Modernization of 19 Nos. Rural LRs incl. 5 Years Maintenance (1 Year DLP plus 4 Year Maintenance) in Market Committee JBD/GHS, Dist. Fzk/Fzr (SR Programme Year 2025-26 under the Scheme Special Assistance to States for Capital Investment 2025-26)

Part-I (Repair Work)

Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one metre interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead complete as per technical clause 404 of MORT&H specifications (Full surface area will be measured for payment) Strengthening Portion ( Type -I)

Dismentalling stone pitching or soling (Existing road Crust Dismentalling)

Dismantling of existing brick on end edging complete in all respect as per PWD specifications.

Compaction of earth work & Prepration of sub grade including Loosing levelling of eaeth 225 mm thick top layer , rough dressing of soil final dressing of earth to give level , camber, watering , rolling with road roller, compacting the bed to achieve minimum dry density as given in the table 300-2 as per techincial clause 305 of MORT&H Specifications (In case of link roads earth work to be done by Villgers)

Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Construction of granular sub base by providing material , spreading in uniform lyaers with mortor grader on prepared surface, mixing by mix ibn place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired dinsity, complete as per MORD technical specifications.(With Scarified material)

Construction of granular sub base by providing material , spreading in uniform lyaers with mortor grader on prepared surface, mixing by mix ibn place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired dinsity, complete as per MORD technical specifications.

Providing, Laying, Spreading and compacting stone aggregates of grading -I to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons (without screening for low volume roads /undesigned)

Providing,Laying, Spreading and compacting stone aggregates of grading -II to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons (without screening for low volume roads /undesigned)

Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications

Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause

Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm. laid with paver finisher mechnical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications

Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, carriage of mixed material to site of work, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications.

Kassi work undressed involving and average horizontal throw up to 2.0 Meters and an average vertical lift up to 0.50 Meters including breaking of clods.

Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at approved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications

Construction of 450mm dia hume pipe culvert complete as per Standard Drawing/Design

Repair of parapet of existing hume pipe culvert complete as per PWD specification

Const. of side drain 1'wide x 1' height with 9" Wall

Reinforced cement concrete M-15 grade Kilometer stone of standard design for village roads s per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specification

Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications

Providing & fixing cautionary sign board (600x600x600) traingular with defination plate (600x200mm) as per IRC 67-2012

Providing & fixing cautionary sign board (900x600) rectangular

Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications

Videography of all the roads included in DNIT to be done before the start of any work. Videography to be undertaken in the presence of an officer not below the rank of SDE / JE. Two video copies of each road to be submitted by contractor. It must cover all reaches and aspects of the road.

(-) D/d Credit of old useful serviceable materials like Brick Bats & Bricks which obtained from Dismantling of existing brick edging:-

(i) Brick

(ii) Brick Bats

Heritage & Culture Cess @ 1.00%

PART-II Routine Maintenance work for 4 years (2nd year to 5th year)

Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 2nd Year)

Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 3rd Year)

Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 4th Year)

Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 5th Year)

Heritage & Cultural Cess @ 1.00% on Routine Maintenance Part-II