Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.6 Craccepted-finance | ₹2.6 Cr | accepted-finance |
Tender Value
₹2.8 Cr
EMD Value
₹4.2 L
Closing Date
18 Mar 2026, 10:50 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Renovation
PWD/2025-26/BD/WORK_INDENT32736/CALL-2
PWD/2025-26/BD/WORK_INDENT32736/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
5 documents required · 5 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b) Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work of value not less than Rs.141.06 Lakhs (Usually not less than 50% estimated value of contract)
3.2 To qualify for award of this contract each Tenderer in its name should have in the last five years i.e.2020-21 to 2024-25 (c)Executed in any One year, the minimum quantities of work as follows1)Chairs/Tables-182 Nos,2) Wooden Wall panelling -288 Sqmt,3)Wooden Partition -1191 sqmt
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a) Achieved in at least two financial years a Minimum financial turn over (in all classes of civil engineering construction works only) of Rs 564.24 lakhs (Usually not less than two times the estimated annual payments under this contract)
3.3 Each Tenderer should further demonstrate: (b)Liquid assets and /or availability of credit facilities of not less than: Rs.84.64 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/Scheduled banks) for meeting the fund requirement etc.
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 06 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 06 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
Registration Certificate class 2 and above
nill
nill
nill
nill
nill
nill
nill
nill
nill
nill
₹5,000
₹4.2 L
18 Mar 2026
11 Mar 2026
20 Mar 2026
18 Mar 2026
16 Mar 2026
Renovation of Superintending of Police and Police Inspector rooms on first floor 24 2 26 Rooms at 1st stage, M.S. Building, Bangalore
Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...
Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexpos...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
1. The surface to ...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered Glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engine...
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engin...
Providing Sal wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and of...
Repairing and fixing shutters (panelled or glazed) to doors, windows,
ventilators and cupboards.
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as ...
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with ...
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials to the appropriate disposal area as per ...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing Towel rail 450mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Premium
Providing and fixing toilet paper holder : C.P. brass
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
PVC pipe - OD 110mm and 6 Kg/sqcm
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy
Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing & Supplying of Executive table of approved brand of equivalent of size 2300mm x 900mm x 760mm with storage unit and side unit cum table., including the cost of all materials, labour and tran...
Providing and Supplying of Executive Table finished with Approved Laminate with Right Side Cabinet includes 2 Drawers with Lock 1 Swivel Door with CPU Space includes Alloy Wire box with Cable Manager ...
Supplying and fixing Medium back Leatherette Chairs with knee tilt, with Gas Lift, Lumbar support of featherlite/ Godrej or equivalent make, including the cost of all materials, labour and transportat...
Providing And Suppiving High Back Chair genuine Leather Upholstery, White PP Seat Shell, Alu. Alloy 5 star Base, high Adjustment and Synchro tilt Mechanism with Multi Position Locking And Automatic Te...
Providing and Supplying Low Back Chair Cushioned Backrest and Seat of black Leatherette Material with Knee tilt and gas lift with chrome base of Godrej Featherlite or Equivalent make. including the co...
Providing and Supplying of Executive High Back Mesh Chairs or equivalent make, with Head rest and multi lock, gas lift of Helix series of featherlite/Godrej or equivalent make, including cost of mater...
Providing and Supplying Medium Back Revolving chairs with Mesh Back And Soft Cushioning Seat, Fixed lumber Support and Gas Lift, Knee tit Mechanism of featherlite/Godrej or equivalent make, including ...
Providing, Supplying and fixng meeting table made out of 25mm High Density Fibre Board with both side laminate of approved colour and shape with 4 sides Vertical Support with 19mm Both side laminated ...
Supplying and fixing SIDE TABLE of size 400x400mm suare shape made out using 19mm thick plywood with 4mm thick veneer sheet for all exposed edge faces with suitable adhesives, compete. The work includ...
Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 25mm thick water proof block board for shutter and 19mm plywood for allround ward robe, openable shutters with 25mm x 6mm thick...
Providing and fixing panelling of plywood to a height of 10' made out of 12mm plywood and MDF finished with veneer and laminate from outside with the veneer beading as per design with full wall covere...
Supplying of 5" SS Hinges (SE Letter No. 559/2021-22 dated: 21/06/2021 Sl No. 17d)
Providing & fixing Tower bolt (SE Letter No. 559/2021-22 dated: 21/06/2021 Sl No. 17d)
Supplying of SS Door stopper (SE Letter No. 559/2021-22 dated: 21/06/2021 Sl No. 17j)
Wooden Mobile Pedestal Unit with Cushion:- Providing & placing position Pedestal unit of 450mm x 450mm x 600mm ht. Pedestals are made from 19mm thick prelaminated PLPB Board with matching colour edge ...
Providing and fixing Jaguar make Health Faucet with 1.00m flexible aluminium coated tube and hook including necessary threads, white lead, washers etc., complete. The rate including necessary threads,...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW -4 32736 call-2.docx
Tender Document • 0.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .