Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance 31 TILAK NAGAR SRI GANGANAGAR 335001 RAJ | GANGANAGAR | RAJASTHAN | 335001 | Admitted-Finance |
| 5 | Admitted-Finance RCP GURUDWARA ROAD WARD NO 29 SURATGARH SRI GANGANAGAR 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
REPAIRS / MAINT OF LT DISTRIBUTION NETWORK AND CONNECTED ITEMS AT MIL STN SRI GANGANAGAR
2023_MES_629041_1
GE SGNR/TOK-61 OF 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class b(i) and for un-enlisted, refer NIT para 8
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹80,000
Yes
16 Mar 2024
20 Nov 2023
20 Dec 2023
20 Nov 2023
18 Dec 2023
4 Dec 2023
Amount
Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.
All as per item No 1 above but depth exceeding 1.5m and not exceeding 3.0m complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge
Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .
M & L for sand cushioning with dry coarse canal sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.
M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.
M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation for poles, stays & mass concrete complete all as specified and directed by Engineer-in-charge
M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in pedestal coping of poles etc including weathering, slightly rounded or chamfered angle and necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed by Engineer-in-charge
Taking out/down unserviceable, defective any Type/size cable including disconnecting/dismantling all the electrical connections all as required at site and complete all as specified and directed by Engineer-in-charge
Supplying, laying, jointing and testing and commissioning of 25 sq mm, 4 core PVC insulated, screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duty multi stranded aluminum conductor & PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. Note: Excavation, earth work, sand cushioning and brick protection required for item shall be measured and paid separately under respective items of BOQ
All as per Srl item No 10 here-in-before but cable of cross sectional area 10 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 16 Sqmm, 4 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 50 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 70 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 95 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 120 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 150 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 185 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 10 here-in-before but cable of cross sectional area 240 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.
M&L in replacement for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth of not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia. by means of bolts, nuts and washers of the earth wire galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Complete all as specified and directed by Engr-in-charge. Notes: - (i) GI strip up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover
M&L in replacement for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron strip 32mm x 6mm thick as earth lead by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Complete all as specified and directed by Engr-in-charge. Notes: - (i) GI strip up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6mm galvanized iron strip complete all as specified and directed by Engr-in-charge.
Dismantling broken/damaged PCC Poles/struts, any size and removing from site complete all as specified and directed by Engr-in-charge.
Dismantling and taking out steel poles of any size etc complete all as specified and directed by Engineer-in-Charge.
Supply and erection steel tubular swaged swan neck poles 410-SP-31(09 m long) as per IS 2713-1980 complete with cast iron base plate final taper plug., cap, mild steel bolts,nuts & screws including applying two coats of black bituminous paint internally and externally upto planting depth and applying two coats ofaluminium paint over a coat of aluminium primer(external from top of coping) including writing MES Pole No with synthetic enamel paint(first grade/quality) and cutting vegetation growth all around and on the poles upto 1 meter radius complete all as specified and directed by Engr-in-charge. (Note:- Earth work foundation concrete shall be measured and paid seperately under relevant items)
Supply and fixing in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminum IP-66 road way luminaries 45 watt LED with high power LEDs as light source and electronic driver & surge protection device including testing complete all as specified and directed by Engineer-in-Charge
Supply and fixing in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminum IP-66 road way luminaries 70 watt LED with high power LEDs as light source and electronic driver & surge protection device including testing complete all as specified and directed by Engineer-in-Charge
M&L for surface excavation not exceeding 30 cm deep and averaging 15cm deep in soft/ loose soil and getting out including cutting of grass roots, bushes if any and filling of lower portion with soil obtained from cutting or dressing complete all as specified and directed by Engineer-in-Charge.
Dismantling insulators of any type and make including clamps from poles complete all as specified and directed by Engineer-in-Charge.
Dismantling and taking down cross arm of MS channel or angle section etc distance as directed complete all as specified and directed by Engineer-in-Charge.
Dismantling and taking down ACSR conductor of any size complete all as specified and directed by Engineer-in-Charge.
Dismantling of stay assembly complete all as specified and directed by Engineer-in-Charge
M & L for cutting road /plinth /hard standing for laying of pipe for passing cable through road without damaging Road / Plinth /Floor including making good with bitumen ready mix material as per existing specifications complete all as specified and directed by Engr-in-charge.
S&F in replacement street light timer switch i.e. nature switch which works on the basis of measurement of lux level of infra red rays along with enclosure box having dust and termite proof, outdoor type mounted on electric panel or on pole single phase with contactor, MCB rating 40 Amps with load bearing capacity of 5 KW complete all as specified and directed by Engineer-in-Charge.
S&F in replacement street light timer switch i.e. nature switch which works on the basis of measurement of lux level of infra red rays along with enclosure box having dust and termite proof, outdoor type mounted on electric panel or on pole three phase with contactor, MCB rating 20 Amps with load bearing capacity of 5 KW complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing cross arms, bracings, stiffeners, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size as indicated or directed complete all as specified and directed by Engr-in-Charge. Note: Exposed steel surface shall be treated with two coats of aluminum paint over a coat of red oxide primer and unexposed surface of steel sections shall be applied one coat of red oxide primer.
Supply & Fix aluminium conductor steel, reinforced (ACSR) of any size fixed on HT/LT poles fixed on insulators and binding with & including binding wire 14 SWG complete all as specified and directed by Engineer-in-Charge. Note : The weight of binding wire shall not be considered for payment.
M&L for Insulator Pin type, porcelain, vitreous, white,brown or green including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade, shall be in one piece and have a top groove and shall be threaded to take galvanised mild steel pin complete all as specified and directed by Engr-in-charge.
Supply and fix shackle type insulators, vitreous porcelain white, brown or green for working pressure 1100 volts grade of 100 mm height and 115 mm dia including galvanized mild steel straps of 31mm x 5mm size,14mm dia insulator bolts, washers and nuts complete all as specified and directed by Engineer-in-Charge.
Supply and fix stay assembly complete with accessories as shown in electrical plate No 1 using stay rod 20 mm dia x 1.8 metre long, stay bow 14mm dia and stay plate 30 cm x 30 cm x 6 mm including stay wire 8 SWG x 7 strands, loop type insulator, stay clamps and painting to exposed surfaces of mild steel work with two coats of aluminum paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. Note : Excavation, earthwork and PCC in foundation will be included under respective items of BOQ.
Supply & fix continuous earth wire/guard cradle hexagonal rectangular, fabricated out of 3.15 or 4mm dia galvanized steel wire including mild steel wire of 1.63mm dia complete all as specified and directed by Engr-in-charge. Note For payment purpose weight of 3.15 or 4 mm dia galvanized wire shall only be taken and clips & clamps eye hooks shall be measured and paid for separately.
M&L for opening the joints of HT / LT overhead conductor from the end of poles, re-stretching the overhead aluminum conductor with chain pulley and other T&P machineries, refixing the overhead conductor at the same place such that sagging of conductor is not more than 3% complete all as specified and directed by Engineer-in-Charge.
Cutting/ trimming of tree branches not exc 10cm girth touching/approaching the LT/HT overhead lines with hack saw/axe to clear the LT/HT line upto 3 metre on each side (Horizontal and / or vertical) including disposal of trimmed branches 2 KM away inside the cantonment area & clearing site complete all as specified and directed by Engineer-in-Charge. Note :- 3 metre width on each side of LT/HT line shall be cleared and each span having not less than 3/5 conductors and min30-40 m pole to pole distance.
Supply and fix in GI pipe 80 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directed by Engineer-in-Charge. NOTE: Clamps & nut bolt required for fixing included in item rate. Excavation & earth work shall be measured and paid separately under respective item of this BOQ
All as Item No 44 above but 50 mm dia pipe complete all as specified and directed by Engr-in-charge.
Laying only existing surface cable( LT/XPLE/PVC cable) to undergroundof size ranging 10 Sqmm 2 core to 16 Sqmm 4 core including disconnecting it and reconnecting using lugs cable and gland etc all as specified and directed by the Engineer-in-Charge Note Excavation, earth work, and protective work shall be measured and paid separately under respective items
Laying only existing surface cable ( LT/XPLE/PVC cable) to underground of size ranging 25 Sqmm 4 core to 120 Sqmm 3.5 core including disconnecting it and reconnecting using lugs cable and gland all as specified and directed by the Engineer-in-Charge Note Excavation, earth work, and protective work shall be measured and paid separately under respective items
S&F on pole / wall /in panel , Sheet metal enclosure Bus bar chamber consisting 4 pole 400 Amp 415 volts ,copper bus bar with provide suitable MCCB for connecting cable as a junction including connecting of existing cables with suitable sizes aluminum thimbles all as specified & directed by Engineer-in-Charge.
Description all as per srl item No 47 but capacity 200 Amp 4 pole 415 volt all as specified & directed by Engineer-in-Charge.
Description all as per srl item No 47 but capacity 100 Amp 4 pole 415 volt all as specified & directed by Engineer-in-Charge.
Supply and fix in replacement Hot moulded (FRP) junction box of size 240mm x 160mm x 110 mm for street light pole with locking arrangement with 32 Amps, 4 way heavy duty terminal block suitable connection for three phase incoming cable three phase outgoing cable and single phase connection for light fittings with control MCB SP 2.5 Amps 01 Nos enclosed in thermoplastic box in closed shock proof safe IP 65, weather, vermin proof, dust and water proof complete with two number cable entry gland of standard size with suitable size mild steel clamps of size 25x3mm with nut and bolt to fix on pole complete all as specified and directed by Engineer-in-Charge.
Dismantling LT Panel board including all control cable , main switch ,cut out ,change over ,bus-bar ,porcelain chair/bakelite,insulator,all rusted ,nuts bolt washer and refixing after repair / replacement works mention below complete all as specified and as directed.(i)Cleaning & grinding the bus-bar with carbon tetrachloride solution and provision of non adhesive colour coated tape for appropriate phase (R,Y,B) and neutral (black) over the bus-bar.(ii) Replacement of all nuts,bolt ,washer ,cable glands and porcelain insulator.(iii) Welding/brazing the sheet metal enclouser at the rusted places including making necessary.(iv) M&L for spray painting with synthetic enamel paint of existing colour over a coat of red oxide primer externally & internally including numbering complete all as specified and directed by Engr-in-charge.
S & F with alternation and modification of LT Panel for smooth functioning of MCCBs door for closingin replacement of MCCB 400 Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.
S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 315 /350Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.
S&F in replacement of MCCB, with alternation and modification in the Panel so that after installation of MCCB, panel door of MCCB will closed wihout any hindernance, MCCB 250 Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.
S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 200 Amp, four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.
S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 125 Amp, Three pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 16KA complete all as specified & directed by Engineer-in-Charge.
S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 63 Amp, three pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 16 KA complete all as specified & directed by Engineer-in-Charge.
Supply and fix copper busbar as per existing size of bus bar including mounted on saddle /porcelain insulator with screwing and making hole and connection for cables,MCCBs etc after testing of completion of works complete all as specified and directed by Engr-in-charge.
Supply and fix Aluminium busbar as per existing size of bus bar including mounted on saddle /porcelain insulator with screwing and making hole and connection for cables,MCCBs etc after testing of completion of works complete all as specified and directed by Engr-in-charge.
Taking out unserviceable analog type voltmeter from the panel boards, supply and fixing analog type voltmeter of 0-500 volt range suitable for three phase supply including connection and testing complete all as specified and directed by Engr-in-charge.
Taking out unserviceable analog type ammeter from the panel boards, supply and fixing analog type ammeter of 0-500 Amps range without CTs suitable for three phase supply including connection and testing complete all as specified and directed by Engr-in-charge.
Taking out unserviceable LED type indicator lamp unit from the panel boards , supply and fix LED type indicator lamp unit of red/ yellow/ blue/ green/ Amber with bulb including connection and testing complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered or unplastered surface of wall and applying two coats of white wash complete all as specified & directed by Engineer-in-Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
HARSH CONSTRUCTION CO.
Singla Electricals
SRI SAI CONSTRUCTION COMPANY
Akarsha Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .