Repair work of the newly created sub-registrar office located in Manikpur block of Chitrakoot district.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.As per DSR-2023 15.56

12mm thick plaster 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement.As per DSR-2023 13.4.1

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As per DSR-2023 13.80

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/itre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/lit.As per DSR-2023 13.4.1

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sgm.As per DSR-2023 13.46.1

Cement concrete1:2:4 (1 cement :2 coarse : 4 graded stone aggregate 20 mm nominal size).As per DSR-2023 22.14.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confoming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cemenl : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sgm includlng grouting the jolnts with white cement and malching pigments atc., complete. size of tiles 600x600 mm As per DSR-2023 11.41.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slury @ 3.3kg per sgm, including pointing in white cement mixed with pigment of matching shade complete. As per DSR-2023 8.31

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand). As per DSR-6.4.2

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.As per DSR-9.20.1

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete. 250x10 mm As per DSR-9.63.1

Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete. 300x20x6 mm As per DSR-9.65.1

Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work.Chap. No.10 New Item 1

Fixing panes of glass with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials labour and tools &plants, etc. required for proper completion of the work but excluding cost of glass.SI NO 812(ii)

Earth work in excavation For Foundation of apron step i/c all labour T&P SI NO 257

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km (5 miles) from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work.SI NO 255

Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. SI NO 281

Providing and fixing 15 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete work as in SI NO 201

Providing and fixing 20 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe as in SI NO 202

Making water connection of G.I. pipe line with G.I. main (25 mm. to 40 mm.) dia. As in SI NO 210

Supply and fixing brass bib cock heavy quality 15 mm. dia. (400 gms.) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.As in SI NO 237

Supply and fixing brass stop cock heavy quality 15 mm. dia (400gms) ISI marked including cutting and threading the pipe, if required including supply of all materials, labour and T&P etc. required for proper completion of the work.As in SI NO 245(a) New item

Supply and fixing of low density polythene tank sintex or equivalent.As in SI NO 246 New item

Provide and fixing of first quality white glazed Orissa pattern WC pan Hindustan, Cere make. as in item no.-301(a) new item

Providing and fixing 550mmx400 mm. wash hand basin of white glazed earthen ware 1st quality ISI marked Hindustan, Neyer, Cera make Complete work. As in SI NO 306

Providing and fixing good quality rubber plug 32 mm. dia. For sink or lavatory basin including supply of all materials, labour, T&P etc. required for proper completion of the work. As in SI NO 325

Providing and fixing 600 mm. x 450 mm. bevelled edge mirror of Atul, Kiron make glass with Indian polish 6.50 mm. thick complete with back of 600 mm. x 450 mm. x 6 mm. hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of the work. As in SI NO 332

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc. required for proper completion of the work.As in SI NO 336

Providing and fixing 5 cm dia HCI soil or vent pipe. as in Item No. 352

Providing and fixing HCI terminal guard 50 mm dia.as in item No. 361

Supply and fixing Nahani Trap Indian make of approved heavy quality complete with CP brass grating, Nahani trap laid over base cement concrete 1:6:12 including supply of all materials, labour, T&P etc. required for proper completion of the work.as in item No. 371

Please Enable Macros to View BoQ information