REPAIRS MAINTENANCE OF CERTAIN EM INSTALLATIONS INCLUDING BAFFLE RANGE AND MISC E M AND B R WORKS UNDER GE BELGAUM

Amount

Dismantling fencing posts or struts (wood, steel or RCC.) any section including taking out embedded portion and making good disturbed ground to match with the adjoining surface and steel scrap taken as credit complete all as specified and as directed .

Materilal and labour for Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate in foundations filling and mass concrete complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry in cement concrete blocks in PCC 1:3:6 type C1 ( using 20mm graded stone aggregate) set in cement mortar CM 1:6 complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.Note :Make of MS Galvanised fencing : SAIL/TATA/RINL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. complete all as specified and as directed .

Supply and fix Mild steel section for Post , hold fasts, flat iron, including securing nut bolts etc posts and struts in fencing , cutting tops to shape as directed ,drilling holes ,notching for wire etcflat iron filletyes(for securing wire mesh) including all necessary drilling,bolting or riveting etc confirming to Gde Fe 290 (Gde-E-165) complete all as specified and as directed

Material and labour for 10 mm dia Mild steel round bars,cut to length ,bent to shape including cranking,bending and binding with and including mild steel wire (annealed) not less than 0.90 mm dia confirming to , Fe-410-W 432 (Part I) (Gde-E-250) Part I quality-A for fencing complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing confirming to Fe 410 -W(Gde E-250 quality A complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. fixed with J-type or L-type hooks including dismantling of old unserviceable asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings and plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed. Note :Make of asbestos cement sheet : Ramco/ Shalimar /Visaka(ISI MARKED)

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed.. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Plain black mild steel sheeting 0.8 mm thick class 8, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed.. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Material and labour for Providing roof treatment with APP modified water proofing membrane with the following specifications complete. all as specified and as directed.

Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab ,tiles ,lime terracing and flashings and junction of parapets etc with wire brush including removal of debris outside the MOD premises

Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surface and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surface even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

Preparation of plastered surfaces by removing dust, dirt and applying oil bound bituminuous primer at the rate of 0.2 litre per Sqm and providing APP modified water proofing membrane weight not less than 3.0 kg/ sqm reinforced with non oven polyester mat of weight not less than 150gms per Sqm including minimum 10cm side/ over lap and applying a coat of hot blown bitumen grade 85/25 over membrane at the rate of1.2kg per Sqm and on drying applying a coat of solar reflective bituminuous aluminium paint at the rate of 0.1kg/sqm.

Demolition of brick /Stone/ PCC block masonry work built in cement mortar of any description and in any position and removal of debris off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced of any description and in any position and removal of debris off the premises complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100 mm thick as in paving including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 50 mm thick as in paving including necessary steel form work complete all as specified and as directed.

Material and labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for 75 mm Thick cement concrete type C- 1, 1:3:6 ( using 20mm graded stone aggregate) as in plinth protection including necessary steel form work complete all as specified and as directed.

Material and labour for Premium glazed ceramic coloured tiles of size 200x300x 5.5mm/350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Kajaria/Naveen

Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6completeall as specified and as directed.Note :Make of Tile :HR Johnson/Kajaria/Naveen

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar including removal of debris off the premises complete all as specified and as directed.

Material and labour for Chequered cement concrete tile of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including cement screed bed or bedding layer of mortar in CM 1:6 15mm thickcomplete all as specified and as directed.

Material and labour for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and labour for Rendering 5mm thick on concrete surfaces in CM 1:3 finishing ceiling surface even and smooth with out using extra cement including taking down plaster complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 with water proofing compound over 10mm thick backing coat in cement mortor 1:6 on fair faces of brick work/block masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed. . Note : water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and directed.. Make:Roff/Cico/Impermo

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a preparatory coat of 1mm thick wall care putty on wall complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a preparatory coat of 1mm thick wall care putty on wall including necessary preparation of wall surfaces complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall and applying three coats of white wash including necessary preparation of wall surfaces complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on ceiling and applying three coats of white wash including necessary preparation of wall surfaces complete all as specified and as directed.

Material and labour for Preparation of new surfaces of wall of any description and applying two coats of cement paint white or tinted paint over a coat of chalk whitening primer on walls complete all as specified and as directed.

Material and labour for preparing of old surfaces of wall of any description and applying one coat of cement paint white or tinted paint complete all as specified and as directed.

Material and labour for Preparing surfaces of new wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) of size exc. 1.50 sq. m but not exc 4.0 sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description of size exc 1 sq. m and n exc 2 sq. m each and taken as credit complete all as specified and as directed.

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal from site complete all as specified and as directed.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note:Make of glass:Saint Gobain/Modi Guard/Gold Fish

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Material and labour for Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing.complete all as specified and directed.

Material and labour for Factory made solid panel PVC door shutter 30mm thick (Style) as per IS-4020 consisting of frame made out of MS tube of top and bottom rails.MS frame shall be covered with heat moulded plain colourPVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings mentioned in SSR Part-II (Rates) 2020 complete all as specified and as directed.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed. (ISI MARKED)

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed. (ISI MARKED)

Supply and fix 150mm extruded Aluminum alloy handles, fabricated type, anodized complete all as specified and directed.Make:Crown/Classic/Adarsh

Supply and fix 100mm extruded Aluminum alloy handles, fabricated type, anodized complete all as specified and directed.Make:Crown/Classic/Adarsh

Supply and fix 150 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 300mm long Aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Make:Crown/Classic/Adarsh

All as described in item No. 57 here in before but fixed in repairs

Supply and fix Floor door stopper of aluminium allooy body and tongue anodised with 150mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed. Make :Crown/Classic/Adarsh

All as described in item No. 59 here in before but fixed in repairs

Material and labour for Powder coated aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc including dismantling of existing aluminium frame of any description and type and taken as credit complete all as specified and directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Make of Aluminium section :Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 micron

Supply and fix in repairs 15 mm bore Bib taps brass chromium plated fancy type screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Note :Make : Prayag/ Soma/ Leader

Supply and fix in repairs 15mm bore Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed. Note :Make : Prayag/ Soma/ Leader

Supply and fix in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Note :Make : Prayag/ Soma/ Leader

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Mmaterial and labour for PVC (SWR) nahani/floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and as directed. Note:Make:Finolex/Supreme/Prince

Supply and fix in repair PVC grating of 150mmSize (square or circular )complete all as specified and as directed. Note:Make:Finolex/Supreme/Prince

Supply and fix in repairs Vitreous china water closet, Pedestal type, white, including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including 'P' or 'S' trap etc.including provision of lime concrete bedding .complete all as specified and as directed.

Supply and fix PVC trap S/P/Q of size 125/110 mm complete all as specified and directed.Note:Make:Finolex/Supreme/Prince

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and32 mm dia PVC flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note : Make :Parryware (Slim Line ) /CERA/ Hindware

Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings ,PVC connection 600 mm long and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.

Taking down steel tubing and connections 25mm dia bore of pipe and taken as credit complete all as specified and as directed.

Taking down steel tubing and connections 20mm dia bore of pipe and taken as credit complete all as specified and as directed.

Taking down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Supply and laying 25 mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed on walls/ceilings or laying in floorscomplete all as specified and as directed. Note Make :Ashirwad/Astral

Supply and laying 20 mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed on walls/ceilings or laying in floorscomplete all as specified and as directed. Note Make :Ashirwad/Astral

Supply and laying 16 mm of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed on walls/ceilings or laying in floorscomplete all as specified and as directed. Note Make :Ashirwad/Astral

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make of PVC (SWR ) Pipe: Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.. Note : Make of PVC (SWR ) Pipe: Finolex/Supreme/Prince (ISI MARKED)

Dismantling of mild steel work of any description and in any position and taken as credit complete all as specified and as directed .

Supply and fix Rolled mild steel trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats and flat as in wind ties etc. conforming to grade Fe 410-W Gde E - 250 quality 'A' or Fe 310-0complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for cable trenches for laying of cable / pipes etc.and getting out in hard / dense soil including taking out old unserviceable bricks and taken as credit complete all as specified and as directed. Note:- (i) Existing sand cushioning for cable shall not be removed. (ii) Serviceable brickss stacked for reuse.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning using dry clean sand for protection of underground cable, consolidated and compacted complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 40 mm outer dia (SDR 17) as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply, lay and test in repair cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Supply and fix as in repairs HT/LT cable route marker 900mm long stand with top of oval/square shaped, two sides engraved with letters 'LT cable' or "HT Cable" letters painted with approved paint, embedded in ground including necessary PCC, excavation and earthwork complete all as specified and as directed.

Material and labour for Bus bar chamber cubical inclined top out door type made out of 3 mm thick MS sheet of size 450 x 300 x 200 mm including colou redaluminum busbar fixed on insulators vertically/horizontally in chamber of capacity 200 Amps for phase and 100 amps for neutral for incoming and out going. The panel shall be suitable for 415 volts, 50 Hz, 3 phase 4 wire system complete all as specified and directed. NOTE :--The Unit rate quoted by the tenderer shall includes earth work, PCC work and MS work2 etc and nothing extra shall be admissible on this account.

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittingss etc for passing of cables for mechanical proctection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall / floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hook bends / saddles including necessary threading / drilling works l and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for Cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 16 sqmm complete all as specified and directed. Make: Raychem / Denson/ M-seal.

Material and labour for Painting old surfaces of Feeder Pillar boxe / LT panels of any sizes at site with one coat of epoxy based paint DANCOT/Asian make shade / tint as approved including preparation of old painted surfacesand cleaning the rusted portion with emery sheet complete all as specified and as directed.

Supplying and laying in repair of Synthetic Rubber insulated mat of size 2m x1m x2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) IEC/BS EN 61111: 2009 BIS/ERDA/CPRI approved suitable for electrical shock safety complete all as specified and as directed.

Supply only MCCB four pole 630 Amps 50 KA 415 volts 50 Hz adjustable thermal magnetic setting conformingto IEC 60947-II, Ics = 100 % Icu adjustable over load setting Ir = (0.8 to 1.0) x In, short Circuit setting fixed, including making necessary alteration work for fixing MCCB, incoming and outgoing connection with suitable size of Al lugs etc. complete all as specified and as directed.Make :- Legrand /L&T/Havells/Indo Asian

Description all as described in item No.97 here in before but MCCB of capacity 400 Amps 36 KA.

Description all as described in item No.97 here in before but MCCB of capacity 250 Amps 36 KA.

Description all as described in item No.97 here in before but MCCB of capacity 200 Amps 36 KA.

Description all as described in item No.97 here in before but MCCB of capacity 160 Amps 25 KA.

Description all as described in item No.97 here in before but MCCB of capacity 125 Amps 25 KA.

Description all as described in item No.97 here in before but MCCB of capacity 100 Amps 16 KA.

Description all as described in item No.97 here in before but MCCB of capacity 63 Amps 16 KA.

Material and labour for Maintenance and repair to LT Panel board indoor / outdoor type of any capacity having 1 No Incomer & out going MCCB's up to 6 Nos (Max) by carrying out the following works:- (i) Cleaning incomer switches, bus bar & out going switches etc thoroughly by using blower. (ii) Replacement of rusted bolts & nuts, screws, thimble etc as per existing. (iii) Replacement of Indicator lamps, Volt meter, Amps meter, VSS, ASS as required as per existing. (iv)Replacement of Incoming / out going switches as per existing make & model. (v) Replacement of control wiring with suitable size as per existing copper wire (vi) Making the locking arrangement functional including welding if required (vii) Replacement of MV danger board (viii) making proper connections for out going / incoming cable by providing suitable thimble as required. Note:Replacement of MCCBs only shall be measured and paid separatly as 'Supply only' against respective item in this Schedule..

Material and labour for Intergral LED street light luminaire 60 watt new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07, necessary nuts and bolts, screws fixing on pole up to 9 m high from ground level/floor all as specified and directed by the Engr-in-Charge. Make :- Havells/Bajaj/Crompton

Material and labour for Steel tubular swaged poles complete with mild iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 of 11.0 metres long erected in position and painting 2 coats with aluminium paint over a coat of primer including taking down old unserviceable RCC pole andremoving the same from the site complete all as specified and as directed. Notes: (i) Make of Steel Pole : Singh Profile , Pune /India Electric Poles Mfg Co ,Maharastra /Bombay Tubes/Kalinga Tube (ii) Excavation, earthwork, foundation concrete and coping shall be measured and paid separately under relevant items in this BOQ.

Material and labour for Steel tubular swaged poles complete with mild iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31of 9.0 metres long ercted in position and painting 2 coats with aluminium paint over a coat of primer including taking down old unserviceable RCC pole andremoving the same from the site complete all as specified and as directed. Notes: (i) Make of Steel Pole : Singh Profile , Pune /India Electric Poles Mfg Co ,Maharastra /Bombay Tubes/Kalinga Tube (ii) Excavation, earthwork, foundation concrete and coping shall be measured and paid separately under relevant items in this BOQ.

Material and labour for Repairing and re winding of motor any type and of any capacity , any make by removing burnt copper winding and rewinding with super enamelled copper winding wire of suitable gauge, size and number of turns, providing insulating materials such as nylon tape, varnishing and baking testing and commissioning complete all as specified and as directed.

Disconnecting the Centrifugal pump of capacity 05 HP of any make and model from motor and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening and repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc. complete. Reassembling including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position at site, making all connections, commissioning and testing for smooth and noise free operation etc complete all as specified and as directed . Notes :- (i). Rewinding, Stator assembly, Rotor assembly, body,Ball bearing, shaft, impeller, bush, Gland plate & stuffing box packing, Cooling tube with Banjo nut, O ring, Shoulder ring , Gasket Packing, Vent valve, Gland rope and Set of rubber oil seal etc will be replaced if required (iii) The T & P/vehicles for transportation of centrifugal pump shall be arranged by the contractor and the cost deemed to be included in the quoted rate of this item

Material and labour for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, slice valve pit cover and frame, sheet, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing confirming to Fe 290 E -165 including Preparation of new steel surfaces and applying two coats of metalic paint over a coat of metalic primer complete all as specified and as directed.

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral drawn through in and including PVC casing capping of suitable size with all necessary fittings and provision of one run of Green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way including taking down old unserviceable aluminium wiring of any type complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as per description of serial item No.112. here in before but one 3 pin socket outlet 5 Amp on indipendent board using 2.5 sqmm cable

All as per description of serial item No.112 here in before but for for One 3-pin socket outlet 15 Amp on independent board with 4 sqmm FRLS PVC multistranded copper conductor cable including 4 sqmm FRLS PVC multistranded copper conductor cable as earth continuity wire.

Supply and fix in repairs Socket outlet 5 Amps,3/ 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Havells/Indo Asian

Supply and fix in repairs Socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Switch piano flush type single pole one way 5/6 amp complete all as specified and directed.. Make : Anchor/Havells/Indo Asian

Supply and fix Switch piano flush type single pole one way (multi pin) 16 amp complete all as specified and directed.. Make : Anchor/Havells/Indo Asian

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Dismantling the 2/4 pole structure including its connected fitting after removing the necessary incoming/outgoing cable carefully and the old meterial taken as schedule of credit complete all as specified and as directed.

Material and labour for Cleaning the outside premise of the substation/pump house including removing all the vegetations, dry leafs ,bushes and other foreign materials including necessary grass cutting etc complete all as specified and as directed.

Repair and maintenance of baffle range including all SWR rope, winges, chain,chain pulley and other moving parts, etc. Replacing the unserviceable bulldog grips, nut bolt, washers,etc and greasing the complete parts where ever necessary, repair and replacement of rusted motor beds complete all as specified and as directed.

Removing all existing old unused mud/sand, vegetations, tree root and clearing the area of substations and supply and laying stone aggregate 40 mm size in three inches thickness over a plastic sheet having minimum 25 microns to prevent vegitation growth complete all as specified and as directed.

RAHMAT ALI (BID ID -3069156)

RADHIKAGANESH ENTERPRISES (BID ID -3067871)

ELSOL ENGINEERS (BID ID -3066954)

DHAIRYASIL RAMAKANT DESAI (BID ID -3068097)