Construction of Range Office Mattan.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: a) Foundation Buiding Walls (raft). b) Front Stairs. C) Septic tank d) Soak Pit

Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriages complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.M20 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size)

a. Raft U/G

b. Septic Tank Slab

c. Soak Pit

d. Kitchen Counter

e. Lintel Beam/porch

f. RCC Slab Front Span

g. RCC Slab Back Span

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundation/ Footing Upto Plinth Level

Lintel Beam / Kitchen Counter

RCC Slab Front Span / RCC Slab Back Span / Septic Tank / Soak Pit

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 25mm thick with 12.5 mm nominal size stone aggregate.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and 12 binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.@ 100Kg/cum of RCC 1:1.5:3

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :

Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone incl.all carriages complete a) Soak Pit

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 9.1.5 First class kail wood3"x5"

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters (First Class KAIL WOOD 35 mm).

Providing and fixing of Glass Panes 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing 35 mm thick wire gauze shutters using galavanised M.S wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors ,windows and clerestory windows including ISI marked bright finished or /and black enamelled M.S butt hinges with necessary screws. [first class kail wood]. Quantity Calculated Above

Providing & fixing ISI marked oxidized M.S tower bolts black finish (Barrel Type) with necessary screws etc complete job. 200X10 mm including all carriages of material from approved source up to site of work complete.

Providing & fixing ISI marked oxidized M.S Handles with necessary screws etc complete job. 125 mm including all carriages of material from approved source up to site of work complete.

Providing & fixing ISI marked 85 mm x 42 mm oxidized M S pull bolt lock with necessary screws, nuts, bolts etc including all carriages of material from approved source up to site of work complete.

Providing & fixing oxidized M S casement stays (straight peg type) with necessary screws etc complete job. 250 mm weight not less than 150 gram including all carriages of material from approved source up to site of work complete.

ROOFING

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing high Rib Green Colored G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width Green Colored G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valleys of 90cm wide overall in Green Colored G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.25 mm thick with zinc coating not less than 350 gram/m2

Providing and Fixing of 2"x2" ist class budloo frame for the base of Soffit to be fixed vertical/horizontal at 1.5 feet gap

Providing & Fixing of 300X40 mm wooden Eaves boarding for truss work. (First Class Kail Wood).

Providing & Fixing of 20 mm thick wooden planks with T & G ceiling Soffits. (First Class Kail Wood).

12 mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Interior Walls

15 mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Exterior Walls

Ceiling Plaster

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 500x500 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & fixing ceramic glazed floor tiles 300x300 mm ( thickness to be specificed of ist quality ) of approved make in all colours & shades in cement motor 1:4 mix.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (18mm)

Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work. (Hard & soft wood).Windows/Doors/Soffit /Eaves boarding

Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work. Same as above qty.

Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. Same as calculated in Interior walls plaster,with 10% in jambs and ceiling.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing of 12mm thick Foreign Wood Ist Class wooden panelling in walls duly fixed with dash fasteners including sandpapering and polishing of required shade,etc complete Job

Providing and fixing of Kitchen Counters using teak wood, Wooden Mica(Den-Mica) including all required standrad accesseries/items complete.

SANITRAY & WATER SUPPLY

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets,including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040x bowl depth 178mm

Providing and fixing of mirror of superior quality with all fittings and fixtures complete.

Cutting holes up to 30x30cm in walls i/c making good the same with common burnt clay FPS non modular bricks

Cutting holes up to 15X15 cm in RCC floors and roofs for passing drain pipes etc. and repairing the hole after insrtion of drain pipe etc. with cement concrete 1:2:4 ,20mm nominal size , i/c finishing complete so as to make it leak proof.

Providing and Fixing PPR pipe lines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/ sockets etc wherever required of following nominal sizes

25mm dia

20mm dia

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Health fucet

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing ball valve (brass) of approved quality, with all fittings and fixtures complete.

25 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing gun metal gate value C.I wheel of approved quality (Screwed end )25mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete.

Providing and fixingof Gyser Venus make ISI 50litre Capacity with all necessary fittings.

Providing and fixing Polyvinyl Chloride (PVC) pipes, incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work

75 mm nominal dia .Pipes. Vent pipe

75 mm nominal inner dia .Pipes.

100mm nominal inner dia .Pipes.

Providing and fixing Polyvinyl Chloride (PVC) fittings for pvc pipes

P-Trap

100mm door tee

100 mm bend with door

100 mm bends

100 mm TEE

100 mm Connector

75mm Flow Trap with jali

75mm Door Tee

75mm bend with door

75mm Bend

75mm Connector

75mm Tee

Reducer 100mm x 75mm

Vent Cap 75mm

Constructing masonry main holes 60x60x45 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. complete job

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Supply, installation, testing and commissioning of following electrical equipment / items as per technical specifications and directions of Engineer-in-Charge as required. The electric fitting shall be concealed type and shall be run upto external face of the wall of the structure near main door. All wiring shall be concealed type & PVC insulated copper flexible wiring as per the specification of IS Code for different circuits of approved make like Havels/Anchor etc with tube lights and false ceiling lights in sufficient Nos. for providing proper visibility in each room . Standard branded companiesas per the IS Specifications in all habitable rooms and Cieling Fans,exhaust fans in toilets etc. of reputed Brands.

Lighting points (1.5mm sq. wire).

Lighting Circuits with (2.5mm sq. wire).

Heating Points with SS combine (4mm wire ,15 Amp).

Generator /Inverter fittings Lighting points (1.5mm sq. wire).

Three pin Socket.

Half Indicator Points

Iron D Box of standrad make,18 way.

MCB DP 32- Amp

MCB DP 40- Amp

MCB DP 63- Amp

Service Line (7/16 wire)

Exhuasters

Fan Points with 48 inch Sweep ceiling Fans.

Concelead LED Bulbs.

Changeover Box 63 AMP.

Providing & Fixing up of Window / Glazing / Door curtain in required sizes having the specification as detailed below. The rates shall be inclusive of the cost of the curtain cloth, Lining cloth, stitching, Hanging arrangement and Fixing of the curtain The bracket used for hanging the curtains shall be good quality Stainless Steel Brackets, shall be side mounted or front mounted or ceiling mounted as required at site. Curtain Rods shall be stainless steel pipe -1" (25 mm) diameter, 22 Gauge with steel grade 304 or higher, Robust structure, Excellent Seamless finish. The end caps shall be of stainless steel. Where curtain is used as a partition/ long length, sufficient support from ceiling should be provided to avoid sagging. All hardware used in the work shall be of good quality. The samples of the brackets, pipe, end caps, eyelets, etc. and other hardware such as ceiling suspenders, fasteners, etc. is to be got approved before using the same in the work.

Providing and fixing of superior quality Foreign Wooden Chairs and table including spirit polishing and carriage complete

Normal Table

RO Large office Table including glass and accessories

RO Chair Movable

Office Chairs

Wooden Chairs

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

a) Bricks avg lead of 20 kms

b) Sand, stone aggregate below 40 mm nominal size avg lead of 35 kms

YAZDAAN CONSTRUCTIONS

M/s MOHD AMIN DUGGA

DAR CONSTRUCTIONS

KHURSHEED AHMAD GANIE

S A CONSTRUCTIONS