Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance H 205 ANAND VAS SHAKUR PUR DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | Admitted-Finance |
Tender Value
₹91.3 L
EMD Value
₹1.8 L
Closing Date
15 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer
The Executive Engineer, PWD North West Building, SU-Block, Pitampura, Delhi
(SH- Providing and Placing, Installation of siting arrangement for Classrooms, Computer labs, Committee Room and facility Rooms etc) tee Room and facility Rooms etc)
2023_PWD_250027_1
94/EE/PWD/NWB/2023-24
Open Tender
Civil Works
Works
45 days
Delhi
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹1.8 L
16 Nov 2023
8 Nov 2023
15 Nov 2023
8 Nov 2023
15 Nov 2023
8 Nov 2023
Amount
Manufacturing, Providing and placing of 3-Seater Student Desk cum Bench of overall size 1675mm(L) x 1090mm(D) x 700mm(H). The product shall be certificated by GREENGUARD GOLD, Indoor Advantage GOLD, GREEN PRO. The company shall possess the certificates from AIOTA Education Furniture, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and BIFMA standards as per approved sample and as per the direction of Engineer-In-charge.
All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are Welded together. The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.
Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138). The tubes are coated with min. 45 micron Thickness of epoxy polyester coating.
The storage shelves are made from 0.6 mm thk MS sheet (As per IS:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating.
Hooks are provided on the vertical side frames on both sides of the desk for hanging Bags/bottles. They are made from 2 mm thk MS sheet (As per IS: 513) and are coated with min. 45 micron thickness of epoxy polyester coating.
The under structure is assembled using M6 trilobular screws (As per DIN 7500) with Zn blue Plating (As per IS 1573:1986).
Pre-Laminated seat and back panels are assembled using M6 Countersunk trilobular Screws (As per DIN 7500) with Zn black plating (As per IS 1573:1986).
Spacers are provided on the top of round tubes for wooden panels fixing. They are made of PP Glass filled (30%).
Plastic Caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product.
M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of under structure to take care of unevenness in floor with height adjustment of approx 15mm. The work shall be done as per drawing and direction of Engineer-in-Charge.
Manufacturing, Providing and placing of panel & tile based modular workstations for Faculty of having 1200mm Partition Height and 750mm(Work Top Height) with partition thickness of 52 mm including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. All the dimensions will be as per the Original Manufacturer's Specifications. Company Certificates : AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Product Certificates : Greenguard (UL), IAQ Gold, GRIHA & SVAGRIHA, BIFMA Level 2 and Greenpro.
Panels Construction - There shall be two types of panel: Main panel & side panel each of thickness 52 mm and 23 mm respectively. Each panel shall have four horizontal divisions. Each panel consists of 2Nos of Vertical extrusions and Horizontal extrusions made of 1.2mm thick aluminium duly powder coated to the thickness of 40-50 microns at every division of tile/block. Each panel shall have section at bottom which comprises of L shape channels made of minimum 2mm thick CRCA steel , formed plates of 3mm thick HR steel & ERW steel tube of minimum size 34x15x1.6mm thick welded together. The complete frame at bottom shall be powder coated with 40-50 microns thickness The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with minimum 2Nos of Legs of height as per manufacturer which are fixed at the bottom frame of the panel. Legs are fabricated by MS Tube of section 35mm x 25mm with the MS base plate of 35x22x5mm , below which an Leveler is fitted which allows for adjustment of the height by 50mm. It will be coated with 40-50 micron thickness of epoxy powder coating. Each panel shall have four horizontal divisions of equal height as under:
(A) The top division of side panel shall be single fabric magnetic tiles on both sides. The upper division in one main panel shall have combination of two tiles consisting of glass writing tiles & fabric tackable tiles .The upper division in another main panel shall have fabric tackable tiles as per photograph. These tiles shall be slide in to the panels from top before fixing the top horizontal. (B)The middle two divisions of main & side panels shall have 2Nos 50 mm thick blocks consisting of minimum 38mm thick Paper Honeycomb or equivalent with minimum 2.75 mm MDF on each sides and minimum 0.6mm laminate on both sides. (C) The bottom division in main panel & side panel shall have single metal tiles both sides.The tiles shall be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. These bottom tiles shall be press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from PP polymer. Note:all provisions shall be made for forming conduits for passing cables as well as Cutting in panels tiles for electricals points inculding switchs and socket shall be done as site requirments and the cost for which is considered in this item only.
Tile Finishes : • FABRIC MAGNETIC TILES: Fabric magnetic tiles shall be fabric upholstered metal tiles in minimum 0.5 mm thick G.I. Grade O . The fabrics shall be upholstered with adhesives. • FABRIC TACKABLE TILES: Fabric tackable tiles shall be upholstered metal tiles in min 0.5mm thick G.I. grade O , with P.E. foam in the tile for tackablity. The fabric shall be upholstered with adhesives. Fabric shall be of min gsm 250-300. • GLASS WRITING BOARD TILES : Glass tiles shall be made of min 4.0mm thick toughened plain glass with diamond polish edge finish with white paint on oneside to make it a writable glass. • METAL TILES : Plain metal tiles are made of min 0.8mm Thick MS CRCA Grade D and powder coated with Epoxy Polyester Finish of thickness 40-50 microns. The colors for laminate, fabric, metal powder coatings and glass shall be as approved by engineer-in-charge.
Aluminium Trims : The top trims and end trims for 50.0mm shall be made from aluminum extrusion. All kinds of extrusions for 50.0mm shall have average wall thickness of minimum 1.2 mm & having finish of powder coating. Top trim in 50.0mm thick panel shall be press fitted on the horizontal extrusion, it shall be slide fitted with the help of top trim connector made from PP copolymer 3530 grade. End trim for 50.0mm thick panel shall be slide fitted with the help of end trim connector made from minimum 2.0mm thick M.S. CRCA Grade D.
Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Wires runs through the system from Bottom/Top tile and extended to the various locations by the help suitable Cable Ducts.Separate cable duct shall be provided for power and networking cables. Additional Cable duct made from minimum 0.8mm thick M.S. CRCA Grade D shall be provided where wires are exposed outside workstation panel. It is constructed with two parts, one is body & another is cover. It holds the cables & gives aesthetic appearance by covering all cables entry, which are moving upward to the panels. Necessary cable duct shall be provided on floor & walls to carry the cables & conduits upto bottom of panel.The color of metal cover for cable duct shall be powder coated matching the color of stone/tile/wall finish.
Worksurface : Worktop shall be made out of 25mm thick prelaminated particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with suitable covers. Worksurfaces are fitted to the panels by worksurface brackets which shall be as per manufacturer's specifications. The worktop supported on such brackets shall be able to take load of 90 kg.
Drawer Units with legs: 3 Drawer Unit having flat metal front and top with Central locking. Configuration: Box-Box-File 390mm (W) X 435mm (D) X 646mm (H). Construction & Material of Drawer Unit: Welded Assembled of 0.8 mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 mm thick CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking: 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism. Top Panel: 0.8 mm thick Metal Straight Edge Top. Castors: Swiveling non-lockable Castors mounted below the body shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).
Key Board Pullout Tray : Supplying and Fixing of sliding computer key board tray of 480mm (L) X 280mm (D) X 40mm(H) made out of CRCA steel as per IS : 513 made of 0.9mm thick powder coated with sliding channels and other fixing fittings. It should also have a sliding system for accomodating mouse.
CPU Trolley : Supplying and Fixing of CPU Trolley of Size - 345mm(W) x 226(D) x 180mm(H) is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet. It consists of 4Nos Non-lockable twin wheel castors made of injection moulded in Black Nylon. The work shall be done as per drawing and direction of Engineer-in-Charge.
Workstation : Size 1200mm (L) x 600mm (D) x 1200mm (H)
Manufacturing, Providing and placing of panel & tile based modular workstations for Faculty of having 1200mm Partition Height and 750mm(Work Top Height) with partition thickness of 52 mm including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. All the dimensions will be as per the Original Manufacturer's Specifications. Company Certificates : AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Product Certificates : Greenguard (UL), IAQ Gold, GRIHA & SVAGRIHA, BIFMA Level 2 and Greenpro.
Panels Construction - There shall be two types of panel: Main panel & side panel each of thickness 52 mm and 23 mm respectively. Each panel shall have four horizontal divisions. Each panel consists of 2Nos of Vertical extrusions and Horizontal extrusions made of 1.2mm thick aluminium duly powder coated to the thickness of 40-50 microns at every division of tile/block. Each panel shall have section at bottom which comprises of L shape channels made of minimum 2mm thick CRCA steel , formed plates of 3mm thick HR steel & ERW steel tube of minimum size 34x15x1.6mm thick welded together. The complete frame at bottom shall be powder coated with 40-50 microns thickness The Bottom Frame is bolted with the Upright verticals. Each Panel is provided with minimum 2Nos of Legs of height as per manufacturer which are fixed at the bottom frame of the panel. Legs are fabricated by MS Tube of section 35mm x 25mm with the MS base plate of 35x22x5mm , below which an Leveler is fitted which allows for adjustment of the height by 50mm. It will be coated with 40-50 micron thickness of epoxy powder coating. Each panel shall have four horizontal divisions of equal height as under:
(A) The top division of side panel shall be single fabric magnetic tiles on both sides. The upper division in one main panel shall have combination of two tiles consisting of glass writing tiles & fabric tackable tiles .The upper division in another main panel shall have fabric tackable tiles as per photograph. These tiles shall be slide in to the panels from top before fixing the top horizontal. (B)The middle two divisions of main & side panels shall have 2Nos 50 mm thick blocks consisting of minimum 38mm thick Paper Honeycomb or equivalent with minimum 2.75 mm MDF on each sides and minimum 0.6mm laminate on both sides. (C) The bottom division in main panel & side panel shall have single metal tiles both sides.The tiles shall be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. These bottom tiles shall be press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from PP polymer. Note:all provisions shall be made for forming conduits for passing cables as well as Cutting in panels tiles for electricals points inculding switchs and socket shall be done as site requirments and the cost for which is considered in this item only.
Tile Finishes : • FABRIC MAGNETIC TILES: Fabric magnetic tiles shall be fabric upholstered metal tiles in minimum 0.5 mm thick G.I. Grade O . The fabrics shall be upholstered with adhesives. • FABRIC TACKABLE TILES: Fabric tackable tiles shall be upholstered metal tiles in min 0.5mm thick G.I. grade O , with P.E. foam in the tile for tackablity. The fabric shall be upholstered with adhesives. Fabric shall be of min gsm 250-300. • GLASS WRITING BOARD TILES : Glass tiles shall be made of min 4.0mm thick toughened plain glass with diamond polish edge finish with white paint on oneside to make it a writable glass. • METAL TILES : Plain metal tiles are made of min 0.8mm Thick MS CRCA Grade D and powder coated with Epoxy Polyester Finish of thickness 40-50 microns. The colors for laminate, fabric, metal powder coatings and glass shall be as approved by engineer-in-charge.
Aluminium Trims : The top trims and end trims for 50.0mm shall be made from aluminum extrusion. All kinds of extrusions for 50.0mm shall have average wall thickness of minimum 1.2 mm & having finish of powder coating. Top trim in 50.0mm thick panel shall be press fitted on the horizontal extrusion, it shall be slide fitted with the help of top trim connector made from PP copolymer 3530 grade. End trim for 50.0mm thick panel shall be slide fitted with the help of end trim connector made from minimum 2.0mm thick M.S. CRCA Grade D.
Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Wires runs through the system from Bottom/Top tile and extended to the various locations by the help suitable Cable Ducts.Separate cable duct shall be provided for power and networking cables. Additional Cable duct made from minimum 0.8mm thick M.S. CRCA Grade D shall be provided where wires are exposed outside workstation panel. It is constructed with two parts, one is body & another is cover. It holds the cables & gives aesthetic appearance by covering all cables entry, which are moving upward to the panels. Necessary cable duct shall be provided on floor & walls to carry the cables & conduits upto bottom of panel.The color of metal cover for cable duct shall be powder coated matching the color of stone/tile/wall finish.
Worksurface : Worktop shall be made out of 25mm thick prelaminated particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with suitable covers. Worksurfaces are fitted to the panels by worksurface brackets which shall be as per manufacturer's specifications. The worktop supported on such brackets shall be able to take load of 90 kg.
Key Board Pullout Tray : Supplying and Fixing of sliding computer key board tray of 480mm (L) X 280mm (D) X 40mm(H) made out of CRCA steel as per IS : 513 made of 0.9mm thick powder coated with sliding channels and other fixing fittings. It should also have a sliding system for accomodating mouse.
CPU Trolley : Supplying and Fixing of CPU Trolley of Size - 345mm(W) x 226(D) x 180mm(H) is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet. It consists of 4Nos Non-lockable twin wheel castors made of injection moulded in Black Nylon. The work shall be done as per drawing and direction of Engineer-in-Charge.
Workstation : Size 900mm (L) x 600mm (D) x 1200mm (H)
Manufacturing, Providing and placing UPBEAT DESK based modular Desks with height - 750mm. UNDERSTRUCTURE: Comprising of metal cross member between legs, DFINE PLUS legs made up of metal finish on end and shared leg with wire tray raiser the entire assemply is fixed to the worktop. Wire Management : Shared leg with wire tray raiser is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for accessing switches. To carry wires forward through w/s wire tray assembly is provided below worktops. MODESTY PANEL: Porforated metal modesty 0.8 mm thk.modesty is mounted under neath the worktop with the help of the brackets. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w X 600 mm d. Pedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file & metal keyboard tray. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. The product should be certified with Greenguard (UL), AIOTA for Education Furniture and company shall posses ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample and as per the direction of Engineer-Incharge. The work shall be done strictly as per drawing and direction of Engineer-in-Charge.
Manufacturing, Providing and placing of Round tables of size 900mm (Dia) x 725mm (H). The table worktop shall be made up of 25mm thick Pre-Laminated Both with both side lamination. The table shall have knocked down understructure made from 8mm HR plate with levelers and a vertical support tube of diameter 90mm having 2mm thickness duly powder coated to the thickness of 50+/-10 microns. The product should be certified with Greenguard (UL), AIOTA for Education Furniture and company shall posses ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample The work shall be done as per drawing and direction of Engineer-in-Charge.
Manufacturing, Providing and placing the mid back revolving chair for faculty. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors).
The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm- (First Floor Workstations)The Product should be certified with Indoor Advantage GOLD,GRIHA & SAVGRIHA, Greenpro. Comapny certificate AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 complete as per approved sample The work shall be done as per drawing and direction of Engineer-in-Charge.
Manufacturing, Providing and placing of revolving chair for Computer Lab Workstations have overall dimensions 75cm (W) x 75cm(D) x 85cm (H) - 95cm, Seat Height : 40 - 50 cm. Broad backrest: Flexible mesh backrest ensures back support in every posture. Wide armrest: Offers ample support to elbow and forearms while working on laptop. Attached to the backrest, it offers stability andAdjustable lumbar support: Supports lower back in preferred sitting postures.Ergonomic seat cushion: Provides sufficient space behind the knees (popliteal region), allowing you to lean back in comfort.Work Chair is durable, easy to move around lean back in and keeps the body supported at all times. The work shall be done as per drawing and direction of Engineer-in-Charge.
Manufacturing, Providing and placing of High back chair.The overall dimensions of the chair shall be 76cm x 76cm x (113.6-131.1cm). The seat height shall be 44cm-54cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 75cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.5cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted fro 7cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors.
Manufacturing, The pedestal is 66cm pitch center dia. The product should be certified with Indoor Advantage GOLD, GRIHA & SVAGRIHA, BIFMA Level 2, GREEN PRO, GREENGUARD. The company should be certified with AIOTA, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, BIFMA standards complete as per approved sample The work shall be done as per drawing and direction of Engineer-in-Charge.
LAXMAN
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .