pelmets complete all as specified and directed.

S&F in repairs aluminium brackets for fixing of curtain rods complete all as specified and directed.

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed bed in CM (1:4) complete all as specified and directed.Note: Colour and pattern of the tile will be decided by GE.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) of 75 mm thick as in plinth protection laid in panels, finishing the top surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick CM 1:3 on fair faces of brick work or concrete surfaces and finished fair and even without using extra cement with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Providing 1.00mm thick Brushbond RFX (which is a two component acrylic polymer modifiedcementitious coating which consists of Brushbond RFX powderand Nitobond BBX acrylic emulsion), grey in colour, of M/s FOSROC, using stiff brush, roller or trowel to obtain the desired thickness complete all as per manufacturer's instructions, complete all as specified and directed.

M&L for Plain cement concrete 1:5:10 type E2 (using 40mm graded stone aggregate) as in subbase of the sunken floors complete all as specified and directed.

M&L for removing all loose material, dust, cement off the narrow cracks and shall be cleared to form a V groove. The crack shall be filled / sealed with Fosroc or equivalent make cracked fillers (Repleroc cs crack filler) to ensure all as per the manufacturing instruction.

M&L for 10mm thick rendering in CM (1:4) over concrete surface, finished even and smooth without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for APP bases polymeric membrane minimum weighing 3.5 KG/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 160 gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @0.3 Ltr/Sqm by forced all as specified and as directed. Four course roof treatment consist of as under :- (i) Applying one coat of bituminious primer conforming to IS - 3384 @0.3 Ltr per sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying two coat of aluminium paint @100ml/sqm

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigments over sand cushioning all as specified and directed including taking down old paver tile etc, complete all as specified and directed.

M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Taking down unserviceable aluminium / copper point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, removing all aterial and issued under schedule of credit and making good the distrubed surface as the existing one, complete all as specified and directed.

Taking down unserviceable DBs of any type and size complete including MCBs / Isolator / ELCBs / Industrial Sockets complete all as specified and directed.

Taking down unserviceable aluminium / copper submain wiring any size complete with fittings such as conduits / caping casing, removing all material and issued under schedule of credit and making good the distrubed surface complete all as specified and directed.

Taking down ceiling fan / exhaust fan from ceilings and of any type and size, cleaning, servicing, greasing to bearings checking of nuts bolts, safety split pin, bushes, capacitor and painting and refixing complete testing all as directed and specified by Engineer-in-Charge.

M&L for point wiring complete with multi stranded copper conductor size 1.5 Sqmm PVC insulated, sheathed FRLS cable 1100 volts grade conforming to IS 694 multistranded, drawn in and including cutting wall / surface with rigid PVC conduit flushed on walls / floors / ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 Sqmm PVC insulated sheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the walls / floors / ceilings and repairing with existing surface after work complete all as specified and directed by Engineer-in-Charge. One light point controlled by one 5 Amps one way switch using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing).

All as per item No.114 but for One fan point controlled by one 5 Amps one way switch

All as per item No.114 but for One light point controlled by two 2 way switches

All as per item No.114 but for One bell / buzzer point controlled by one push button

All as per item No.114 but for One 3 pin socket outlet 5 Amps on the same board

All as per item No.114 but for One 3 pin socket outlet, 5 Amps on independent board

All as per item No. 114 here-in-before, but using copper conductor 2.5 sqmm PVC insulated sheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps socket outlet independently complete all as specified and directed by Engineer-in-Charge.

S&F, switch modular type single pole 1 way, 6 Amp, 1 module, 230 Volts complete all as specified and directed.

S&F, switch modular type single pole 2 way, 6 Amp, 1 module, 230 Volts complete all as specified and directed.

S&F, switch modular type 1 way 16A, 1 module complete all as specified and directed.

S&F, socket 6 Amps modular type 2/3 pin combined 2 module, 230 volts grade complete all as specified and directed.

S&F, socket modular type 6A/16A 2-3 pin combined 2 module 230 Volts grade complete all as specified and directed.

S&F, ceiling rose surface backelite three terminal complete all as specified and directed.

S&F in replacement of modular bell push 6A 1 module complete all as specified and directed.

S&F, electric bell multi music type single phase 240 Volts, 50 Hz complete all as specified and directed.

Supply & fixing stepped electronic fan regulator modular type 100 watt, 230 volt complete all as specified and directed.

S&F, exhaust fans steel body with AC single phase 230 / 240 V of size 300 mm sweep with louver complete with all connections with making a hole including all fixing arrangement complete all as specified and directed by Engineer-in-Charge.

S&F, bakelite angle holder PVC / polycarbonate type with cord grip cap suitable for batten fittings complete all as specified and directed.

S&F, LED lamp of 7 watts complete all as specified and directed.

Supply and replace exisitng FTL fittings with energy efficient LED Batten fitting 20 Watts surface mounted with extruded aluminium housing with diffuser complete all as specified and directed by Engineer-in-Charge.

Supply and replace existing CFL/FTL fitting with energy efficient LED mirror light fitting 09 Watts surface mounted translucent acrylic diffuser including driver and accessories complete all as specified and directed.

Supply and fixing LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete.

S&F in replacement MCB DB TPN 4 Way 415 volts double door with 200 amps rated aluminium bus bar complete all as specified and directed.

S&F in replacement MCB DB SPN 16 Way 240 volts single phase double door with 200 amps rated aluminium bus bar complete all as specified and directed.

S&F, sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete including one number MCB SP 20 Amps complete all as specified and directed for AC and Geyser.

S&F in replacement MCB TPN 40 Amps suitable for 415 Volts three phase complete all as specified and directed.

S&F in replacement MCB SPN 32 Amps suitable for 240 Volts single phase 'C' Series complete all as specified and directed.

S&F in replacement MCB SP 6 to 40 Amps 10kA 240 Volts single phase 'C' Series complete all as specified and directed.

M&L for sub main wiring complte with 2 runs of 6 Sqmm PVC insulated and sheathed FRLS cable 1100 Volt with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits of size 25 mm dia and conduit accessories concealed / run on surface of wall / floors / ceiling etc and connecting terminal ends including 1 run of 6 Sqmm FRLS cable of 1100 volt of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly complete all as specified and directed. Note: 3 runs of 6 Sq.mm & one run of PVC conduit with accessories will be measured as RM.

M&L for sub main wiring complte with four runs of 10.0 Sqmm PVC insulated and sheathed FRLS cable 1100 Volt with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits of size 32 mm dia and conduit accessories concealed / run on surface of wall / floors / ceiling etc and connecting terminal ends including 2 run of 10.0 Sqmm FRLS cable of 1100 volt of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly all as specified and directed. Note:6 runs of 10 Sq.mm & one run of PVC conduit with accessories will be measured as RM

M&L for earthing complete with GI plate electrode 60 x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25M below ground level with the top edge of earth plate at a depth of not less than 1.5m below normal ground level connected to earth lead of 32 x 6 mm GI strip by means of bolts, nuts, check nuts, washers of GI and GI strip, protected by GI pipe 40 mm bore, medium grade and 15 mm medium grade for water with wire mesh funnel all as shown on electrical plate No. 03 of SSR Part-I complete including necessary excavation & earth work in any type of soil and PCC (1:3:6) type CI using 20mm graded stone aggregate earth chamber, RCC (1:2:4) type B1 cover slab 40mm thick complete including testing all specified and directed including taking down the unsv old earthing complete. Note: Quoted rate includes GI pipe medium grade 40 mm and GE strip 32 X 6mm upto 7.5m

N RAJEGOWDA and CO

C R R CONSTRUCTIONS

Lucky Enterprises

ABHISHEK CONSTRUCTIONS