Construction of Malaria Staff Office in Mandoli in Ward No. 54-E/263 Under Shahdara (North) Zone Sub Head- Provision of Electrical Installation

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B

Wiring for light/ power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2x2.5 sq.mm + 1x2.5 sq.mm earth wire

(b) 2x6 sq.mm + 1x6 sq.mm earth wire

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 5/6 amps switch

(b) 3 pin 5/6 amp socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recees including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 6 way Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Single Pole)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 40 amps

Supplying and fixing 25 A rating, four pole,( Single phase and neutral) 240 volts, residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the exisiting MCB DB complete with connections, testing and commissioning etc. as required.

supply, installation, Testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Currect (BLDC) Motor, class of insulation:B, 3 nos blades, 30 cm down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, Earthng etc. complete as required.

Earthing with G.I. earth pipe 4.5 mtr long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Up to 35 sq mm (clamped with 1 mm thick saddle)

S/I/T/C of 15 (380mm) sweep Fresh Air fan heavy duty complete with shutters, blades etc as reqd.

Providing and fixing circular/Hexagonal cast iron of MS sheet box for ceiling fan clamp of internal dia 140mm, 73 mm height, top lid of 1.5 mm thick MS sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ MS sheet box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be mad eof 12 mm dia MD bar bent to shape as per standard drawing.

S/I/T/C of LED Tube type luminaire 20 watt BOX TYPE rating complete with Extruded Aluminium Batten prewired with hgh efficient LEDswith the following: (A) Total system wattage 20 watt+/- 5% (B) Luminous efficacy lumens/watt >=95 ( C ) Power Factor >=0.95

Supplying, lowering, testing and commissioning of 0.5 H.P. single phase mono self priming pumping set having speed 1500 RPM suitable for a head of 18 to 45 mtr. Discharge 2800 to 880 LMP amd suction / delivery 25X25 mm suitable to work 180 to 230 volt, A.C. supply including testing commissioning etc as reqd.

Supply of PVC insulated XLPE and PVC Sheathed Al conductor armoured cables conforming to IS1554 (Part-I) /7099 as required. Elec43.a 2x10 sqmm

SITC of 150 W LED Flood Light luminiare fitted with lense, made of pressure die cast aluminium housing & toughned glass cover complete with the following specification as reqd with 5 year warranty. (a) Total system wattage =150 watt +/- 5 (b) Total Lumens output >= 15000 lumens (c) Luminaire Efficacy>=100 Lm/w (d) Power Factor>=0.95 (e) Protection Class- IP-66

P/F Hot press sheet moulded compound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof pole box of inner dimension 200x160x98mm (NS) complete with suitable arrangment for fixing of 1 nos of 6 to 32 amp single pole MCB (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc as reqd. ( Without MCB)