Providing, Supplying, Installation, Testing and Commissioning of Fire Hydrant at Pavti Jetty, Bucharwada, Diu. DPU-2371) (2nd Call)

Providing, supplying, installing, testing and commissioning Diesel Engine Driven Fire Pump Set having capacity of 2280 LPM at 70 metre head, driven by diesel engine of minimum 69 BHP, comprising horizontal end suction, centrifugal pump with cast iron casing, bronze impeller, stainless steel shaft and mechanical seal, capable of delivering the specified discharge while maintaining a minimum pressure of 3.5 kg/cm² at the highest and farthest outlet, conforming to relevant IS standards. The pump set shall be mounted on a common fabricated MS base frame and complete with flexible coupling, coupling guard, anti-vibration pads, foundation bolts, exhaust silencer, fuel tank, starting battery with charger, control panel, pressure gauges, suction and delivery manifolds, all accessories, interconnecting piping, wiring, testing and commissioning, complete in all respects as required and as directed by the Engineer-in-Charge. (Makes: Kirloskar / or equivalent)

Providing, supplying, installing, testing and commissioning Common Fire Pump Control Panel, suitable for automatic and manual operation of one 50 HP electric main fire pump, one 12.5 HP electric jockey pump and one diesel engine driven standby fire pump, fabricated from CRCA sheet steel, floor/wall mounted, dust and vermin proof, powder-coated finish, comprising incomer MCCB/SFU, TPN copper bus bars, voltmeter, ammeter with CTs, indicating lamps, Star-Delta starter for main pump, DOL starter for jockey pump, phase failure and phase sequence protection relays, auto/manual selector switches, push buttons, timers, auxiliary relays, contactors, engine control module with battery charger, DC ammeter, DC voltmeter, battery charger supply indication, engine running, low oil pressure, high water temperature, overspeed and fault indication lamps, pressure switches for automatic sequential operation of pumps, interlocking arrangement, cable terminals, internal wiring, terminal blocks, earthing, gland plates and all accessories, complete with necessary control wiring, power cabling from panel to pumps, testing and commissioning, conforming to IS 8623/IEC 61439, NBC, TAC and relevant IS standards, complete as required and as directed by the Engineer-in-Charge. (Makes: L&T/Simons/Sider or equivalent)

Providing, supplying and fixing dial type pressure gauge of approved make, 100 mm dial diameter, calibrated from 0–15 kg/cm², complete with brass isolation cock, copper impulse pipe with fittings, connectors, nipples and accessories, mounted on main fire fighting header, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: H. Guru or equivalent)

Providing, supplying, installing, testing and commissioning Pressure Switch Assembly, factory set at 9.0 kg/cm², comprising pressure switch, isolation ball valve, pressure gauge, brass fittings, nipples, sockets, unions, copper/GI connection pipe, mounting arrangement and all necessary accessories, complete with wiring, interconnection to fire pump control panel, testing, calibration and commissioning for automatic operation of the fire fighting pump system, complete as required and as directed by the Engineer-in-Charge. (Makes: H. Guru or equivalent)

Providing, supplying, fixing, testing and commissioning 100 mm dia. above ground heavy duty 'C' class G.I. pipes conforming to IS: 1239 (Part-I), including cutting, threading, welding, jointing and fixing with all necessary fittings such as flanges, bends, tees, elbows, reducers, unions, sockets, clamps, hangers, MS supports, angles, channels, anchor fasteners, nuts, bolts and gaskets, including one coat of red oxide primer and two coats of synthetic enamel paint of approved shade, complete in all respects as required and as directed by the Engineer-in-Charge. (Makes: Surya Roshni / Apollo /Asian or equivalent)

Providing, supplying, fixing, testing and commissioning 100 mm dia. Cast Iron Butterfly Valve, PN 1.6 rating, with integrally moulded EPDM/Nitrile rubber liner, stainless steel disc, stainless steel stem, lever operated, ISI marked, suitable for fire fighting system, complete with companion flanges, nuts, bolts, gaskets and all necessary accessories, including fixing, alignment, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: ISI/Karta or equivalent)

Providing, supplying, fixing, testing and commissioning 100 mm dia. Dual Plate Non-Return Valve (NRV), PN 1.6 rating, conforming to IS:5312, with cast iron body, stainless steel dual plates, stainless steel hinge pin and spring, suitable for fire fighting system, complete with rubber gaskets, G.I. bolts, nuts, washers, companion flanges and all necessary accessories, including fixing, alignment, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: ISI/Karta or equivalent)

Providing, supplying, fixing, testing and commissioning Stainless Steel Single Headed Oblique Pattern Hydrant Landing Valve, ISI marked and conforming to IS:5290, with 80 mm dia flanged inlet (160 mm PCD) and 63 mm female instantaneous outlet, complete with gun metal blank cap and chain, stainless steel operating hand wheel, all necessary nuts, bolts, gaskets and fixing accessories, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent)

Providing, supplying, fixing, testing and commissioning 63 mm dia × 15 m long Reinforced Rubber Lined (RRL) Hose Pipe conforming to IS:636 Type-A, complete with 63 mm dia instantaneous gun metal male and female couplings, securely bound with G.I. wire, copper rivets and all necessary accessories, suitable for fire fighting applications, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent)